People today have many ways in which they can communicate with others. One of the most important ways in which we establish conversations is on the internet, or in telecommunications services itself. Telephones work by making calls within a telephone network. However, many times we want to get out of this and just be connected to WiFi.
If your phone gives you problems when connecting with the Wifi, and does not let you have a stable connection for a long time, it is important that you read this article, because we will give you several solutions and we will focus on when the phone loses connection when You close the screen or put it in Lock mode.
What is Wifi? How does this affect my cell phone?
Wifi is a wireless way by which the internet can be distributed. This is of great importance because as you may know, not all devices can be connected to the wall constantly, which is evidenced more than anything in our phones. Previously, all internet matters were worked strictly through wired communication systems . If you don’t know how, here we can teach you how to connect, disconnect or remove a Wi-Fi network from your mobile.
However, with the passage of time, the Ruters, or Routers, were created. These devices are designed to take the signal from this internet cable and distribute it wirelessly through the use of electromagnetic waves and rays, which allow the distribution of information at the speed of light.
This type of signal does not adversely affect your cell phone. In fact, all telephone systems work under this same concept of wireless service, only that unlike being a small router, they are giant antennas that can give signal for entire cities and not just for the living room of a house. Still, there are methods by which people learn how to boost the Wi-Fi signal of an Android phone.
Why does my cell phone or phone disconnect from my Wifi when I lock it?
This is due to a large number of problems, which can range from internal device problems, to problems with the router or with the very way in which the ISP sends information to your Modem. In this part, we will see the possible causes of the problem.
One of the main ones is that your router may be having IP address resolution conflicts. This may be because your phone may have the same IP address as another item in your house, so the device has a conflict over which device to connect to. In order to avoid this problem and the previous one, it is important that you learn how to configure a Wi-Fi network.
Another way in which this problem can occur is the oversaturation of the router connections. If you try to use a university router, for example, you will find that the connection is unstable and tends to drop. This is because there may be many people connected to the device at the same time, and therefore, traffic becomes congested. If you want to avoid traffic congestion, you must get the knowledge on how to improve internet speed to the maximum.
Lastly, and as the most common and therefore most important, there is a problem caused by one of the phone’s battery settings. You see, many devices automatically disconnect in order to save battery life.
What can I do to solve this problem?
First of all, the other two problems can only be solved by following the tutorials that we leave you above. Usually, fixing these problems always requires accessing the router’s configuration . However, if you want to deactivate the saving mode, we are going to show you how.
First of all, you must lower the notification bar and access the equipment options. In this menu you can see the wireless networks option. Access this menu, and where the Wi-Fi networks come out, you will see a button on the right that says ¨Advanced¨. Hit this. Then you will be taken to another section in which there are several options, among which is “Keep Wifi On During Sleep”. You must make sure that it is activated, so that your phone stops disconnecting without you asking.
