The errors of the blue screen of death (BSOD) are probably the most annoying type of error. A very frustrating BSOD error is PAGE FAILURE IN UNPAID AREA . Assuming you are here for help, I will explain the details about this error along with the methods to fix it .
What is PAGE FAILURE IN UNPAID AREA Error?
The Nonpaged area is a memory compartment that contains data that is critical to the operation of the system. This data is always needed and therefore instead of exchanging the data between the RAM and the page file, the data is constantly stored in the RAM, in the non-paged area. Basically this area is where the data that should not be moved from RAM to the page file is stored. When Windows is unable to access critical memory data that was supposed to be stored in the Unpaged area, for some reason, the error PAGE IS MISSING IN UNPAID AREA is born.
This error can occur on a desktop computer and a laptop running Windows XP, Vista, 7, 8, 8.1, and 10 . While facing this error, you may see error codes like STOP: 0X00000050 , STOP: 0x50, etc. However, it can sometimes also appear with names such as ntfs.sys or ntoskrnl.exe .
Due to this problem, the system restore may stop working, the system may frequently start to crash, lose data, hardware fail, or even a complete loss of access to the PC may occur.
Causes
There are various causes for the development of the page BSOD error in a non-paged area on different systems. You must learn the superficial knowledge about the causes to learn how to fix this error. I will tell you about the common causes that could be causing the problem. These are the possible causes:
- Corrupt, outdated, or incorrectly configured device drivers, especially graphics card drivers.
- Damaged or damaged sectors on the hard drive on which you have installed Windows.
- Some fault in the RAM.
- Page memory disabled or incorrectly configured in System Properties.
- Disabled or interfering antivirus software, especially Windows Defender in Windows 10.
There may be other reasons as well, but I provide solutions regardless of the exact reason.
Page error in a non-paged area Windows installation is one of the most common searched queries , as this error usually appears when installing Windows 10 or any other Windows operating system
How to fix a page fault in a non-paged area
Provided the list along with the guide of best methods to correct this error without doing too much work. You can test any method selectively, or you can test them one after another.
1. Repair faulty controller
Sometimes when you update a driver, it might not update properly and therefore starts to cause problems. In this method, you also need to search for such troublesome drivers and repair them. Follow these steps:
Step 1: Hold down Windows key + R to access the Run dialog . Type devmgmt.msc in it and press Enter to open Device Manager .
Step 2: Now right click on the device whose driver you recently updated and go to Properties .
Step 3: Switch to the Driver tab and then click Revert Driver option . Then click Ok .
Step 4: If such option is not present on your system, click on the Uninstall option .
Step 5: Restart your PC to reinstall the drivers automatically.
or ,
You can also repair and update faulty drivers using third party software like Driver Talent , Driver Easy , etc. Using these apps is like having a piece of cake. Just open them and follow the instructions that appear on your screen
Done. This could have fixed the error on your system. If the error persists, try the next method.
2. Adjust the Paging File Manager
If the hardware and drivers are working fine, you still face the Page Fault in Non-Paged Area error. This method will work perfectly for you. Follow these steps:
Step 1: Open the Control Panel . You can do this by typing control in the Run or Search box .
Step 2: Now click on System to access it.
Step 3: Move your cursor to the left side and click Advanced System Settings .
Step 3: Now switch to Advanced tab and click Settings under Performance option .
Step 4: Now also switch to Advanced tab and click Change… in Virtual memory option .
Step 5: Then uncheck the “Automatically manage paging file size for all drives” checkbox . Also, select the No paging file option and click Set .
Step 6: Keep clicking OK until you close all Windows dialog boxes and then restart your computer.
Step 7: Now back to pass in the Step 1 to the Step 4 . For the next action, this time check “Automatically manage the size of the paging file for all drives” and select Size administered by the system . Click Set and complete the process.
Done. You have completed the procedure. This may have solved the problem. If not, scroll down to the next method.
3. Run Check Disk and Memory Check
If corrupted RAM or faulty NTFS volume is the cause of Page Fault in Non-Paged Area error on your Windows 10, 8, 7 PC, then this method will solve your problem. Follow these steps to correct the error:
Step-1 Press Windows key + S simultaneously to access the search box and then type cmd in it.
Step 2: Now right click on the command prompt and click on Run as administrator .
Step 3: At the command prompt , type chkdsk / f / r and then press Enter .
Step 4: Then press Y on your keyboard. Wait until the process completes.
Step 5: Now press Windows key + R simultaneously to open the Run dialog . Type mdsched.exe and press Enter to access the Windows memory diagnostic window .
Step 6: Then click Restart Now and check the trouble options (recommended) . Your PC will then restart.
Step 7: Wait patiently for the process to complete. It may take about 15 minutes .
Done. This must have solved your problem. If the problem persists, try another method mentioned below.
4. Use the last known good configuration
This method worked accurately for many users. You can test it by following these steps:
Step 1: turn off your PC. Now start your PC. During startup, you will see a black screen .
Step 2: When white text starts to appear on this black screen , press and hold the F8 key (hold down F2 if F8 doesn’t work for you). Hold down the key until you see the Windows Advanced Options Menu.
Note: In Windows 8, 8.1 and 10, you must first enable the F8 key .
Step 3: From the list of options that appear on your screen, select the Last Known Good Configuration and press Enter . Your PC will restart and the error will be temporarily fixed.
Step 4: Turn off and start your PC again, but this time press and hold the F12 key (hold down F10 if F12 does not work if any) when the display white text on the screen in black .
Step 5: In the list of available options, find and select Disable memory cache , save the settings and exit .
Step 6 : restart your PC and let it boot completely.
Step 7: Now press Windows key + R to open Run . Type chkdsk / f / r C: into it and press Enter .
Step 8: Wait patiently for the process to finish.
Done. You have successfully solved the problem like a pro. However, there are more ways if you still want to try. Move to down.
Resolve page fault in non-paged area Windows 10, 8, 7, XP
Sometimes simple methods work like charm compared to complex ones. Here are some easy methods you should try to fix page fault in non-paged area of Windows 10.
Fix by disabling or uninstalling antivirus
If the antivirus program is causing the problem on your system, you should try to disable or uninstall the antivirus software. Then check if the error is gone.
Note: Disabling or uninstalling antivirus is a risky action and is not permanently recommended.
Windows 7 Fix
If RAM is the main culprit for this error, you should open the outer CPU panel and check if the RAM is having problems. You need to remove the RAM, clean it wisely, and then reinsert it properly. Then restart your PC and check the error.
Note: RAM is a delicate part of your computer. You must handle it with care or you could permanently damage it.
Page_Fault_in_Nonpaged_Area Windows 8, XP Fix
Do the action mentioned in the picture.
Modern systems also allow you to restore your PC to its factory default state by accessing the Recovery Partition . You can get information about the procedure on your manufacturer’s website.
Or,
if you want to access the Recovery Manager within Windows, first click the Start button and then All Programs . Now select and open the Recovery Manager . Then proceed with the recovery process .
Note: Before proceeding with the recovery process, make sure that you have completely backed up your computer data elsewhere as the recovery process will uninstall all previous programs and erase the multimedia content on your PC / HDD.
Conclution
These were the best and most effective working methods available to fix page fault in non-paged area in Windows XP, Vista, 7, 8, 8.1 and 10. You have successfully cleared the error if you applied any of the methods correctly . Now you can enjoy using your PC without getting the BSOD error message on your screen.
