Somatic embryogenesis propagation in bananas and bananas . Somatic embryogenesis constitutes an interesting proposal for the massive propagation of plants from the hybrid cultivar FHIA-21 (Musa AAAB). However, it is characterized by being an asynchronous process, given by the presence of somatic embryos at different stages of ontogenetic development.
Summary
[ hide ]
- 1 Fundamental objective
- 2 Materials and Methods
- 1 Morphology and Histology of Somatic Embryos
- 2 ALTERNATIVE TO SEED DEFICIENCY
- 3 References
Fundamental objective
Somatic embryos can be obtained from many different parts of the plant, so we can use as explants: root and stem apices, hypocotyle, petioles, peduncles, young leaves and in general tissues and organs with embryonic, meristematic or reproductive characteristics (embryos and immature inflorescences , pieces of skullcap, nucelus and endosperm, ovules , ovarian tissue ). There are two types of in vitro somatic embryogenesis: direct and indirect. The direct form implies the existence of cellssomatic predetermined to follow the embryogenic pathway and the cells of the primary explant develop to form embryos (eg citrus nucella). The indirect form implies the need for induction so that the cells follow the embryogenic pathway, after passing through a proliferative phase ( callus) and change its competence to the expression of embryogenesis Reduction of the synchrony is an important aspect for the use of this regeneration system in plant propagation. This investigation was carried out with the objective of determining the effect of the inoculation density on the formation and homogeneous morphological development of the somatic embryos of cv. FHIA-21. For this purpose 0.5 were added; 1.0; 1.5 and 2.0 g of fresh mass (gMF) of embryogenic cell aggregates in Erlenmeyers (250 ml), containing 30 ml of liquid culture medium. The evaluations were made at 30 days of culture with the determination of the number and length of the somatic embryos (mm). In addition to a morphological and histological description of these. Results showed the regulatory effect of inoculation density on morphological formation and development. The banana cultivar FHIA-21 (AAAB) was introduced intoCubafor its resistance to black Sigatoka disease and for presenting adequate agronomic and organoleptic characteristics (Orellana et al., 1999). Its in vitro propagation has been carried out from the cultivation of meristematic apexes, that is, by the organogenic route of regeneration. However, the low multiplication coefficient and the growth of rosette-shaped shoots (García et al., 2002) limited their spread. The use of somatic embryogenesis could solve this problem due to the unlimited potential for secondary or recurrent multiplication of somatic embryos (ES). Its main disadvantage lies in the synchrony of the process, given the presence of ES at different stages of ontogenetic development. The synchronization of the process would avoid the selection operations of the ES with suitable characteristics for their subsequent multiplication, maturation, gemination and conversion of the plants under ex vitro conditions (Tonon et al., 2001; Barry-Etienne et al., 2002; Celestino et al., 2005). In the cv. FHIA-21 (AAAB), Daniels et al. (2002) developed a genetic transformation protocol using somatic embryogenesis as a plant regeneration system. These results laid the foundations for the formation, maturation and germination of ES in semi-solid culture medium. However, the use of liquid culture media increases the efficiency of the process due to its additional benefits, such as the reduction of costs due to the absence of the gelling agent and the possibility of automation (Gómez-Kosky et al., 2002; Ducos et al., 2007). Taking into account the aspects previously described, this work aimed to determine the effect of inoculation density on the formation and morphological variability of ES of cv. FHIA-21 in liquid culture medium, for subsequent use in mass propagation.
Materials and methods
Vegetal material. Somatic embryos were obtained in liquid culture medium, from embryogenic cell suspensions of plantain cv. ?? FHIA-21 ?? (AAAB), following the procedure described by other authors (10). A culture medium composed of 100% of the inorganic salts of Schenk and Hildebrandt (11) was used, to which were added 100% vitamins of Murashige and Skoog (12), 0.5 mg L-1 of biotin, 100 mg L-1 malt extract, 100 mg L-1 L-glutamine, 230 mg L-1 L-proline, 10 mg L-1 lactose, 0.05 mg L-1 zeatin, 100 mg L -1 of myo-inositol, 0.2 mg L-1 of naphthalenacetic acid (ANA), 0.2 mg L-1 of isopenylaminopurine (2ip), 0.1 mg L-1 of Kinetin and 45 g L-1 of saccharose. The pH was adjusted to 5.3 before sterilization.
Morphology and Histology of Somatic Embryos
A morphological description of the somatic embryos was carried out, with the aim of identifying their main characteristics, during the maturation phase. The observations were made under a stereoscopic microscope (OLYMPUS) (10x), as well as the measurement of its length (mm) through a micrometric scale attached to the eyepiece. To facilitate observation and measurement of the embryos, 1.0 mL of liquid culture medium containing the somatic embryos was removed from each treatment. Samples were placed in beakers (50 mL capacity) with 30 mL of a Gelrite® (SIGMA) solution (2.5 g L-1) and deionized water. Subsequently, the solutions in the beakers were poured into 70 mm diameter Petri dishes and the embryos were immobilized after the solution solidified. Measurement values were grouped into three length ranges, from 1.0 to 3.0; from 3.1 to 5.0 and from 5.1 to 7.0 mm, to determine their frequency of appearance in the different treatments and thus identify the inoculation density that provides greater synchrony to the culture.
Histological analysis was performed with the aim of identifying anatomical and biochemical structures that confirm the development of somatic embryos and their preparation for germination. For this, two samples were removed from each treatment and the somatic embryos were placed in a fixation solution that contained 37% formaldehyde (v / v), 100% acetic acid (v / v) and 70% ethanol (v / v), in a ratio of 5: 5: 90 for 24 hours. Subsequently, these were dehydrated in an ascending gradient of ethanol and embedded in paraffin. Serial slices 10 µm thick were made with a rotating microtome (Zeiss, Germany), fixed on slides, hydrated, and stained with 0.5% safranin.
ALTERNATIVE TO SEED DEFICIENCY
One of the most serious problems in Cuban agriculture is the deficit of quality seeds, free of pests and diseases and with high productive potentials. In this sense, the propagation of various varieties of banana and plantain via the somatic embryogenesis route, could constitute a viable alternative to solve the old problem, recognized Dr. Sergio Rodríguez, member of the Council of State and director of the Institute of Investigations in Tropical Routes (INIVIT), of Santo Domingo. With traditional methods, a new variety takes between eight and ten years to enter the field and with this technique the period is reduced to three years at most, thus reducing the cycle between a scientific result and its productive expression. In the development of seeds by biotechnological routes, IBP, INIVIT and several biopharmacies in the country work cooperatively, with priority for the viabanda plantain, whose seed was greatly affected by the Black Sigatoca, reason forcing a faster replacement, as they cannot have plantations for more than one year, because the child is born affected by the disease.
