Its full name is Samsung IR Extender Cable, but people usually call it IR Extender. Thus, it allows you to bridge the gap between your Smart Touch Remote and also your cable box or between other AV devices.
Also, what makes the IR Extender cable so special is that it allows you to inspect your cable box with the Smart Touch Remote before synchronizing , instead of using the remote cable.
How to use IR extender cable on SAMSUNG TV? – Configuration guide
Index( )
- What are the benefits of using the IR extension for displays?
- Compatibility with most devices
- Good quality
- What are the disadvantages of using IR extensions on Samsung TV?
- low reach
- You need complete freedom
- What is the correct way to set up a TV to use IR extension?
- Physically configure the device
- Enter the settings of the device to connect
What are the benefits of using the IR extension for displays?
Compatibility with most devices
However, the great benefit of using the Smart Touch Control is that you have the opportunity to use it with various devices, including your set-top box, Blu-ray CD players and burning software, and many more devices.
Good quality
Another advantage over the IR extender is that it works with an IR sensor . This means that the IR signal will always reach the correct external device. On the other hand, the IR extender cable can work with devices that cannot be seen, such as devices that may be stored in your cabinet.
What are the disadvantages of using IR extensions on Samsung TV?
low reach
The IR extender cable literally needs to be close to the remote for it to work. All external devices must be connected to the Samsung TV at the same time.
You need complete freedom
In this case, there is another disadvantage, and that is that the IR Extender is not good at avoiding obstacles. That is, you should avoid having to put an obstacle between the IR Extender’s sensor and your receiver.
What is the correct way to set up a TV to use IR extension?
There are 3 different parts of an IR extender cable: the IR emitter, the IR receiver, and the USB power extension that can also be plugged into a wall outlet with a DC5V adapter . You may find that there is a sticky tape on the part of the IR emitter and IR receiver, but this is for sticking them to other devices.
Physically configure the device
Tear off the tape from the IR emitter and place it on the IR sensor of your set-top box. Peel off the tape from the IR receiver again and fix it in the line of sight of your remote control . As previously explained, make sure there are no obstacles between your remote control and the IR receiver .
Also note that some TVs and set-top boxes come with IR ports on the back, so some IR extenders have a connector instead of tape. Despite this, those with an adhesive tape tend to work better because you can put the transmitter and receiver where you want.
Enter the settings of the device to connect
As soon as you’ve done the physical setup, turn on your Samsung TV, it’s similar to when you control your TV with Alexa and press the Menu button on your remote. This will start Universal Remote Setup. While in this window, navigate to the System option and press the Enter button.
At this point, choose Device Manager and then press Enter again. Get the Universal Remote Settings entry here and press Enter to start.
Then turn on the device you want to connect the remote to. Choose Start using the Smart Touch Remote and confirm by pressing Enter. Locate the emitter on the device and press OK.
Then choose the type of device you want to connect to and confirm. In the case of finding your service provider, write their name in the corresponding box that says Find your service provider. In that situation, a list of available providers will pop up on the screen. Choose the one you want and press Enter.
To connect the decoder, you will need to select a TV port so that it can connect. After pressing Enter to set up the decoder, press the Channel Up/Down buttons on the Smart Touch Control to see if it works.
If your Samsung TV recognizes these commands, it means that you have successfully set up the IR extender cable and your Smart Touch Control. Therefore, in the Decoder Control Test menu that comes out, choose Yes to confirm.
In keeping with everything seen above, the IR Extender cable approves you to use the Smart Touch Control remote, which means it makes it easier to control your Samsung TV from the sofa. This technology is affordable and is an amazing and brilliant resource for all the peripheral devices you can connect to a Samsung TV and make sure it’s up to date .
