Safe use of ammonia

Ammonia (NH3) is a basic chemical that is very useful in both agricultural and industrial sectors. For this reason, ammonia is widely used. But at the same time, ammonia can cause damage to life, property and the environment if the user is careless and may cause accidents in storage, use and transportation.

From the statistics of ammonia accidents which occurred both at home and abroad. Usually caused by industrial plants, cold storage, ice plant, ice cream factory Mainly due to equipment defect such as leaking valve, broken transport pipe or leaking gasket, etc., for example, accidents occurring in the country such as ammonia storage tank exploded at Ranong ice plant or leak from ammonia gas pipeline at In the cold storage in Trang and Chachoengsao, in the United States there have been several accidents from ammonia. Until the United States Environmental Protection Organization (EPA) has to establish the Accidental Release Information Program (ARIP) standard.

For Thailand, there are many uses of industrial ammonia. Therefore, providing accurate knowledge to both entrepreneurs and the general public Including preparation in handling accidents that may occur. This is another way to reduce the severity and risk of accidents. In this article, we give basic information on various aspects of ammonia such as physical properties. Production process Utilization Risk and danger Including guidelines for when leaks occur Safe storage and transportation

 

Chemical and physical properties

Ammonia is a naturally occurring gas and is part of the nitrogen cycle at normal temperature and pressure. Ammonia is a gas. Does not have a strong strong odor which can cause irritation. But if under pressure and cold temperature Will have a liquid state Ammonia has a molecular weight of 17.03, its specific gravity at 25 ° Celsius is 0.7 (Merck, 1996), boiling point -33.4 ° C, and a vapor pressure of 6,460 mm Hg at 20 ° C. Ammonia gas is highly soluble in water. It is ignited at a temperature of 648.89 degrees Celsius.

Ammonia is stable at normal temperature. But it decomposes to nitrogen and hydrogen at high temperatures to normal atmospheric pressure. The decomposition begins at 450-500 ° C. Ammonia slag is a source of nitrogen and bile hydrogen.

 

 

Ammonia benefits Ammonia is a very useful chemical in both agricultural and industrial sectors.

In the agricultural sector , approximately 85% of the ammonia is used to produce fertilizers. Especially used to produce ammonium nitrate and urea fertilizer.

Industrial sector

  • It is widely used as a refrigerant in the cold storage industry. Ice factory And freezer room
  • Ammonia reacts with cyclohexanone Got caprolactum (caprolactam), a raw material for making nylon fibers (nylon)
  • Ammonia is used as a substrate in the Nitric acid production industry.
  • Used in the hardening and coating industry By disintegrating ammonia at temperatures around 400-500 degrees Celsius to allow nitrogen to enter the metal molecules. This makes the metal more solid and slippery. Suitable for use in making various mechanical parts.
  • Used in concentrate latex industry, ammonia prevents the solidification of the latex and inhibits the growth of some bacteria.
  • Used in the electronics industry and in the surface of the screen.
  • Ammonia is also used as a raw material for making explosives such as Tri Nitrotoluene (TNT), Nitro Cellulose Nitroglycerin and Ammonium nitrate.

Guidelines for storing ammonia

Ammonia containers should be duly certified by the responsible agency such as the Public Works Department, the Department of Industrial Works. There are both container without cooling system and type with cooling system. Both types must have a mark with a plate on the outside that is clearly visible and the container capacity must be specified. Suitable pressure and temperature for storage It should also have the highest level of ammonia that can be contained.

In addition to the container The ammonia storage room has to be very thoughtful. The storage location must be clearly labeled. They should be situated away from crowded workplaces. And should have strict controls on the way in and out The storage room should be at a cool temperature. Adequate ventilation The walls of the room should be constructed of fire-resistant material. There is an entrance and exit for easy fire fighting. Physical effects and fire hazards should be considered, for example storage areas are free of flammable materials such as cardboard boxes, wood chips, etc. If the ammonia storage is a permanent installation Must be located away from a well or source of drinking water Water used at least 15 meters.

Ammonia Shipping Practices

Vehicles transporting ammonia must be internationally marked, indicating danger. And chemical dangers If using ammonia trucks, semi-trailers and trailers The trailer must be securely and securely attached to the towing vehicle. For ammonia containers loaded with trailers, pressure gauges, liquid level measuring devices, etc. are required. Additionally, the carrier should have ammonia handling manual in the event of an accident, chemical spill or fire. It also must have basic ammonia information such as physical and chemical properties. Correct fire extinguishing method Or first aid method As well as having a telephone number that can be contacted immediately with emergency services When there was an accident

Guidelines for leaks and fires

  1. When an ammonia leak or a fire occurs in an industrial factory, press the alarm signal. And then call to notify the relevant department of emergency such as the Emergency Response Team (ERT)
  2. Evacuate everyone from the leaked area and where ammonia is spread. By allowing everyone to gather to a safe place or to a trained gathering point If the victim is seen unconscious at the scene To help move to a safe and fresh air Gave first aid and immediately taken to the hospital
  3. In case of fire, use water spray. For cooling and extinguishing And immediately stop the ammonia leakage due to the good ammonia water droplets Therefore merging with water Helps to make ammonia gas not spread far In addition, if there is a spark or flame, dry chemical powder must be used. Or carbon dioxide To prevent further explosion or burning
  4. While stopping the leak, staff must wear personal protective equipment. To prevent direct contact with ammonia
  5. Clean up spilled ammonia. With the use of a lot of water Sprayed to absorb gas And reduces the transition from liquid to gaseous state. In this regard, care must be taken not to allow the ammonia dissolved water to flow into the river and canal. Or community sources because it will cause pollution to living things and the environment There must be a system to block the water contaminated with ammonia to flow together at the treatment system. Wastewater before being released into public water sources
  6. After successfully dealing with the leak There should be an investigation. In order to find a solution not to cause the incident next time In addition, ammonia content in air, surface water and groundwater should be examined to assess the residual content and carry out the removal or leaching process.

Guidelines for helping accident victims

  1. Move the ammonia victim from the scene to fresh air with the patient lying on the ground, breathing slowly, opening eyes as necessary. Use a thin, damp cloth to cover your mouth and nose during transport.
  2. Take off clothing contaminated with ammonia immediately. But in the case of frozen clothes on the skin Must be softened before removing. Wash your body with warm, clean water for at least 15 minutes.
  • When ammonia comes into contact with the eyes To immediately rinse with plenty of water By opening the water to flow through the eyes for at least 15 minutes and see a doctor quickly.
  • In the event of ammonia contact with the skin, wash it off with soapy water and water.If a large wound is caused due to cold, do not rub or pour water on the area, call your doctor immediately.
  • In case of breathing ammonia gas Should be moved quickly from the scene to a ventilated place. If the victim is weak breathing, oxygen can be used for 2 minutes but not more than 15 minutes, but if the heart stops beating, pump the heart immediately.
  • In case of ingestion of ammonia Rinse your mouth with plenty of water and drink a glass of water and induce vomiting using an expectorant or throat dropping method, except for the unconscious. To immediately deliver to the doctor
  1. The victim should be in a warm room. Or keep your body warm Which may use a blanket to cover
  2. Must provide equipment for Karathom to meet Yabal. Including personal protective equipment in an area where ammonia leakage must not be reached and must always be maintained for use.

Personal protective equipment

To work with ammonia, the following personal protective equipment must be provided: gloves, boots, booths, chemical-resistant suits made of butyl rubber and teflon materials. Ammonia protective goggles or eye shield (air purify) For use with ammonia gas (green stripe) half face for concentrations up to 500 ppm, full face for concentrations up to 2,500 ppm if exceeded. In case of an emergency, use a SCBA type respirator.

 

Leave a Comment

Scroll to Top