Stop code irql not less or equal windows 10.. In this article we are going to tell you what you can do if you are receiving the IRQL NOT LESS OR EQUAL BSOD , and why it appears on your PC.
- IRQL Errors WITHOUT LESS OR EQUAL is a BSoD that usually occurs when Windows The cause of this is an outdated or incompatible driver or faulty software / hardware.
- What you need to do is isolate the cause: start by running memory diagnostics to rule them out, do driver updates, check for new software installed, or disable memory caching in the BIOS.
- If you have a Windows blue screen, check the error code for more information. Use our troubleshooting BSoD Hub to find out how to resolve the issue.
- Visit our Windows 10 Error Troubleshooting Section for similar articles that cover many different areas and issues.
How to stop code irql not less or equal windows 10
- Start your computer in safe mode
- Check your memory and hardware
- update or restore
- Repair your registry to repair corrupt files
- Check your disk for errors
- Run a full system check
- Clean Windows Install on PC
As I mentioned before, there are many causes and therefore different solutions for this problem. We will try to cover all the bases and solve the problems for each cause individually, so that you can apply the solution that best suits your needs.
Before we start, like all Windows errors, make sure you have all updates and updated drivers installed for all your devices.
Did you know that most Windows 10 users have outdated drivers? Take this guide a step further.
Run a system update that will apply any new patches for your operating system and look for the latest drivers for your components and peripherals (visit the manufacturer’s website to see which is the latest driver for each device).
If you have problems updating your Windows 10, check out this guide that will help you quickly resolve them.
Also, you can check for updates to the third-party software you are using and, if you get a chance, try updating the BIOS.
Does updating the BIOS look daunting? Make things easier with the help of this handy guide.
Another step to follow that can help you avoid most of the troubleshooting process is to look in the “Event Viewer” for information about the error (to open the Event Viewer, open the Search button and type “Event Viewer”). events “and select utility).
In the window that opens, search the logs for the error found (each record has a timestamp, which will help you determine which device caused the problem) until you find the error.In the details, you will see where the problem originated and find a recurring error caused by the same device; that was the cause.
1. Start your computer in safe mode
Windows 10 offers users the possibility to start their computer in the configuration called “Secure Boot”, which is the old safe mode that we had in previous versions of the operating system.
By using this method and setting it to the “Minimum” setting, you can start your Windows 10 computers with minimal resources, drivers and processes.
This ensures that you are using a clean environment, free from drivers and third-party applications.
This method can have one of two outcomes: either the system will work as intended; therefore, the problem might be with one of the third-party applications or drivers that you have installed on your computer, or it will again crash, letting you know that the problem has a deeper root, perhaps within the hardware.
Once you have an answer to this question, you can go ahead and fix it by removing any other possibilities.
These are the steps to follow to start your Windows 10 computer in safe mode:
- Hold down the Shift key and click on the on/off button on the screen
- Select the restart option while holding the Shift key
- Select Troubleshooting> Advanced options> Startup settings> press Restart
- Wait until Windows 10 restarts and select Safe Mode.
- Check if the problem persists.
If I pass 1 It showed that the problem is not related to the software you have installed on your computer, now you can try debugging your computer at the hardware level.
As we mentioned at the beginning, the irql_not_less_or_equal error usually occurs when something tries to access a memory location for which you don’t have permission.
The first thing to do in this case is to test your device’s RAM. Windows offers a utility that can do this for you.
See how to use this utility:
- Open the Search button > type ” Memory Diagnostics” > Open Windows Memory Diagnostic Utility.
- In the new window that opens, select one of the two available options. The first will restart Windows immediately and let the system scan the RAM.
- If he returns an error, you will have your answer. Replace your computer’s RAM and everything should be working properly.
- On the other hand, if the verification does not return an error, the problem is elsewhere.
Optional: If your motherboard BIOS has the Memory Cache function, then you must disable this function. Be aware that operating in the BIOS environment can be dangerous, so don’t try to change other settings if you don’t know what they do.
Checking the hardware is a tedious process. You will need to disconnect all connected and non-essential devices from your computer (which basically means everything except the mouse and keyboard) and then disable the drivers.
After reboot, check that all drivers are still disabled and one by one re-enable and reconnect devices.
Do not connect or activate more than one device at a time! Just one at a time and use your computer and device after connecting it.
If the error does not appear, this driver is cleared and you can move to the next one. Do this until you add and activate all devices or until the BSOD appears.
If the last one occurs, it means that the last activated driver is the problem. Type Safe Boot, completely uninstall the driver and try to download the latest from the manufacturer and install it.
If it still doesn’t work, this driver has a compatibility issue with Windows 8.1 or Windows 10)
Optional: If the BSOD appears after a driver update, try rolling back the driver and see if the problem persists. Enter Device Administrator and locate the driver in question, right-click and select “Properties”. In the “Driver” tab you will find the option to roll back the driver.
Update or restore
Windows 10 gives users the ability to update computers by resetting all settings to their default values. This option will not affect any personal files you have on your computer, so you can run them without fear of data loss.
However, if you face a critical error and Windows deletes all your files in the update process, don’t panic yet. We’ve written a lot about this and our guide will surely help you recover all your files.
A system restore This is a viable option if the error manifests itself after installing various third-party drivers and software. For this to work, you must have created a restore point before installing the software.
It’s a good habit, and creating restore points can be a lifesaver. If you have a restore point, you can return to that state, but all information added to the drive will be deleted after the restore point is created.
Yes System Restore is enabled, please follow the instructions listed below for Windows 10:
- Go to Search>Type SystemProperties > Open System Properties.
- Go to System Protection > click System Restore.
- Click Next> choose your preferred restore point in the new window.
- After selecting your preferred restore point, click Next > click Finish.
- Your PC will restart and the restoration process will start.
Check your disk for errors
Speaking of corrupt files and errors, your disk might also trigger the irql_not_less_or_equal error. If you’ve already applied the first solution listed in this guide and checked your RAM, try checking your disk as well.
On Windows 10, you can quickly run a disk check using the system.
Start system symbol as administrator and type the chkdsk C:/f command followed by Enter. Replace C with the letter of your hard drive’s partition.
