The iTunes application, created by Apple developers, is an almost indispensable tool for iPhone and other “apple” users. In addition to numerous entertainment features, iTunes allows you to restore the device on the iOS platform after a software failure, then return the information from the backup. With all the positive aspects of the program, which bring undeniable benefits to owners of iPhones, there is a spoonful of tar in the form of frequent errors with different codes that indicate the type of failure and the possible cause. Among the problems associated with the connection of USB, when updating or restoring the iPhone often appears in iTunes window with information about the failure of the code 2005. The culprit of this error may be mechanical damage to the cable, in which case the problem is solved simply by replacing the cord. but often the real reasons are unknown, and the system cannot recognize exactly why the failure occurred. The treatment will be effective if you fix the source of the 2005 iTunes error, sometimes you have to try several methods before solving the problem.
Troubleshooting options for 2005 in iTunes.
Ways to fix the 2005 error
The problem with restoring or updating “apple” devices, caused by various reasons, can be solved by software or hardware. In our case, the code indicates a faulty USB connection, so consider solutions that help restore the correct connection between devices.
Method 1: Replace the USB cable
Since the 2005 iTunes error indicates that it is impossible to continue the procedure due to a connection failure, which is usually associated with a cable failure, let’s start by checking it. The cord must be inspected for kinks, twists, and other damage, and any noticeable defects may cause a 2005 error. If a non-genuine cable is used, it must also be replaced.
Method 2: Use another USB port
Often the problem is in the connector, so if the cable is OK, you should try to connect it to another USB port. In the case of a desktop computer, it is advisable to connect from the back of the system unit, for a laptop there is no difference, but it is undesirable to use port 3.0, which is visually different from the others in blue. You should not use additional USB devices, as they can also provoke an error in iTunes. The connection must be made directly from a PC or laptop, and no other devices or gadgets must be connected at the time of the recovery operation. If the cable and USB port are working, look for the problem elsewhere. Often a trivial restart of the computer instantly allows trouble.
Method 3. Update drivers
Outdated or damaged drivers do not help the devices to interact at all, so they need to be updated. After restarting the computer, we try to restore the process of working with the iPhone, and if the error 2005 appeared again, we proceed to further actions to eliminate it.
Method 4: Update iTunes
Its version also plays an important role in ensuring the correct operation of the program. If you are using an outdated version, it is recommended to update the program to the latest existing version using the official source. You can see how fresh your program is in the “Updates” section of the help menu. If you have the latest version of iTunes, but the application still issues a 2005 error, you should restart.
Method 5. Repeat the program
In some cases, a complete solution is to completely remove iTunes and then reinstall the program. The uninstall process is performed by accessing the partition of the software installed on the computer using the control panel, after which you can reinstall the latest available version of iTunes.
Method 6: Use another computer
Sometimes it’s easy to use another PC to fix the problem. Of course, to perform the procedure, you need to download and install iTunes, and then connect the iOS device directly to your computer or laptop.
Method 7. DFU mode
For all “apples” in emergencies, one of the emergency modes, called DFU (Device Firmware Update). It is used to restore the firmware of devices on the iOS platform. You can enter iPhone in this mode as follows:
- Turn off the device.
- Connect the device to the computer.
- Press the “Power” button for 3 seconds, then, without releasing it, also press “Home”. After 10 seconds, release the power button, but not “Home”, hold the latter until the device is detected in DFU mode by the computer.
- After that, iPhone and iTunes will go into recovery mode, which we need, and all subsequent actions will be coordinated by the system.
If none of the solutions has brought the desired result, then there is nothing left but to contact the service to diagnose and troubleshoot hardware problems. It is better not to carry out any manipulations with the device independently without the corresponding skills.
