Cervical spine

Cervical Region The spinal column is made up of 24 bones, called vertebrae. The first 7 vertebrae form the cervical spine. Technically we refer to them as vertebrae C1 to C7. The cervical spine begins where the upper vertebra (C1, atlas) connects to the base of the skull. The first vertebrae form the cervical spine. The cervical spine is the most mobile segment of the spine. It consists of seven vertebrae and in addition to eight pairs of cervical nerves.

Summary

[ hide ]

  • 1 Morphological characteristics of the cervical vertebrae
  • 2 Most frequent conditions
  • 3 Cervical region of the spine
  • 4 Characteristics of the cervical vertebrae
    • 1 Characteristics of the typical vertebrae of the cervical region
  • 5 Movements Cervical region
  • 6 Irrigation of the cervical spine
  • 7 Venous drainage
  • 8 Source

Morphological characteristics of the cervical vertebrae

The cervical region is one of the most mobile and multiple conditions are frequent in it, most of them with cervical syndrome. Among the clinical manifestations of cervical syndrome is the characteristic symptomatic triad, consisting of cervical pain, stiffness, and symptoms associated with vertigo. Globally, an annual incidence of cervical pain is estimated at 83 cases per 100,000 inhabitants between the ages of 13 and 91. In Cuba , a high incidence and prevalence of disorders of the osteomyoarticular system has been reported. Approximately 50% of the population suffers at some point in their life from musculoskeletal disorders, having reported that between 24% and 38% of patients suffer from cervical pain.

Most frequent conditions

The most frequent conditions are cervical spondylosis, osteoarthritis , osteoarthritis , hernias and degenerations of the intervertebral discs. Cervical spondylosis, usually beginning in early middle life, is osteoarthritis of the cervical spine causing stenosis of the spinal canal (canal) and sometimes cervical myelopathy due to bone compression of the spinal cord. Osteoarthritic bone growths, such as bone hypertrophy (formation of osteophytes), most often between C5 and C6 and between C6 and C7, can produce compression of a nerve root that usually causes varied symptoms. The nerve roots can also be compressed by a hernia.

Cervical region of the spine

Each element of a vertebra has morphological characteristics that allow it to recognize the region to which it belongs.

The cervical vertebrae are located between the skull and the thoracic vertebrae . The position of the cervical vertebrae, as the cranial end of the spine, implies that they support a lower weight, so their bodies are smaller than that of the underlying vertebrae. The intervertebral discs are thinner than those in the lower regions.

Characteristics of the cervical vertebrae

The cervical vertebrae, which differ by presenting individual characteristics different from the general ones, are:

  • the atlas: It is the first cervical vertebra (C1), its name refers to the mythological titan who held the celestial vault on his shoulders. It does not have a body or a thorny process, but has an anterior and a posterior arch, which are joined by the lateral masses. Each lateral mass has a concave, ellipsoid-shaped upper joint facet. This facet articulates with the condyle of the occipital bone. On the underside of each lateral mass there is a flat articular facet to articulate with the axis. The transverse process arises from the lateral aspect of the lateral mass, which is longer than that of the other cervical vertebrae. Both arches have, in the midline, an anterior and a posterior tubercle respectively, having a very large vertebral foramen. It articulates with the axis tooth through a joint surface called a dental fossa. The groove of the vertebral artery is seen on the superior aspect of the lateral end of the posterior arch. The first cervical nerve passes behind the lateral mass.
  • the axis: it is the second cervical vertebra (C2) and its name means axis. It has a vertical eminence that is directed upwards from the upper end of its body called the axis tooth (odontoid process) and around it rotates the atlas next to the skull. It presents on its anterior face an articular surface to articulate with the dental fossa of the atlas in the medial atlantoaxial joint and on its posterior face, the posterior articular facet, for the transverse ligament. On both sides of the axis tooth, it presents two articular surfaces to articulate with the atlas in the lateral atlantoaxial joints. They have two inferior articular facets, for the third cervical vertebra. The thorny process is wide and short.
  • the sixth: The sixth cervical vertebra (C6), is characterized by the greater development of the anterior tubercle of its transverse process, which due to its importance for compression of the common carotid artery during surgery, has been called the carotid tubercle.
  • Seventh vertebrae: the seventh cervical vertebra (C7), is a transitional vertebra, and has some characteristics that resemble a thoracic vertebra. The end of its spinous process does not bifurcate, it is especially long and makes relief under the skin, that is why it is called a prominent vertebra and is easily palpable. Transverse processes are unitubercular, have no transverse hole, or are very small.

Characteristics of the typical vertebrae of the cervical region

They are from the third to the sixth and have the following characteristics:

  • The body is made up of highly vascularized spongy tissue, covered by a thin layer of compact bone tissue. It is approximately cylindrical in shape, occupies the anterior part of the bone, is arranged vertically and its fundamental function is that of support. Its transverse diameter is greater than the anteroposterior diameter and has some details that distinguish it. At the lateral ends of its upper face it presents two small eminences, the uncinate (hook-shaped) processes, arranged as a semilunar elevation of the lateral edges. At the lateral ends of the lower face of the body there are two small notches that serve to articulate with the uncinate processes of the underlying vertebrae, giving this face a convex shape.
  • Vertebral arch, the vertebral laminae are flattened and quadrilateral, they form most of the posterolateral wall of the foramen or vertebral foramen. The medial and posterior end of each lamina is confused with the base of the spinous process (apophysis). They present a posterior aspect covered by the deep muscles (mm) of the back. In general they are arranged in an oblique plane down and behind. It joins at its anterior ends to the posterolateral limits of the body. This arch is concave forward. The vertebral foramen is triangular, large in relation to the body and with a broader anterior base, corresponding to the thickness of the spinal cord at this level. Its function is fundamentally of protection.
  • The vertebral pedicles are implanted in the vertebral body at a point closer to its superior face than to the inferior one, they are two irregularly cylindrical, flattened, thin and narrow bone portions that are located at the anterior ends of the vertebral arch. They extend from the back and side of the vertebral body to the junction of the base of the transverse process with the two joint processes on each side. Each pedicle has two vertebral notches, one at its upper edge and one at its lower edge. These notches overlapping with those of the neighboring vertebrae, forming on each side of the vertebral column a series of holes called intervertebral foramina. The short distance between the body and the articular processes in the cervical region determines that these holes are narrow at this level.

Cervical region movements

The movements between two neighboring vertebrae are not wide. However, thanks to the large number of bone segments of which the spinal column is made, the small movements between isolated vertebrae, when added together, give it wide mobility, the cervical region being among the most mobile. The following movements are possible:

  • In the frontal axis flexion and extension (ventral flexion and dorsal flexion).
  • Sagittal axis right lateral flexion and left lateral flexion.
  • With the combination of angular movements, around the frontal and sagittal axes, circumduction movements are performed.

Irrigation of the cervical spine

It is in charge of the posterior spinal arteries that penetrate the vertebral canal or spinal canal through the intervertebral foramen, these branches come from the vertebral artery, from the deep cervical and from the anterior or ascending cervical (inferior thyroid branch).

Venous drainage

It is performed by veins that correspond to the aforementioned dorsal spinal arterial branches, accompany them in the intervertebral foramen and form a true plexus around them. They flow into the vertebral veins.

Leave a Comment

Scroll to Top