How to clean non-slip floors

With different models, finishes, materials, textures and dimensions, the non-slip floor is ideal for inclined, humid environments and / or with intense movement of people, as they are the places most likely to cause falls and slips. Thanks to its versatility, it combines with different spaces and is indicated both for outdoor areas – such as backyards, balconies and swimming pools – and for internal areas – stairs, kitchens and bathrooms, for example.

However, one thing little commented on is the difficulty in cleaning the non-slip floor. Cleaning of this floor needs to be done properly, since it is more likely to accumulate dirt, stain and stick to food and other waste.

Therefore, we separate here ways on how to keep this material clean and looking good in a practical way through basic care!

1. Daily care

Routine care ensures that dirt will not accumulate on the floor, preventing you from having to make a lot of effort when washing it.

Cleaning the non-slip floor is simple, just sweep the dirt in a circular motion – this helps to loosen the residues that get stuck between the irregularities of the floor – preferably using a hard nylon bristle broom.

Non-slip floors can be found in models of porcelain tiles, tiles, tiles and rubber. As they are irregular and reinforced, they offer greater security and are also very suitable for places where children and the elderly live. They usually have greater durability, when compared to ordinary floors, as they have greater resistance to more intense climatic conditions.

Therefore, frequent cleaning is extremely important, since it removes the most superficial dirt – such as dust, leaves and flowers – that can end up staining the material, especially if associated with humidity. This will not only ensure that the floor remains strong, but that it can be used in the long term.

Learn How to Clean Laminate Flooring

2. Material suitable for washing

The washing of the non-slip floor, above all, should be done once a week or every 15 days. Most of the time, warm water and neutral detergent will be enough to make the floor spotless. The water temperature helps to soften the dirt quickly and clean any traces of grease. So avoid using bleaches and stain removal products, these can end up damaging the floor material. Also, do not use waxes, as they can accumulate and remove the non-slip effect of the coating.

After sweeping the area in the correct way, mix water and neutral detergent in a bucket and throw them on the floor, allowing to act for about 5 minutes. You can also use specific products, such as a floor cleaner for your type of flooring. In case of any insistent odor, you can still use a multipurpose cleaner on the spot, it will solve the problem.

Then, with the floor still wet, take a hard-bristled broom and do the circular movements all over the area again, knowing that this helps to remove dirt more effectively. Then, use a high pressure hose or bucket of water to remove the soap. Remember to always avoid waste!

Finally, use a squeegee to remove excess water and a cloth to dry, if necessary.

3. Know when to hire professionals

Sometimes home cleaning alone is not enough. Some dirt is more difficult to remove, such as cement residues that may fall to the floor during the execution of a work or dirt and stains that have accumulated over a long period of time.

In such cases, it is best to hire a professional to perform the cleaning. Thus preventing possible damage to the floor due to products used improperly.

See also: Cleaning tips for those with children at home

4. Important information

However, if you are still just thinking about installing a non-slip floor, here are some important details that you should pay attention to to ensure greater durability of the material.

Regardless of the area where the non-slip floor will be applied, it is essential to observe the water absorption rate of your floor model, as it will directly influence the impact and resistance of the floor. Another essential tip is to evaluate the PEI index, which measures wear resistance (which can reduce the roughness of the floor) and is mentioned on the packaging. The classification ranges from PEI 0 to PEI 5, and the higher, the more resistant the floor.

  • PEI 0:use only in residential, commercial and industrial walls.
  • PEI 1:indicated for low local traffic, on indoor bathroom floors.
  • PEI 2:moderate traffic, for bathrooms and internal dorms.
  • PEI 3:medium traffic, for residential premises without external doors.
  • PEI 4:high traffic, for any residential area and small stores.
  • PEI 5:heavy traffic, in addition to previous uses, can be used in larger businesses and industries.

 

Did you see how cleaning non-slip floors can be simple if done frequently? We hope our tips have been helpful! If you have any questions or suggestions, leave a comment.

 

Leave a Comment