For various reasons it could be useful to know how to carry out a correct car towing , thus allowing the safe movement of a vehicle towards the mechanical workshop or a place of “rest”.
It being understood that the best thing to do is to call a tow truck that can carry out this operation for you in a fully safe way and in compliance with local laws, below we will see how to do this in the safest way, in non-dedicated areas. traffic or, in any case, once you have ensured that the equipment used is that according to law.
Car trailer with a tow truck
The first hypothesis for the car trailer is to use a towing trolley , which allows a vehicle to be towed, in turn allowing the towed vehicle to proceed with only the rear wheels, which are left resting on the ground while the vehicle is being towed. trailer, while the front ones are – in fact – integrated into the trolley. This procedure evidently works best when towing is a front-wheel drive vehicle, as rear-wheel drive, or four-wheel drive, requires you to disconnect the crankshaft while traveling long distances.
To do this, connect the trailer hitch to the towing hitch of the towing vehicle. Position it correctly, and tighten the tow bar until you are sure the connection is tight and secure. Check that the coupler is securely fastened by moving the tow vehicle slightly forward or pushing the cart to the rear. Therefore fix the safety chains from the trolley to the towing vehicle: in this way the trolley will remain connected to the towing vehicle even if the coupler were to detach from the tow hook ball.
Read also: Mobile phone in the car, all you need to know!
Next, move the towed vehicle onto the forward facing trolley ramp and make sure the full width of the towed vehicle is on the ramps. Secure the towed vehicle by continuing to drive onto the cart until both front tires are firmly locked. Using the tire straps on the cart, secure both front tires. Wrap the tow vehicle safety chains around an element of the tow vehicle frame. Finally, disconnect the driveshaft (on rear-wheel drive and four-wheel drive vehicles only).
Tow the car with the trailer
The other method is the simpler one, namely towing the car with a special trailer (we do not recommend the use of alternative systems, such as ropes, ropes, etc.). While it may be easier and safer than other methods, this towing method has its drawbacks, the main one being that the combination of the towed vehicle and trailer may be too heavy for the towing vehicle to be effectively handled. Precisely for this reason it is important to know the towing power of the towing vehicle, and to make sure that it is able to tow the weight of the vehicle and the trailer used for towing.
Having introduced this, its use is really very simple. First, the trailer must be securely attached to the towing vehicle hitch ball. Attach the safety chains from the trailer to the towing vehicle and connect the trailer harness to the following vehicle.
Using the supplied straps, place them over the center of the front tires and lower the strap until it is tight. Secure safety chains to the front and rear of the vehicle frame, being careful to avoid brake and fuel components.
We remind you that this operation must be carried out with the utmost awareness. Therefore, if you have doubts about the actual effectiveness of what you are doing, we advise you not to proceed further, suggesting instead that you resort to the advice of an expert company in car towing or contact your mechanic.