How to improve the latency of a WiFi network and reduce the delay?

When we are in a WiFi network. We have always liked that it flows properly , and that it never presents problems when being connected. As can be the delay, which WiFi devices usually present. To do this, we must improve the latency of the network and reduce the delay.

¿Cómo mejorar la latencia de una RED WIFI y disminuir el retardo?

By doing this, we can make the WiFi network better. Along with this, we can have a better signal when connected. But before doing so, we must find the reason for the delay in the network, and in this way, attack the problem, in order to increase the performance of the WiFi signal .

Index( )

  1. What is latency in more technical terms and what are its possible factors?
    1. What is Ping and what is it related to?
    2. What are the possible causes of the delay?
    3. When can rubber banding occur?
    4. Why is there latency when the user’s network has problems?
    5. When the failure comes directly from the server
  2. How is latency measured to verify if there are failures in it?
  3. What can be done to improve the latency of a WiFi network?
    1. The type of cable used is important.
    2. Check that the modem is working correctly
    3. Why does the number of connected devices affect latency?
    4. Applications also influence delays
    5. Call your supplier to solve any problem

What is latency in more technical terms and what are its possible factors?

Until nothing, you should know what latency is. This is the time it takes to transmit the information within the network . By this we mean that the faster the latency of your network, the faster the load time of a web page. Otherwise, it will take time to load.

  • One of the most obvious factors. It is the distance thatthe two points that try to establish a connection can have, that is why the signal does not arrive properly
  • Also, take into account the capabilities of the device you want to connect to. That is, if the device is old or obsolete, you will not have a clean connection.

What is Ping and what is it related to?

When we are talking about internet speed, we have to talk about Ping. The Ping is the internet speed meter that we have , and with it we can calculate the time it takes for the information to be received. This is very much related to the connection in the games, when it has a very high ping, the game will have a delay and will go slower.

What are the possible causes of the delay?

  • many connected devices
  • Poor coverage in the area where the WiFi signal is
  • Programs running in the background
  • Possible malware that affects both the device supplying the signal and the computer trying to connect

When can rubber banding occur?

On certain occasions, when we are playing online games, there are delays when playing. This is called Rubber Banding, and it happens more frequently, when there are more people on the server than normal and it exceeds the capabilities of the server .

Why is there latency when the user’s network has problems?

The problems that can occur in the network can cause latency. This is because the ping on the network is higher than usual, and it greatly affects network latency. It can be affected when  users use the network very intensively .

When the failure comes directly from the server

When we go to measure the connection speed , and we see something unusual, we can deduce that something is wrong with the server. In the event that the server is the problem, no matter how hard we do, we will not have access to the internet. Since it is this one that provides it to us, this may mean that the DNS will not be available.

How is latency measured to verify if there are failures in it?

To see network failures, you can measure latency to verify it. You can measure it thanks to ping, since it is the measurement expressed in milliseconds. An example would be that by having a ping of 10 ms, any website you enter will take  10 seconds to load and display the content.

What can be done to improve the latency of a WiFi network?

If so, it has a very low latency in your WiFi network. You can do something so that this can be better and you have a better internet connection. With these tricks, you can make your connection go faster , and have better access to pages that are usually very difficult to load due to their content.

The type of cable used is important.

The factor that can influence the most is the type of cable that is connected. The most recommended is to use an Ethernet type cable for the router or switch . In this way, we can leave the WiFi connection, for those devices that do not use wiring in the connection

Check that the modem is working correctly

An easy task to do is to check that the modem is doing the job correctly. With this we want to tell you that you keep abreast of how the modem is periodically. That you keep it away from dust and that where it is placed , it does not have any type of interference.

Why does the number of connected devices affect latency?

When there are many devices connected to the same network. It often happens that the network latency gets slower . This is because the resources in the connection are limited, and if you have a poor connection, it will be affected by not having capacity for all the computers.

Applications also influence delays

In many cases, programs can greatly influence the delays that the network can incur. In this way, these programs are usually very heavy for the network in question, and makes the entire connection for the program. Thus causing other areas to be affected

Call your supplier to solve any problem

A very good solution is to call the provider so that they can somehow solve the problem. In this way, it may offer you a better plan, a plan that has more internet capacity . You can also enter the official page of the service and see a better solution, Microsoft has a support for slow connections.

 

Leave a Comment