Plant propagation . Each type of plant requires its most suitable type of propagation from the most natural and known as it is through the seeds or by division of roots for example.
In general, perennial or shrub plants are usually propagated by cuttings and root division, and annual and bi-annual seeds. Let’s know the propagation methods of plants
Summary
[ hide ]
- 1 Propagation by seeds
- 2 Propagation by propagules
- 1 Forms of asexual propagation
- 2 Characteristics and uses of the elbow
- 3 Types of elbow
- 4 Importance
- 5 Advantages
- 6 Types of Stakes
- 3 Vegetative propagation structures
- 4 Vegetative propagation structures in non-vascular plants
- 5 Vegetative propagation structures in vascular plants
- 6 Vegetative propagation by stems and buds
- 1 Vegetative propagation by stems
- 2 Vegetative propagation by roots =
- 3 Vegetative propagation by leaves
- 7 Induced vegetative propagation
- 1 Rooting segments
- 2 Characteristics of the different types of cuts:
- 3 Steps and criteria to consider:
- 4 Choice and management of the donor plant
- 5 Recommendations for obtaining cuts from the donor plant:
- 6 Rooting and establishment
- 7 Graft
- 8 Clonal selection
- 9 Reasons to use asexual spread
- 10 The Clone
- 8 Sources
Propagation by seeds
Propagation by seed
Horticulturist can not talk about self – sufficiency without getting their own seeds of vegetables and vegetables . Of course it is not necessary that the first year we try to obtain the seeds of all the varieties, we can do it progressively by studying and learning about the particularities of each plant in the production and drying of its seeds.
Tomatoes, for example, leave a bush in order that they ripen well until they almost fall off the bush and then they are put open in a blotting paper or newspaper and allowed to dry well in order to extract the seeds from the pulp. dry.
The worst enemy of seeds when storing them is excessive humidity and light, so I recommend airtight and dark cans or dark paper bags. By means of seeds we can sow horticultural or medicinal plants either in pots and other containers or in directly prepared soil (direct sowing).
Propagule propagation
It is this is called asexual or artificial, the plant or part of the plant is used that placed in the soil in the correct way and under favorable conditions gives rise to a new plant, with the genetic characteristics equal to the plant that we extracted that we extracted the propoagulum.
Asexual forms of prognosis
By cuttings : It is a widely used method in horticulture to propagate many varieties, especially woody perennials such as lavender or sage for example. It is a method that consists of selecting a healthy and young plant that is cut just below a knot in a leaf or stem, preferably using a clean and well-sharpened blade.
Subsequently, the lower leaves are removed and buried under suitable compost, although some people first immerse them in a preparation of rooting hormones to guarantee their success. As a personal experience I can recommend planting cuttings of sage, chamomile, lavender, thyme …
By division of roots : It is made from a root ball. During the fall the herbaceous plants that bloom in spring are propagated and those that bloom in autumn are propagated in spring. For the division by roots a mother or mature plant is chosen and it is divided into smaller sections all of them with roots and they are replanted in prepared soil by pressing or treading the soil well against the roots and then watering. We can plant some plants like ginger from its roots or tubers.
By layering : It consists of making a shoot or stem take root by means of an incision in the lower part that is buried by later transplanting it into a pot or pot. This method is usually applied to woody plants such as sage for example.
Characteristics and uses of the elbow
The main advantage of the layering is the success with which the plants take root by this method. Many clones that do not easily root by stake can root by layering, allowing the plant to be established on its own roots. Most of the layering methods are relatively easy to carry out and can be practiced outdoors in the garden or nursery. When it comes to obtaining a small number of plants, layering can be more successful with less skill, effort, and equipment than would be required to obtain them by cuttings.
Types of elbow
- Pointed elbow
- Simple layered
- Compound or Serpentine Layered
- Air Layer (Chinese Layer, Pot Layer, Circuitry, Marcottage, Gootee)
- Layered in Mound or Bench
- Layered in Trench
Stem: It occurs in most bulbous plants such as garlic or onion. During the dormancy period they can be detached and replanted.
By cuttings : In cuttings by cuttings, a part of the stem, root or leaf is separated from the mother plant, is placed under favorable environmental conditions and is induced to form roots and stems, thus producing a new independent plant , which in most cases is identical to the plant from which it comes.
Importance
This is the most important method of propagating ornamental shrubs. Stakes are also widely used in commercial greenhouse propagation of many ornate flowering plants and are commonly used to propagate various species of fruit trees.
Advantage
- Many plants can be started in a limited space, starting from a few mother plants.
- It is inexpensive, fast and simple, not requiring the special techniques used for grafting.
- They do not have problems due to incompatibility between pattern and graft or due to poor graft unions.
- The parent plant often reproduces accurately without genetic variation.
Stake Types
Stakes are almost always made from the vegetative portions of the plant, such as modified stems (rhizomes, tubers, corms, and bulbs), leaves, or roots. Various types of cuttings can be made, which are classified according to the part of the plant from which they come:
- Stem stakes:
- Hardwood (Deciduous species)
- Evergreens with narrow leaves
- Medium hard wood
- Soft wood
-
- Leaf stakes
- Stakes with leaf and bud
- Root cuttings.
The diameter of the stakes varies between 1.5 and 2.5 or even 5 cm, depending on the species. Three types of stakes can be prepared:
- The type of “deck”
- The “heeled” guy
- The Simple Stake
Unlike in vertebrates, the seed is released when its tissues have not yet fully differentiated. The seed contains embryonic cells that will give rise to all the tissues of the new plant after the germination process; in addition, many of the cells of the already mature plant tissues retain the potential to differentiate and give rise to various structures; These cells are part of primary and secondary merithems that can be found in all plant organs. Thanks to this it is possible to obtain whole plants from the buds, stems , roots and even leaves of almost any plant.
The clonal or vegetative propagation of plants is a production from vegetative parts. Plant tissues that preserve the potential for cell multiplication and differentiation are used to generate new stems and roots from cell clusters present in various organs. This type of spread has essentially three variants, which are:
- Micropropagation from plant tissue in vitro culture.
- Propagation from bulbs, rhizomes, stolons, tubers or segments (cuttings) of plants that retain the potential to root.
- The propagation by grafting of plant segments on stems of more resistant receptive plants.
Vegetative propagation structures
Several vascular plant species, mostly cultivated species, do not produce seeds even if they have flowers , their multiplication or vegetative propagation does not imply the fusion of germ cells . This form of propagation also occurs in plants that normally produce seeds, and is only considered as asexual reproduction when it largely replaces sexual reproduction.
It is a process that involves rooting and separating a part of it. original plant when the plant tissues that the seeds united die. In this way, the detached cells, tissues or organs develop directly in new individuals. Abscission zones may be precise, as occurs in the separation of the bulbils, or fragmentation of a plant may occur due to the deterioration and death of the parent individual or of the interconnecting tissues, as in the case of outbreaks of estate.
Vegetative propagation structures also function as resistance and storage organs in adverse seasons, which are sometimes stored for prolonged periods.
Vegetative propagation structures in non-vascular plants
Vegetative propagation occurs throughout the plant kingdom; for example, in some multicellular algae, vegetative propagation is carried out by fragmentation in two or more individuals. Cyanobacteria have thick, large-walled, dead cells along their filaments, found at intervals along their filaments, which aid in fragmentation.
Various types of non-vascular plants have specialized structures related to vegetative propagation. The liverworts produce structures similar to the buds called propagules, which when detached from their pedicel are carried by the rain to places where they develop as new plants, while lichens produce reproductive bodies known as herds, composed of masses of fungal hyphae and of algal cells.
Vegetative propagation structures in vascular plants
By virtue of the totipotentiality of plant tissue, that is, its ability to form adventitious buds and roots, almost any of the organs of a vascular plant is related to its vegetative propagation by undergoing anatomical and functional modifications that allow it to develop in an organism. complete and independent plant, with the same genetic characteristics of the parent plant. The buds are generally found in the axils of the leaves, in the terminal portion of the stem, or they develop in any portion of the stem and give rise to adventitious roots.
Among the vegetative propagation structures some share similarities in their development, so it is not always possible to make a very clear differentiation between them, but rather they are located in a continuum of characteristics. However, some authors classify them taking into account the plant organs from which they originate. Based on this criterion we will describe some of the most common.
Vegetative propagation by stems and buds
The aerial and underground horizontal stems of various wild and cultivated species lengthen and form adventitious roots at their nodes. As long as the tissues remain intact it is about the growth of a single plant, as it happens in many grass species. This full-grown, full-grown individual is known as a genet or clone. But when the interconnecting tissue dies or is cut, each of the segments gives rise to a new individual who is known as ramet. A) Separation of the individual ramets due to death of the interconnection fabric; B) stolons; C) rhizome; D) the tuber (potato) is cut into pieces and each one contains a bud so that more plants can propagate from the tubers.
Vegetative propagation by stems
- They consist of relatively long and thin sections of horizontal aerial stems with alternating long and short internodes that generate adventitious roots. The separation of these rooted segments allows the development of daughter plants. Strawberry is an example of the species that commonly present this type of spread.
- They are generated from the horizontal growth of an underground stem, generally more robust than that which gives rise to a stolon. The old portions are degraded and separated into fragments that will have to take root independently. This underground stem has scaly leaves in the armpits, where axillary buds can be generated, in addition to presenting adventitious roots. Once the main stem is formed, continuous growth occurs. Each growing season shows sypodial growth through the axillary bud or monopodial growth through the terminal bud. The rhizome works as a reserve storage organ. In this way, species of economic importance are spread, such as bamboo, sugar cane, banana, as well as some grasses.
- They are thick, succulent structures, which also act as reserve structures. They form at the end of thin underground stems. A well-known example is the potato. The tubers have knots with scaly leaves on their surface, arranged in a spiral way, and each one consists of one or more small buds. When the growth of the main stem begins, the adventitious roots develop at the base of the tuber and the horizontal buds lengthen and produce etiolated stems in the form of stolons. New tubers are formed from the tubers that have formed horizontal branches.The tubers and rhizomes are very similar and in some cases it is almost impossible to distinguish them. However, a distinctive feature of a true rhizome is that it has a uniform thickness throughout its length, on which adventitious roots grow, which do not exist in the knots of the tubers. Another difference between these structures is that the rhizome will form the main stem of the new plant, while the tuber forms lateral branches.
- Outbreaks They are defined as branches or stems that develop adventitious roots without being independent of the parent plant. They develop in the axils of scaly leaves or adventitious buds on the roots. In edible pineapple the shoots develop in the axils of the lower leaves that are covered by the ground.
- They form in the buds of the armpits of the leaves of a robust and succulent stem that provides the necessary nutrients for the new structure, which will detach from the parent and develop underground as a short, erect and solid stem with knots and internodes. The corms are shaped like spheres flattened dorsoventrally, like those of the gladiolus and saffron. They are wrapped in thin, scaly leaves that protect them from physical damage and water loss, but do not function as storage structures, unlike bulb scales. When the scales come off they mark circles around the corm. It develops ventral or basal adventitious roots. The apex of the corm is a terminal stem that will develop on the leaves and on a floral stem terminated by an inflorescence, and in each one of the nodes the axillary buds are produced (figure 15B). The corm multiplies by branching sympathetically, and if a corm is cut, keeping one bud in each section, each of these segments will develop a new corm.
- Small structures similar to the stolons known as cormels are produced on the lower end of the corm (Figure 15C). The death of the parental corm will allow the separation of the child corms, which can be stored during the winter and planted during the favorable season for growth.
- They develop on short and thickened stems, from axillary buds of fleshy leaves. From these they obtain reserve elements, unlike corms that obtain them from the stem, which allows them to quickly produce adventitious roots. They develop underground in the form of fleshy stems, covered with thickened, scale-like leaves that function as reserve organs. More than one bulb may be produced from each bud. In some cases, masses of bulbs develop at the end of the stem, each called bulbs, which can be dispersed away from the parent bulb. In the center of the bulbs there is a vegetative meristem or a flower stem.
Vegetative propagation by roots =
An extensive form of plant propagation occurs through numerous shoots growing from its horizontal roots. Such shoots are formed only if the root is damaged, then the shoots are differentiated into a callus tissue. The fleshy and agglomerated roots of sweet potatoes, dahlias and peonies are also a means of vegetative propagation.
Vegetative propagation by leaves
This type of spread is not as prevalent in nature as the previous two. However, it is possible to find it in the leaves of some ferns, which form a kind of kink when in contact with the ground; in other species, among which are the African violets, new individuals are formed from the leaves that detach and fall to the ground and that later develop adventitious roots.
Induced vegetative propagation
As we have seen, the potential of plants to generate new individuals from segments of their organism is widely distributed in plants in many environments. For many species asexual reproduction predominates over sexual, and the conditions of their environment make it very unlikely that the seed will generate a plant capable of establishing itself due to the limitations of fundamental resources such as water, light or competition with established plants.
A well-known case in our country is that of cacti and other plants in arid zones that present many of the aforementioned reproductive structures. For example, nopales reproduce easily naturally from stem segments, which have a very peculiar shape and are known as pencas, and in botanical terms as cladodes. These come off spontaneously or as a result of a traumatic event and take root naturally, which is in many cases the main mechanism of reproduction of these plants.
Rooting segments
This propagation technique has many advantages and is used successfully without the need for a large financial investment. The most common technique is the induction of root formation in a section of the stem or branch, so that an independent plant originates. Where propagation of trees by rooting from segments has been experienced, more than 80 percent have been successful.
Depending on the part of the plant from which the segments are obtained (cuts or fragments), it has been divided into sections: leaves, shoots or shoots, roots and branches. The selection of any of them basically depends on the inherent characteristics of each species, on the facilities to obtain and manipulate the cuts (depending on the phenological state of the plant), the purpose of propagation and the availability of economic resources.
Characteristics of the different types of cuts:
- Leaf cuts. Some herbaceous species, such as African violets and peperomias, produce roots from their leaves and later stems; however, this does not happen easily in most trees. Cuts that include an axillary bud and a branch fragment in addition to the leaf are suitable for propagating some plants – such as camellias and rhododendrons, which are woody species – and are also used to propagate trees when the amount of other types available is available. segments is scarce.
- Root cuts. The ability of many trees to produce branches from their roots (under proper growing conditions) is used to propagate some plants, such as bananas and guavas.
- Branch cuts. Vegetative propagation through branch or shoot segments is one of the most used methods to propagate woody plants in the nursery. According to the maturity characteristics of the wood from which the branches or shoots are obtained, the cuts have been divided into cuts: hard, semi-hard and soft wood. Although the different stages of ripening are continuous, they are generally distinguished by the shape and color of the leaves and by changes in the color of the stem or branches. Tree propagation techniques by cutting branches are divided into two basic types: foliated segments and defoliated segments.
Each of these uses wood cuttings with a different degree of maturation, and since they come from trees of contrasting phenological cycle, this difference is related to the accumulation of reserves in the stem tissues.
In deciduous trees, from which the defoliated segments are obtained, before the leaves fall there is accumulation of reserves, which are destined to later form new leaves. From these reserves, the roots and leaves in the segment are generated; instead, the foliated segments usually come from evergreen trees, which do not accumulate reserves on the stem and must continue photosynthesizing to produce the resources necessary to generate new growth.
Steps and criteria to consider:
- Select vigorous and healthy donors with a high amount of food reserves, preferably from a bank of donor plants that have grown under conditions of complete lighting and therefore contain a high amount of food reserves.
- Choose the basal or central segments of the branch, which are the ones that have the most food reserves necessary for the development of new roots, since from them the secondary ramifications are derived. Therefore, branches with very long internodes or small and weak branches should not be chosen.
- The size of the segments varies between 15 and 75 cm in length, the appropriate criteria for choosing it depends on the species, since it is required that at least two knots be included, although the recommended is four to six, especially when the internodes are very short. The diameter of the branches in which the cuts are made can be 0.6 to 5 centimeters.
- The basal cut is made just below one knot (site where adventitious roots are preferably formed) and the upper cut is made 1.3 to 2.5 cm above the other knot. The cut can be mallet (includes a section of the older wood stem), heel or heel (the old wood portion is smaller) and straight (does not include old wood.
- Pack the stakes carefully with their orientation, to maintain their polarity and allow the sap flow to follow its normal direction. This is why the base is marked with a slanted cut or the base is bathed with wax, which also helps to avoid moisture loss, which could lead to poor rooting.
- The rooting of defoliated segments occurs easily, since the phenological cycle itself coincides the production of growth hormones with the period of rooting and growth of buds of the segment. Still, rooting is greatly favored if hormones and some procedures are employed to ensure rapid segment development. The most commonly used substances to accelerate rooting are naphthalenacetic acid (ANA) and indolebutyric acid (AIB), which will be discussed later. Rooting is also favored by placing the segments at low temperature (5-8 ° C) for a few weeks, as this stimulates the synthesis of hormones in plants that come from climates in which there is a cold season.
Choice and management of the donor plant
Donor plants should be vigorous, healthy, and well-managed to ensure continued and prolonged production of large numbers of easy-rooting cuttings. Sprouts from the same donor plant can be harvested every two or three months, but it is not recommended to make very frequent harvests, since this would affect the food reserves of the plant, its root system and soil fertility.
The donor plant must be fertilized regularly and maintain at least one branch with leaves that can continue photosynthesizing and thus serve as a feeder bud for the donor plant. It should also be kept in the shade, at least for a few weeks, which will favor the future rooting of the cuttings, since in this situation the plant does not suffer from water stress.
Recommendations for obtaining cuts from the donor plant:
- Obtaining branches of the donor plant should be done in the morning or in the afternoon (before 10 am or after 4 pm), in order to avoid water loss during the hours of greatest sunshine.
- It is convenient that the pruning of the chosen branches (with vertical growth) is carried out at the height of 10 knots or less, as in the case of shoots obtained from stumps. When it is difficult to distinguish the number of knots, it is advisable to take as a criterion a height of the shoot or branch, from 10 cm to 1 m, to ensure greater rooting capacity.
- The leaves of the branches where the cuts will be obtained must be between 8 and 10 cm long, otherwise the leaf area must be reduced, since very large leaves favor the loss of water and very small leaves do not produce enough carbohydrates or other substances necessary for the cut to survive. The leaf area can be reduced by cutting the leaves with scissors and taking care that the tissue is not damaged by crushing or crushing.
- Once the shoots have been cut, they are marked with the number of the donor plant (clone number), they are placed as quickly as possible in plastic bags with some material that retains enough water and they are closed to avoid moisture loss. They should be kept in a cool and shady place and as far as possible move to the rooting area of the nursery.
- When extracting the shoots to make the cuts, they must be kept moist and fresh, exposing them as little as possible to the wind, since this increases the loss of humidity. The cuts should be made with sharp instruments, obliquely above the knot, or straight to prevent the root system from forming on one side. The optimal length of the stakes is usually between 3 and 10 cm. Regardless of the type of cut or size, they should always have at least one leaf at the tip of the stake, so that it provides nutrients and other substances necessary for rooting.
Rooting and establishment
The area where the rooting stakes will be placed should be cool and shady. The optimal temperature for this to occur is between 20 and 25 ° C. When temperatures rise above 30 ° C, the relative humidity of the atmosphere or water vapor content in the air will have to be very high (more than 90%) to prevent plants from losing too much water as their transpiration increases and they end up withering. Shade can be produced with materials of plant origin such as palm leaves, straw, dry branches, or with special plastic nets designed for that purpose. It is important that the material used transmits a light that is appropriate to activate the photosynthesis of the plants.
Graft
Grafting a plant
The grafting technique consists of taking a segment of a plant, usually woody, and inserting it into the stem or branch of another plant of the same species or of a very close species, in order to establish continuity in the flows of raw sap and processed sap, between the recipient stem and the graft.
In this way, the grafted stem forms a healing tissue together with the recipient stem and is perfectly integrated to it, being able to restart its growth and produce leaves, branches and even reproductive organs. This technique is very old and was already practiced by Chinese horticulturists since ancient times.
It has great advantages, especially for the cultivation of fruit and ornamental trees, since it allows the use of established plants that are resistant to unfavorable conditions and diseases as a grafting base, using them as graft recipients of more productive plants and with better quality fruits. and higher production.
Contrary to popular belief, grafting does not produce a combination of characteristics between the recipient and the grafted plant. The fruits of the grafted plant do not change their properties or taste, the only advantage is that the graft allows to use already developed bases, which accelerates the production of fruits.
The resistance (to diseases or unfavorable conditions) of lower quality fruit tree varieties is also used to graft higher quality but less resistant varieties into them. Grafting is a particular form of segmental asexual reproduction that is used on a large scale in fruit growing.
One of the industries that use this technique most frequently is viticulture or vine growing. Very often low-quality grape-producing plants, but highly resistant to drought and disease, are grafted with high-quality, high-production vine segments. This technique is widely used to improve the production of long-established old vineyards.
The grafting techniques are very varied and there is an optimal method for each purpose and type of plant. Essentially all procedures consist of having good receptacle plants available and good segments to graft.
The technique begins by making a cut in the recipient stem and another in the segment to be grafted, so that the vascular tissues of the graft make contact with their equivalents in the recipient plant. Once the graft is done, the wound is protected with a special wax and covered with cloth or string to prevent it from coming off.
The grafted tissue is generally defoliated and it is convenient for the graft to coincide with the spring season so that, when restarting the growth of the tissues, the hormonal stimuli that characterize that moment of the plant’s life induce the establishment of a connection appropriate between the tissues of both parties.
Clonal selection
Micropropagation and vegetative propagation allow the use of selection techniques and improvement of the favorable characteristics of plants through clonal selection. Features that can be improved cover a wide range of possibilities; for example, the resistance of plants to temperature, to drought, to growing in poor soils or with unfavorable characteristics, such as excessive acidity or alkalinity, high salinity or humidity saturation; The performance of forage and fruit, its flavor and nutritional quality, the speed of growth, the quality of the wood produced and the concentration of valuable secondary compounds such as chemicals, latex, gums, etc. can also be improved.
Below we briefly describe the two basic clonal selection techniques:
- Nature is searched for plants that present the desired characteristic in an optimal way (for example, the most delicious and large fruits), and the meristems or segments that are to be used for vegetative propagation are taken from that individual, in order to obtain many individuals with the desired characteristic.
- Seeds, segments or meristems are collected from many individuals from one or more populations of the species to be propagated. With this material many small plants are produced in a nursery and are subjected to the unfavorable conditions for which it is desired that they have greater resistance; You can also compare its growth rate, its forage production or any other quality that you want to highlight. The individuals that show the optimal characteristics according to the case are chosen and are used to propagate them vegetatively and thus obtain improved individuals.
Reasons to use asexual spread
Asexual spread reproduces clones. This propagation involves the authentic division of the cells, in which there is an integral duplication of the chromosomal system and the associated cytoplasm of the progenitor cell, to form two daughter cells. Consequently, vegetatively propagated plants reproduce, by means of DNA replication, all the genetic information of the parent plant.
Because of this, the specific characteristics of a given plant are perpetuated in the propagation of a clone. The asexual reproduction process has special importance in Horticulture because the genetic composition (genotype) of most fruit cultivars and the most valuable ornamental plants is generally heterozygous and the characteristics that distinguish these types are immediately lost when propagate them by seed.
Asexual propagation is essential in the reproduction of cultivars that do not produce viable seeds, such as some bananas, figs, orange trees, and vines.
In some species propagation is easier, faster and cheaper by vegetative means than by seeds. Cotoneaster seed has complex dormancy conditions but leaf cuttings take root quickly and in large proportions. Seedlings of some species grow more slowly than rooted cuttings.
Some plants grown from seed have a long juvenile period and during that time the plant can not only stop flowering and fructify, but also show other inconvenient morphological characteristics (eg, having thorns) that do not occur when propagation is done. with vegetative material in the adult state. On the other hand, it may be useful to maintain this juvenile state indefinitely to facilitate the propagation of hard to root cuttings.
The clone
Many fruit and ornamental cultivars are groups of vegetatively propagated plants, initiated by an individual plant, usually one that comes from a seed or part of a plant, such as from a bud mutation. That group of plants taken collectively has been given the name of clone.
A clone can be defined as “genetically uniform material derived from a single individual and propagated exclusively by vegetative means such as cuttings, splits, or grafts.” A discovery made in an individual member of a clone, such as a propagation method, a certain cultivation practice, a disease control method, or certain cross-pollination requirements apply in the same way to all members of that clone.
A clone is an organism or group of organisms that derive from another through a process of asexual (non-sexual) reproduction. The term has been applied to both cells and organisms, so a group of cells that come from a single cell is also considered a clone.
In general, the members of a clone have identical hereditary characteristics, that is, their genes are the same, with the exception of some differences due to mutations. For example, identical twins, which originate from the division of a single fertilized egg, are members of one clone, whereas non-identical twins that originate from the fertilization of two independent eggs are not.
In addition to prokaryotes (bacteria and bluish-green algae), other simple organisms such as most protozoa, other types of algae, and some yeasts, also reproduce by cloning, like certain higher organisms, in the case of flatworms and plants like dandelion.
Thanks to recent advances in genetic engineering, scientists can isolate an individual gene (or groups of genes) from one organism and implant it in another organism belonging to a different species. The species selected as recipients are generally those with asexual reproduction, such as bacteria or yeast.
Therefore, it is possible to generate a clone of organisms, or cells, that all contain the same foreign gene (or genes). Because bacteria, yeast, and other cell cultures can multiply at high speed, these methods make it possible to produce many copies of a given gene, allowing them to be isolated and used for research (such as for study of the chemical nature and structure of the gene), or for medical and commercial purposes (in order, for example, to obtain large amounts of useful substances such as insulin, interferon and growth hormone). This technique is called cloning because it uses clones of organisms or cells.
It has great medical and economic potential, and is the subject of intensive research. Identical twin animals can also be produced by cloning. An embryo in an early development phase is removed from the uterus and divided. Each part is then implanted separately into a surrogate uterus. Some mammals such as mice and sheep have been obtained in this way.
Another discovery has been the possibility of taking a nucleus with the complete complement of chromosomes from a cell, and injecting it into a fertilized egg whose nucleus has been extracted. Division of the egg involves division of the nucleus, and the descendant nucleus in turn can be injected into other eggs.
After several transfers, the nucleus may be able to direct the development of eggs in complete organisms, genetically identical to the organism from which the original nucleus had been obtained. Therefore, this cloning technique is, in theory, capable of producing a large number of genetically identical individuals. These experiments have been successfully carried out on frogs and mice, but cloning of higher mammals had not been possible until February 1997.
It was then that the news was released that for the first time a group of scientists had successfully cloned a mature animal. These were the geneticists at the Roslin Institute and those at PPL Therapeutics, both near Edinburgh , Scotland , who had cloned a sheep from the tissue of the mammary gland of a six-year-old adult sheep, whom they christened Dolly’s name.
To produce the cloned sheep, scientists have used a genetic engineering technique known as nuclear transfer. From now on, the cloning of a living human being seems to be suddenly much closer, but this raises a series of ethical, legal and moral problems.
