How to install an SSD storage drive in a computer

Many users want to increase the performance of our PC in one way or another and to achieve this we must increase the characteristics of our Hardware, it is also important to note that through the Software, performance can be increased if a PC with Windows or Mac works. slow and we have to increase its speed.

There are also a large number of programs that help us with the operation of our PC either to eliminate junk files, duplicates, clean the cache or simply an antivirus, all this and much more.

It is very easy to understand that at the computer level, the more space the better the performance, since if we have saturated our hard disk our PC will become slow, so a practical solution is to change our hard disk for one of more capacity or add an external one.

SSD disks are a feasible solution since they have a large amount of space, you must verify if your laptop or computer supports an SSD disk to be able to think about adding it, otherwise we recommend you continue using the HDD hard disk.

So if your PC is suitable for an SSD disk you can investigate which is better for your PC if the HDD or the SSD this is very important since it will define or ensure our storage space, so if you want to install and configure an SSD disk here in discover how to do it we teach you.


  • How to install an SSD storage drive in a computer
  • How to set up an SSD storage drive on a PC
  • How to do a speed test on an SSD disk

How to install an SSD storage drive in a computer

To install an SSD in the computer you will need a “sata cable” you can see this type of cable in your CPU is connected from the motherboard to the “hard disk” normally they have a red color but they can also be black or blue are the most common colors .

If you have already done with the sata cable, proceed to connect it to the motherboard, its connection has an “L” -shaped guide, it only fits in the correct one, so you do not have to worry about the location, there are even several ports to which you can connect it.

Once connected, you proceed to place the other end to the SSD unit in the same way, and you will be able to see another plug in the SDD storage unit, you just have to grab this connector from the power source, which is the same as that of HDD hard drives.

Normally there are always several connectors of this type in the power supplies since they can also be used in a DVD drive or external drives as in this particular case, when connecting the two ports the physical part of our SSD unit will be installed.

How to set up an SSD storage drive on a PC

After physically installing it, you proceed to turn on your PC and wait for it to automatically recognize it if not, just go to the start button and right-click to show the options, then select “Disk Management”.

An interface will open with all the available disks of the system and their partitions, but the important thing is, at the bottom, a storage space will appear with a message informing that it is not assigned.

You just press right click only this space and you give “new simple volume”, immediately the installation wizard will open, you just press next without moving its values, except to give it a letter as a name, then our system will only format it to Being able to use it and voila this SSD configuration in Windows is very easy to learn.

How to do a speed test on an SSD disk

To measure the writing speed or the sequential speed you must use a program that takes care of this function in this article we will recommend you:

CrystalDisk Mark: This magnificent tool allows us to see the sequential reading and writing speed of our SSD storage disk in different ways, it is very easy to use when you download the program, install it and when you run it, it takes care of the data sampling process of the selected discs. Successes!


by Abdullah Sam
I’m a teacher, researcher and writer. I write about study subjects to improve the learning of college and university students. I write top Quality study notes Mostly, Tech, Games, Education, And Solutions/Tips and Tricks. I am a person who helps students to acquire knowledge, competence or virtue.

Leave a Comment