Equation of State of Ideal Gases: Explanation of Boyle-Mariotte’s Law, Gay-Lussac’s First and Second Laws.
The state of a gas is always defined, at a macroscopic level, by a well-defined value of temperature , volume and pressure. Every time one of these quantities changes, a transformation of the state of the gas occurs . These transformations can be of three types:
- isothermal , which means that they occur at a constant temperature
- isobaric , which occur at constant pressure
- isometric (or isochore), which occur at constant volume.
An ideal gas (or perfect gas ) is an ideal model of gas for which the following three laws hold, which are valid based on the type of transformation:
1) Boyle -Mariotte ‘s law describes the changes of state that occur at constant temperature. In this case an increase in pressure (or volume) produces a corresponding decrease in volume (or pressure) according to the following law: p1V1 = p2V2 where p1 and V1 indicate the pressure and volume of the gas before the change (in pressure or volume) and p2eV 2 their final state.
The previous relationship can be represented on a Cartesian plane in which the volume is present on the abscissa and the pressure on the ordinate (the temperature does not appear since in this type of transformation it remains constant).
The curve drawn in the graph, from a mathematical point of view, is a hyperbola. The graphs of isothermal transformations will always be represented with a hyperbola that will change its characteristics based on the temperature.
2) Gay-Lussac’s first law or Charles’s law describes the changes of state that occur at constant pressure (isobaric transformations) and can be expressed by the following relationship (already introduced in the section dedicated to the expansion of gases ):
V = V0 (1+aT);
where V is the final volume, V0 is the initial volume, T is the temperature and a is the typical gas constant.
3) Gay-Lussac’s second law applies , instead, in the case of constant volume (isometric) transformations. In this case the change in temperature causes a corresponding change in pressure equal to:
p = p0 (1+aT);
where p is the final pressure, p0 is the initial pressure, T is the temperature and a is the typical gas constant mentioned previously.
A gas for which the laws are true is an ideal gas . For this type of gas, the ideal gas equation is also true , which contains the previous laws:
pV=nRT where:
– p indicates the value of the gas pressure;
– V the volume occupied by the gas;
– n is the number of moles of the gas;
– R is the universal gas constant, whose value is a function of the units of measurement adopted to express the other quantities in the equation;
– T is the absolute temperature of the gas, generally expressed in kelvin.
The value of R in the International System is 8.314472 J/(mol K); in calculations the value of 0.0821 l atm/(mol K) is also often used.
The same law is sometimes expressed in the following way: pV=NkT.
In this case where N is the number of molecules, T is the temperature and k is a constant (called Boltzmann constant in honor of the Austrian physicist L. Boltzmann (18844-1906) who introduced this quantity).
The constant k is one of the fundamental constants of nature that is used in many other relations in physics.
Typical question: “How can you relate R and k?” To answer this question, it is necessary to recall the definition of the mole quantity given in chemistry: a mole is the quantity of substance that contains as many “elementary entities” (i.e. atoms or molecules) as there are in 12 g of carbon-12.
The number of these “elementary entities” is indicated by Avogadro’s number (in honor of the Italian physicist Amedeo Avogadro (1776-1856)) and is equal to:
NA=6.022*1023molecules/mol.
Therefore, starting from the two relations, pV=nRT and pV=NkT, and equating both second members of the relations, we have:
nRT=NkT.
Finally, simplifying T in both relations, we obtain: nR=Nk.
PERFECT GAS LAW: EQUATION AND EXPLANATION
The ideal gas law , unlike the previous ones, is always valid in any condition while the others were valid only in particular cases (at constant pressure or constant volume for example).
As already observed, this equation represents a generalization of the empirical laws observed by Boyle, Gay-Lussac and Charles, obtainable respectively by setting T = constant, p = constant and V = constant.
The equation of state for ideal gases describes well the behavior of real gases for pressures that are not too high and for temperatures that are not too close to the liquefaction temperature of the gas. In these cases, a better description of the behavior of the gas is given by the Van der Waals equation of state .
The properties of an ideal gas can be indicated from a microscopic point of view and it is found that it possesses the following characteristics:
1. the molecules are point-like;
2. they interact with each other and with the walls of the container by means of elastic collisions;
3. there are no forces of interaction at a distance between the gas molecules;
4. the average kinetic energy of the gas molecules is directly proportional to the temperature.
Real gases are described by the ideal gas law to a good approximation only when the pressure is sufficiently low and the temperature sufficiently high.
The ideal gas equation of state , also known as the ideal gas law , describes the physical conditions of a “perfect gas” or “ideal” gas, relating its state functions: amount of substance, pressure, volume, and temperature.
THE IMPORTANCE OF MODELS IN PHYSICS
In physics, models are fundamental. From a certain point of view, we can say that physics (but in general all sciences) describe reality through a modeling that very often consists of a simplification that allows to explain some characteristics of a process too complex to explain without them.
In scientific and technical use, a model is a representation of an object or phenomenon, which corresponds to the modeled thing in that it reproduces (possibly in light of a certain interpretation) some of its fundamental characteristics or behaviors, in such a way that these aspects can be shown, studied, known where the modeled object is not accessible.
ABSOLUTE TEMPERATURE
Experimentally it has been observed that there is a temperature below which it is not possible to cool a body. In fact, if we take different gases, they have different pressures at any given temperature. However, if we cool them we observe that they all tend to the same temperature (precisely -273.15 °C) when the pressure tends to zero.
This temperature is called absolute zero. This absolute zero is obviously very different from the 0°C that is often measured on winter days. Absolute zero was taken as a reference to set the scale (called for this reason “absolute temperature scale”) that has already been introduced in the pages on temperature and thermometers and coincides with the temperature of a body expressed in Kelvin. Absolute temperature is one of the main quantities used in the study of thermodynamics .
To convert an absolute temperature to the corresponding (and more common) temperature in degrees Celsius, simply subtract the value 273.15K. This is possible because 1 degree Kelvin is equal to 1 degree Celsius and 0 degrees Celsius is equal to 273.15 degrees Kelvin. For example 298.15K is equivalent to 298.15K – 273.15K = 25°C.
