Energy sources: summary. Classifications, advantages and disadvantages of sources and how hydroelectric plants work.
Energy sources
Energy is the ability to do work. To light cities and road networks, to keep homes warm, to run technological devices and industries, energy is needed. The raw material is energy sources, that is , what nature has made available to us and that we can use directly in their natural state, the primary sources , or that we must transform so that they can be used, the secondary sources.
Primary sources and secondary sources
Primary sources are oil , coal, natural gas, water from rivers and lakes, the sun, the wind, the heat of the earth, nuclear fuels such as uranium, the force of waves and the sea. Secondary sources are, for example, products derived from the processing of petroleum, such as fuel oil.
Exhaustible and renewable sources
Energy sources are also distinguished, according to the duration of the sources, into:
- exhaustible sources , such as fossil fuels and uranium ;
- renewable sources , such as the water cycle, biomass , the origin of the winds, the origin of the tides and the sun.
According to the economic importance and the satisfaction of energy needs they are divided into:
- main sources , such as fossil fuels , thermoelectric power ;
- complementary sources, such as hydroelectric and nuclear ;
- alternative sources, such as photovoltaic , wind , geothermal , biomass or biogas and solar power plants ;
Advantages and disadvantages of energy sources
The energy sources present on Earth have both advantages and disadvantages:
- The Sun : Solar energy is free, inexhaustible and widespread throughout the world. It does not pollute and does not produce waste. On the other hand, the Sun is a non-continuous source, it disappears at night and when it is cloudy. The systems are very expensive and to produce good quantities of electricity it is necessary to cover large areas with solar panels.
- Coal, oil and gas : these are the most widespread sources, they are easy to use, they produce a lot of energy and can be transported, stored and used when needed. They have high calorific values. They are not renewable. Their price is variable and changes depending on the availability on the market and the international political situation. When burned, they produce sulphur dioxide, dust, nitrogen oxides and carbon dioxide: they must therefore be used with complex systems to prevent them from becoming sources of pollution for the atmosphere.
- Water : Water energy is abundant and clean. During the night, when energy demand is lower, water can be pumped up in some specialized plants, to be reused at times when energy is needed most. It is only available where there are rivers and natural or artificial reservoirs. Artificial reservoirs can have a significant environmental impact, modifying the hydrogeological balance and ecosystems.
- Geothermal : it is an inexhaustible and low-polluting source, very suitable for the production of thermal energy. Only some areas allow the use of geothermal energy.
- Wind : it is inexhaustible, does not produce waste and does not pollute. Only a few locations are suitable for the use of wind energy, which requires large surfaces, often on mountain ridges; the costs of building the plants are still high.
- Biomass: These are renewable sources. In the case of organic waste or agricultural waste, they use “recycled” energy. They can only meet a minimal part of energy needs. They are suitable for local uses.
- Uranium : produces clean energy as it does not cause greenhouse gas emissions. The availability of uranium is very large. It allows the development of large power plants that produce energy at low cost.
Hydroelectric power plants
The hydroelectric power plant transforms the hydraulic energy of a watercourse, natural or artificial, into electrical energy.
In general, the functional scheme includes the dam, a dam or a weir, which blocks the watercourse creating a reservoir that can be a tank , or a basin, where a nearly constant water level is maintained. Through adduction works, that is, the passage from the drinking water collection points to the tanks, canals and diversion tunnels, the water is conveyed into loading basins and, through forced conduits , into the turbines , through safety inlet valves and flow regulation devices that distribute water according to energy demand. The water activates the turbines and exits, ending up in the discharge channel through which it is returned to the river.
Directly conveyed to the turbine is mounted the alternator , which is a rotating electrical machine capable of transforming the mechanical energy received from the turbine into electrical energy . The electrical energy obtained must be transformed in order to be transmitted over long distances. Therefore, before being conveyed to the transmission lines, it passes through the transformer which lowers the intensity of the current but increases the voltage. Once it reaches the place of use, the electrical energy passes again through a transformer which, this time, increases the intensity of the current and lowers the voltage so as to make it suitable for domestic use.




