If you have a PC, surely the dreaded “Unidentified Network” notice has ever appeared, but we tell you some tricks to solve this connectivity problem on your computer in Windows , since it is something that depends on many factors and we must fully evaluate the options to be able to have a network again.
The truth is that Windows is an operating system that can cause us certain problems, such as when it does not start , but network failures are perhaps the most common in this operating system and also the most uncomfortable since it does not always have a solution concrete and can alter our work routine, especially if we do it from home.
Network problems in Windows can come from a WiFi connection , to an Ethernet alike, because the truth is that in both ways we could have the error message of “Unidentified network”, however there are several alternatives to fix our Internet.
Fix: Clock bar icons are not visible in Windows 10
Troubleshoot Windows network problems
This is the most obvious and first step that we must take when we need to solve the problem of Unidentified Network in our computer, since this tool will be able to verify and repair the network that the operating system uses directly , since there is the possibility that it is a internal error in the computer and not coming from the network.
In general, Windows has the ability to fix itself in different cases and errors, which allows the operating system to automatically solve problems without having to go to technical service, this is one of those things that it can do on its own. only.
To get there we must follow the following steps:
- Go with the mouse cursor to the network icon located at the bottom right
- Press the right mouse button to display the menu
- Now just select the “Troubleshoot” option and follow the system instructions.
Diagnose the WiFi network
In this step we can access the option to solve WiFi problems , which will take us to the Windows network diagnostic center and its job will be to detect any problem that exists in the WiFi network itself of the computer and Windows will try to solve it directly.
- After it runs its troubleshooting process , you must choose the option “I have a different problem”
- Then you must choose the alternative “Use a specific network adapter”.
- Different options will appear and we choose WiFi , there we will allow the Troubleshooter to perform its diagnosis with that adapter.
- Upon completion, we should have a diagnosis of the failure and the system itself must proceed to solve it immediately, of course, if the problem is still at the operating system level.
Turn off Airplane mode
Although it may be obvious, it may not be so obvious. Some users may inadvertently have Airplane mode active on the computer and this causes no connection available, or that these problems such as the “Unidentified Network” are generated.
In Windows 10 specifically, it is one of the most common connectivity problems and you can solve it as easily as we explain it to you now:
- Display the networks menu in the lower right and locate the second bottom button that says “Airplane Mode”.
- If it is in blue, the function is active and we must click on it to deactivate it.
- You can also press the shortcut Windows + A and it will take you to the notification center , where you can locate the same button to deactivate Airplane mode.
Check the status of the connectors and the router
It is not absurd that this is another of the tricks to solve your connectivity problems, because sometimes the problem is simply a connection failure with the wrongly placed network cable and it may also be that your WiFi router simply needs to be restarted to restore its values network and give connectivity to your computer.
Network problems do not always come from our own computer, sometimes they are from the service provider that causes failures in our network , because it may have DNS problems or simply its service has a cut and is not managing data packets, although sometimes may give a false connection.
It is also important that you verify if your network cable is well connected to your computer and at the other end to the modem that gives you service, you could try removing and reconnecting so that it can synchronize correctly.
Disable Windows Defender Firewall temporarily
If you have already tested the operability of your router, cables and your WiFi network, then you can try this method to solve the problem of “Unidentified network” and it is to disable the Windows Defender firewall temporarily.
This tool fully complies with the protection of the computer from external threats, but on some occasions it can generate connection problems and cause this error that we have been talking about, preventing you from using the Internet.
To disable the Windows Defender Firewall we must follow the following steps:
- First press the Windows + I shortcut that will take you to Settings.
- Now we go to the Update and security option , then we enter Windows Security
- You must choose at this point Firewall and network protection .
- Now we choose the Public network option , in which we can deactivate the Windows Defender Firewall and check if the problem is already solved.
If you have an antivirus installed on your PC, you can try to execute this same procedure, that is, temporarily deactivate that option so that you can check if the browsing problem is caused by your security alternative.
Uninstall the antivirus
This is a solution that is linked to the above mentioned alternative. If you could verify that the problem you are presenting with the Internet network comes from your antivirus. Many of these third-party antivirus tend to generate connection problems due to their restrictions and the walls that they place between the network and the computer, leaving as a result that you simply cannot enter any website or the PC is totally disconnected.
The ideal thing in this case is that you uninstall the antivirus you are using , since its own restrictions will not allow you to navigate normally, for this go to the applications, find your antivirus in the list and uninstall it completely, you can try to replace it with Windows Defend that works quite well.
You must bear in mind that this procedure must be temporary, since your computer must be protected from threats at all times. If you use the Internet regularly and download files and content, you will be exposed to an attack and your PC must be prepared to face it, so a definitive solution cannot be to leave your computer unprotected.
Update network drivers in Windows
Let’s continue ruling out reasons why we can present the problem of Unidentified Network and one of the possibilities could have origin in the hardware, a compatibility problem with the driver may be responsible and it is something that has an easy solution.
The solution to this problem could be to simply update or reinstall the network driver in Windows:
- The first thing you should do is press the right mouse button on the start menu and find the Device Manager.
- A window will open and there we must then locate the network component, then you must right-click on the name of the hardware.
- Now we simply have to click on the option of the adapter to Update driver.
This can probably be one of the steps that you can execute at the beginning of your failure to connect , although we have placed it almost at the end, the truth is that it can be the early and quick solution to a problem that rests on your computer and nothing it has to see the network you are connected to.
Reset network protocols
We end this list of solutions with a slightly more complex procedure, but that may be responsible for the problem we are having, since a poorly configured TCP protocol, an incorrect IP and in general a conflict of this type can leave the PC completely disconnected. , even if your own network has no problem.
But the solution may lie in simply restoring your IP address settings , allowing the network on the computer to be restored and you can then surf the Internet.
The steps to run this solution are as follows:
- First of all we will use the Windows + X shortcut that will not allow us to open a command prompt window with administrator permissions.
- Now we must write the command “netsh winsock reset” and then execute “netsh int ip reset”.
- As soon as those commands have been executed, we must then enter “Ipconfig / flushdns” and then press Enter.
- Finally, you have to restart the PC so that you can verify that the Unidentified Network problem is resolved.
