How to connect the DVR to PC

There are many reasons why the direct process of copying from a DVR to a PC is not possible. First, many DVRs do not have the ability to connect via USB or Firewire. Second, the file systems and video files used by DVR manufacturers are typically Linux-formatted and are often proprietary, making direct copy extremely complex and incompatible with Windows and Mac environments. Third, hardware manufacturers are trying to prevent this – they do not want to make copying information easy. Tips for using the DVR:

How to connect the DVR to PC

1. Most DVR models require a cable. It is strongly recommended that you test all details and, if necessary, set up remote network access.
2. The DVR should be placed in a cool place without dust.
3. Do not install or remove the hard drive while the DVR is turned on.
4. Turning off the DVR during playback or recording may damage the hard disk.
5. To extend the service life of wires waterproof protective coatings.
6. To prevent electromagnetic interference, try to avoid high-voltage lines nearby.
7. To ensure better image quality, beware of lighting problems when installing cameras.

How to connect the DVR to a computer.

Before setting up a DVR, make sure you:

• The cameras were connected to the DVR using the cables included.
• Connect the DVR to the monitor (make sure it supports 1280×1024 resolution).

An Ethernet cable is used to connect the DVR to the router and access the Internet at high speed.

Registrar settings

Before connecting the DVR to a computer, you need to determine what outputs are on the DVR. As an example, consider the back panel of the Motorola DCT6208. Of the 4 ports available on this DVR for video (DVI, Video / Audio Out, S-Video and Firewire), Firewire is the only one that transmits both video and audio. Because you only need to be active on one connection, this is the easiest way to do it. In addition, many computers are already equipped with FireWire, so you do not have to buy a video capture card. If this is not the case, use DVI with Audio Out. If your DVR model does not support DVI, connect via Video / Audio. The last option is S-Video. You will also have to use Audio Out. This DVR does not support the latest HDMI standard and USB connection, transmits audio and video faster than any other alternative.

Step 1:

• Connect the DVR network port to the computer’s RJ45 port (LAN network cable).
• Turn on the DVR.

Step 2:

• From the menu, select Network settings. As a rule, there are two options. One is called “Get IP address automatically” and the other is called “Use next IP address”. Choose the second.
• After selecting this option, you must specify the IP address of your DVR. Just enter a simple IP address. For example, select “192.168.1.20” and the subnet mask “255.255.255.000”. Apply settings.

Computer settings

To connect the DVR to a Windows computer, go to Control Panel / Network and Sharing Center:

• Here, select the option “Change adapter settings” – “LAN connection”.
• Double-click on it. The properties window opens.
• Find “IP version 4” and double-click the string.

Now it’s time to put the IP address directly on the computer. For example, the DVR was assigned the IP “192.168.1.20”. You need to put the IP of the same series on the PC.

• Enter “192.168.1.21”.
• Ping the IP address of the DVR from a computer or laptop and see the answer.

How to view a recording on a computer and TV

Everything is ready! The DVR is now connected to the computer. To view the content, open Internet Explorer and enter the IP address of the DVR in the address bar. If necessary, enter the login and password from the DVR. After passing the verification, the file management window will open. To view the contents of the DVR via TV, you need to connect the device in one of the available ways – FireWire, USB, HDMI, S-Video, Audio / Video Out, etc. The method of viewing the DVR recordings on a PC depends on the type of cameras:

• Analog cameras are the widest choice. Provides excellent picture quality at an affordable price. A video input board and special software are required for full use.
• IP video cameras – modern functional systems for remote use of the DVR. Depending on the capabilities of a particular model, through the browser or remote control console, you can access image settings, control the rotation of the camera, turn on / off the backlight, etc.
• Web-cameras are the most primitive video surveillance systems. Connected via USB, characterized by low image quality. To control such a video surveillance system, you can use the original (from the camera manufacturers) or third-party software, which allows not only to adjust the picture, but also to set the sensitivity of the motion sensor or on / off schedule.

To work with the DVR, you can use one of the popular programs for watching broadcasts from cameras.

IP Camera Viewer

This is a free tool that allows you to watch online videos from IP or USB cameras. To use the program, click “Add Camera”, select its type (support for more than 2000 IP and webcams) and click “OK” to accept the default settings. Immediately after that, you will see a broadcast window that you can zoom in, move, or view in full screen.

benefits:

• Instructions are available.
• Can be used for observation.
• Can access any IP camera.
• Neat interface.

disadvantages:

• Primitive interface.
• You must edit and enter the IP address of the camera manually.
• You must also edit and enter the MJPEG camera path manually.
• You must restart the application after each edit.

IP Camera Viewer is an application developed by IPcamerastudio.com that allows you to view real-time video from different IP cameras. Before using the program, you must specify the IP address of the camera to which you want to connect. Once launched, a simple interface opens with two tabs: Video and Help. The Videos tab will be the main viewing screen, and the Help tab provides instructions on how to watch videos from a specific IP camera.

To enter the IP address, you need to open the folder where the IP Camera Viewer is installed, and then right-click the file “IPCamera.bat”. Select “Edit”, and when the window appears, change “96.10.1.168” to your IP address, and then enter “/mjpg/video.mjpg” – the path of the MJPEG camera. After making changes, run the program and you’re done. Now when you open IP Camera Viewer you can view the channel from a specific IP camera. On the Camera Control / Change Camera tab, you can adjust various settings, including video resolution, frame rate, microphone volume, brightness, contrast, and more. In IP Camera Viewer, you can add up to four cameras and then monitor and view them all at once. But it’s just a viewer – no motion sensor, recording or anything else.

Active Webcam

Active WebCam detects, monitors, and records video files from virtually any video source, including USB webcams, analog cameras connected to video capture cards, FireWire video streams, TV card output, and network IP cameras. The software can stream real-time audio and video to a web browser or other copy of Active WebCam. When the motion sensor is activated, you can turn on the alarm, send e-mail notifications, and record or broadcast video. The unpopular but still popular Dial-Up Connection option is supported. The utility allows you to edit clips, add text, manage different users and log in remotely. When you start the application, you need to select: Create new camera, Search for cameras, Open all video capture channels, Open conversation, Create web page and Instruction. The easiest way to set up an active webcam is to let the program automatically detect your webcams and other video devices. Each channel is displayed as a thumbnail in the preview pane.