Creating an HP All-in-One Printer product is quite easy. The instructions that come with the product, as well as some common sense, can easily guide you through the process. However, there are some tips that will make the process go smoothly. Follow this route to all-in-one printing nirvana: Need HP All-in-One Printer
Instruction Manual Show more instructions.
How to set up an HP All – in-One Printer
1.Remove the new printer from the box. Besides the styrofoam and plastic packaging materials, the printer will have some tape and cardboard to protect the fragile, moving parts. Set these pieces aside as you remove them, in case you need them later.
2. Connect the power cord and AC adapter to the printer. The power cord must be connected to a surge protector to allow safe operation.
3 loading ink cartridges and printer paper after power on. Follow the procedures described in the owner’s manual. Make sure the ink and paper are loaded correctly before turning off the instrument.
4 Install the included software and product drivers. The all-in-one printer had to come with a software and driver disk. Before connecting the new printer to your computer, make sure that the appropriate software is fully installed.
5 Turn on the printer and plug the supplied USB cable into a USB port on your computer. Because the correct drivers have already been installed, the computer will search and find how new all-in-one hardware is appropriate.
6 Print a test page to make sure the connection between your all-in-one CV printer and your computer is complete.
