Through this guide we will show you some possible solutions for the ‘DNS_PROBE_FINISHED_NXDOMAIN Error’ in Google Chrome , one of the most common browser errors.
Internet connection may be the reason for Google Chrome’s DNS_PROBE_FINISHED_NXDOMAIN error
On many occasions the DNS_PROBE_FINISHED_NXDOMAIN error appears when the internet connection fails . This can be checked very easily in the Windows task bar or at the top of your mobile.
It certainly seems like a simple thing, but sometimes we overlook it. Therefore, whenever the aforementioned error appears, check your internet connection.
If you verify that the error is precisely a connection failure, you should look for ways to solve the WiFi or Internet disconnection . In the same way, you can check if your data is over , in the case of using a mobile device.
Use Release and Renew command on Windows
The release and renew commands are often useful when there are connection problems. These commands are used using the Windows command console. In fact, they are not the only ones and it never hurts to know the best commands for networking in Windows .
- To use this method, you must open the Windows console, preferably as an administrator. For this, go to the Start Menu and in the search box locate CMD.
- Once the option appears, you must right click on it and select “Run as Administrator”.
- The console will open, where you will have to type “Ipconfig / release” and press the Enter key. Immediately after, type “Ipconfig / Renew” and press Enter again.
- After doing this, head over to Chrome and check if the DNS_PROBE_FINISHED_NXDOMAIN error is gone.
Restart the modem and router to remove the DNS_PROBE_FINISHED_NXDOMAIN error from Google Chrome
Another simple but often functional solution is to restart the modem / router . Sometimes the only way to fix the DNS_PROBE_FINISHED_NXDOMAIN error (which refers to a connectivity problem) is to power cycle both the modem and the router.
Restart DNS client to fix DNS_PROBE_FINISHED_NXDOMAIN failure
- To use this method, you will need to use the Run tool. You can enable it by pressing Windows + R .
- After the above, simply type ” services.msc ” and click on “OK”.
- After this, the Windows services menu appears. Here you should look for « DNS Client «.
- Just right click on this option and select ” Restart “.
- Finally, check if Google Chrome’s DNS_PROBE_FINISHED_NXDOMAIN error is gone.
Changing the TCP / IPv4 protocol DNS addresses can fix the DNS_PROBE_FINISHED_NXDOMAIN error
- To carry out this process you must go to the Control Panel, you can search for it directly from the Start Menu. Once you are inside the Panel, look for “Networks and Internet”.
- Here you will see “Network and Sharing Center”, click on that option.
- On the left side of the screen, locate the option “Change adapter settings” , click on it.
- The network adapters connected to your computer will be displayed. Simply right-click on the one that is active and select ” Properties . “
- Among the options that are displayed, look for the section “ Internet Protocol version 4 (TCP / IPv4) ”, simply double-click on that option.
- The TCP / IPv4 protocol options menu will be displayed, go to the bottom and select “Use the following DNS server addresses ”.
- You will need to manually provide the DNS server. Just write 8.8.8 in Preferred DNS Server, while in Alternate DNS Server, you should put 4.4.4.4 . After making the changes, simply click on ” Accept ” in the options menus.
After doing the previous configuration, test if the DNS_PROBE_FINISHED_NXDOMAIN error has been solved. If so, it is recommended that you look for a way to improve the speed of the WiFi and accelerate the internet , since many times people do not know how to take advantage of their connection.
