Decantation

Decantation . It is a physical method used to separate a heterogeneous mixture of different densities. These two mixtures can be liquid – liquid or liquid – solid.

Summary

[ hide ]

  • 1 Mission
  • 2 Required instruments
  • 3 Methodology
  • 4 Sources

Mission

The mission of the decantation is to remove particles, either by sedimentation or flotation, particles that in the case of water treatment may come from dissolved substances, which through oxidation have become insoluble (is the case of iron and dissolved manganese , which by oxidation become their insoluble oxidized state) or by the colloidal particles themselves in suspension in the raw water, most of which by coagulation-flocculation have become sedimentable. Other dissolved substances can be adhered or adsorbed by the clots-flocs and are eliminated in this way.

Following Stokes’ law for sedimentation, the time required for sedimentation of a 1 mm diameter sand particle would be 10 seconds, for a 0.1 mm fine sand particle it would be 2 minutes and for a 10 µm clay particle, time would be 2 hours. For a bacterium (1µm), the time would be about 8 days and for colloidal particles of sizes between 100nm and 1nm, the time to settle would be between 2 and 200 years. Hence the need for an aggregation of the particles so as to increase the size and speed of sedimentation, which is what is achieved with coagulation-flocculation.

Once the flocs are formed by the aggregation of the colloidal particles in suspension, they must be separated. This separation, if the direct filtration process is not being followed, takes place by sedimentation in the decanters. If the floc concentration is small, these in their fall and sedimentation, do not behave as an independent granular particle, but, due to the coagulant used, their sedimentation is affected in part by the nature of the latter, therefore, being considered as ” diffuse sedimentation “. When the concentration is higher (of the order of 0.5 gr / l), the sedimentation of the flocs as a whole is slowed down, the separation between the floc mass and the liquid being more easily distinguished. This type of sedimentation is called “sedimentation in block or piston “.

Required instruments

  • Decantation funnel
  • Beaker
  • Universal support
  • Double nut: it is placed on the vertical pole of the universal support and thus holds the clamp motionless.
  • Metal clamp: it is placed in the double nut and serves to hold the decantation funnel, so it remains in high torque after being able to place a beaker underneath to empty the funnel.
  • Mix to decant or separate.

Methodology

The decantation is based on the difference in density between the two components, which means that when left at rest, both separate until the least dense is located in the upper part of the container that contains them. In this way, it is possible to empty the densest content through the bottom of the container and transfer it to a new container or filter (if required). And it is made with a decanter, which allows the separation of heterogeneous mixtures, that is, mixtures that do not bind.

 

Leave a Comment

Scroll to Top