If a few years ago printers were most often installed in offices, now almost every computer owner buys this printer to expand their capabilities.
Refill the cartridge for the HP DeskJet 1510 printer even for a beginner.
If you look at which printer you buy more often for home use, you can clearly say that the inkjet. This model of printer demonstrates sufficient printing speed, and is accompanied by a reasonable cost of cartridges. Despite this, most users want to save money on refilling the printer.
One effective way to save this is to refill the printer cartridges yourself. Of course, in this case, you do not have to resort to the services of masters in service centers, respectively, to bear such additional costs. If you are the owner of the HP Deskjet 1510 printer, we are ready to offer you instructions, which will make it clear to you what actions to take, in what sequence, to ensure quality refueling of your device.
Device refueling rules
Once your HP Deskjet 1510 runs out of ink, you will be faced with choosing what to do next to keep it running. Of course, if the printer does not print at all, you will have to choose between buying new cartridges and refilling existing ones. Of course, the purchase of new consumables every time can not be considered a rational decision, so users are trying to refuel those that are available.
ADVICE. It is recommended that you do not delay the refilling process, as prolonged storage of the HP Deskjet 1510 printer cartridges will cause the head to dry out. If this happens, you are unlikely to be able to get it back on its own. In this case, experts subject consumables to thorough rinsing, but even such methods sometimes can not “resurrect” the head, which is why you have to throw away the cartridge, and instead buy a new one.
Ink addition algorithm
So, if you decide to learn how to refill cartridges yourself, we recommend that you first develop the habit of checking the ink level systematically, so as not to miss the moment when it is best to refill consumables.
IMPORTANTLY. Refueling is already required when the ink level is low. The problem is that to ensure printing of the HP Deskjet 1510 or other inkjet printer, the ink ejection nozzles heat up strongly. At the time of release, the ink itself begins to cool the nozzles, which is why their combustion is excluded. If the ink is not enough, they will not be able to cool the nozzles, provoking their final failure. In this case, you will definitely have to accept the disposal of these consumables and the purchase of new ones.
Therefore, if your HP Deskjet 1510 is no longer printing or you notice that the ink level has dropped to a critical level, we recommend that you refill the cartridge using our algorithm. Turn on your printing device, open the top cover and remove the consumables, place it on a table, which must first, to avoid excessive contamination with dyes, you must cover with paper or film.
Take the cartridge in your hands, carefully remove the protective sticker, freeing the hole through which you will be able to enter the ink. Take a pre-prepared syringe, fill it with about 6 ml of ink. Please note that the syringe must be clean, as any trace of old paint, mixed with new ink, can provoke undesirable consequences, up to the failure of consumables.
Insert the syringe needle into the hole and ink very slowly. Haste is discarded because it is important that the adsorbent inside the cartridge has time to absorb ink. Otherwise, your haste may result in all the consumables being flooded with ink and failing to fill the HP Deskjet 1510 printer properly.
Remove the syringe from the cartridge, wipe the stains with wet wipes, replace the previously removed sticker by closing the refill hole. All you have to do is insert the consumable into the HP Deskjet 1510 printer, print the test page, and make sure it prints well.
If you still do not like something, especially how your device prints, we recommend that you perform an ink pumping procedure, as in most cases this happens when the nozzles are clogged.
If you do not print a printer that performs color printing, you must refill such a special cartridge. The principle of operation remains exactly the same. The only feature is that under the sticker you will find several refill holes. Of course, you should not rush, but without haste to understand in which holes you need to pour ink of a certain color.
In rare cases, you may have refilled the cartridges, but your printer still does not print, accompanying your failure with an error message. The fact is that the manufacturer is extremely profitable for the consumer to purchase consumables as often as possible, so there comes a time when the cartridge is still able to function, but the computer recognizes it as unworthy, so it does not allow printing.
To prevent this unwanted error from occurring on your device, we recommend that you right-click the printer shortcut beforehand, and then go to the Properties option. In the window, select the “Port” tab, at the bottom there will be a proposal “Allow two-way data exchange”, by default, a check mark is selected next to this line in the checkbox.
Uncheck this box, then, unfortunately, you will no longer be able to view the ink level when printing, but the risk of such a fatal error will be eliminated.
So, having got acquainted with why there are problems after self-refueling of consumables, having studied algorithm of actions how to carry out introduction of ink, you will be able to carry out perfectly all these actions not only independently, but also qualitatively, without conceding on skill level even to experts of service centers. .
