How to install a built-in dishwasher

How to install a built-in dishwasher : step-by-step instructions for  installing a built-in dishwasher . The instructions are universal and useful for any model of dishwasher to be built-in under the kitchen. Illustrated guide and video tutorial.

The dishwasher is a very useful household appliance: with the new energy classes it allows you to wash dishes while saving water and time. To install the dishwasher  you can act in full autonomy both on the hydraulic and mechanical level. Of course, for the installation the water supply system must already be set up, while the drain must be connected to that of the sink with the appropriate connection.

Assembling  the dishwasher  is simple but it is best to proceed with caution and respecting all the good rules that we will see.

How to install a built-in dishwasher

First, remove the dishwasher from the box. You will notice that it is on the floor without any “feet”. Know that the “dishwasher feet” are there but you have to adjust them yourself.

Before removing the feet, insert the dishwasher into its recess .

Investigate the lower and front part of the dishwasher, locate the two feet and turn them with your hands until they are completely removed. In the central area there should be a screw. With a manual or electric screwdriver (to be used at very low intensity) turn until the third foot also appears, bringing the dishwasher level.

Without its feet, in fact, the dishwasher is several centimetres lower than the worktop and its built-in niche.

The most delicate part is the fixing. The dishwasher will come with some screws. Before using the ones provided, however, make sure they are compatible with your worktop (thickness, material, resistance, etc.). If the screws are suitable, proceed with the fixing or buy more suitable screws.

The screws are used to secure the top of the dishwasher to the top of your countertop. This is the only real anchor to the countertop, so it is important to screw them in all the way.

All dishwashers, in addition to the  top-top fixing , have a lateral fixing but we will deal with this at the end. The fixing points of the dishwasher are generally indicated in the product manual.

After fixing the dishwasher, you will need to move on to installing the trim panel. The trim panel must be fixed to the dishwasher door. The panel will be delivered to you by the furniture maker, to whom you will have given the product code.

In fact, each cabinet maker carves the panel based on the type of dishwasher it will fit. Built-in dishwashers have special concavities on the opening panel for anchoring the covering.

All you need to do is fix four screws to the panel that the furniture maker provided you and insert it (interlocking) onto the dishwasher door.

The operation will be simpler than expected: installing a built-in dishwasher is truly within everyone’s reach!

After inserting the snap-fit ​​panel, it must be secured with 4 additional screws, two on each side. Some models have three screws on each side.

Only when you have completely finished  assembling the dishwasher , you can check that the feet are perfectly level.

At this point you can proceed with the final fixing of the  dishwasher by screwing the screws on the sides. Usually there are two screws for each side, one in the central part of the dishwasher body and one on the upper part, near the corner.

The skirting will be added only at the end by inserting the stops at the feet of the kitchen. The dishwasher feet, in fact, are too narrow to accommodate the classic stops of the kitchen skirting.

To better understand  how to assemble a built-in dishwasher , we invite you to watch the  video  made by the Rex Milano Assistance center  . The model in the video is a Rex dishwasher but the same instructions apply to all  built-in dishwashers  (Candy, Electrolux, Samsung…

Leave a Comment

Scroll to Top