Efficient way to use a tactical flashlight

Today we will talk about the efficient way to use a tactical flashlight. In addition to the obvious benefit of lighting in low-visibility situations to locate and identify potential threats, flashlights also serve to communicate, navigate, and even momentarily confuse and blind the enemy in engagement.

The lanterns   can be incandescent or LED , sizes and weights variables and are generally classified by their brightness, measured in “lumens.”

Without going too far on the technical side, it is enough to know that it is considered necessary at least 60 lumens to temporarily blind a human being.

So most tactical flashlights have between 60 and 150 lumens and some reach up to 500 lumens attached to machine guns and larger and heavier vehicles.

Learn the efficient way to use a tactical flashlight

The source of emission and a factor to be taken into account, incandescent lamps have a filament that one day will have to be replaced.

Despite being quite resistant in tactical flashlights , the filament is subject to large shocks caused by the shot.

Incandescent lamps also use more energy.

LEDs are filament-free and use much less energy from their batteries.

Ergonomics is another very important factor to consider. In stressful situations, the movement to activate the flashlight should be natural and fluid.

The operator must practice activation thousands of times for it to become “muscle memory.”

And so there are no impulses that can accidentally reveal the position of the user and his team.

Nor should we forget that there is no point in spending hundreds of euros on a flashlight just to use it with low-quality batteries

So invest in the best possible batteries because your life may depend on them.

Finally, when it comes to basic tactics, contrary to what the operator thinks or sees on TV when he is inside a building, he doesn’t keep the flashlight on constantly for obvious reasons.

The correct thing is to turn the room on and off with a white light while continuing to move while walking in the building, for example.

In this way, search for, locate, and identify a threat while revealing your position as little as possible, and when that threat is found, use a strong white light to blind and confuse the enemy before neutralizing them.

For combat in a confined environment, there are strobe flashlights , which are nothing more than flashing repeatedly in no time. In flashlights over 60 lumens, this effect causes flashbang-like physical and mental confusion.

 

Leave a Comment