Types of Internet connection: Link mechanism with which a computer or computer network has to connect to the Internet , which allows them to view web pages from a browser and access other services offered by this network. Companies that provide Internet access are called providers ( ISPs ).
Summary
[ hide ]
- 1 Connection types
- 1 RTC
- 2 ISDN
- 3 ADSL
- 4 Cable
- 5 Satellite
- 6 Wireless Networks
- 7 LMDS
- 2 See also
- 3 Sources
Connection types
RTC
Switched Telephone Network (RTC) : also called Basic Telephone Network (RTB), it is the original and usual (analog) network. Voice vibrations usually circulate through it, which are translated into electrical impulses that are transmitted through two copper wires. This type of communication is called analog. The computer signal, which is digital, is converted to analog through the modem and transmitted over the telephone line. It is the network with the lowest speed and quality.
The connection is established by making a phone call to the number assigned by your internet provider. This process has a minimum duration of 20 seconds. Since this time is long, it is recommended that the automatic switch-off schedule is not less than 2 minutes. Its cost is a local call, although there are also special numbers with their own rate. To access the Internet we will only need a telephone line and a modem, either internal or external. The connection currently has a speed of 56 kbits per second and is made directly from a PC or in schools through a router or proxy .
ISDN
Integrated Services Digital Network (ISDN) : it sends the information digitally encoded, so it needs a
ISDN internal card.
network adapter, modem or ISDN card that adjusts the speed between the PC and the line. To have ISDN, you have to talk to a telecommunications operator to install this special connection, which is logically more expensive but allows a digital connection speed of 64 kbit / s in both directions. The appearance of an internal ISDN card is very similar to an internal PSTN modem. ISDN integrates a multitude of services, both voice and data transmission, in a single user access that allows digital communication between the terminals connected to it ( telephone , fax , computer , etc.)
Its main characteristics are:
- Point-to-point digital connectivity.
- Circuit switching at 64 kbit / s.
- Use of separate channels for signaling and information transfer (additional channel to data channels).
The ISDN connection divides the telephone line into three channels: two B or carriers, through which the information circulates at a speed of 64 kbps, and a D channel, of 16 kbps, which is used to manage the connection. The two B channels can be used independently (it is possible to talk on the phone on one of them and surf the Internet simultaneously), or use them together, which provides a transmission speed of 128 kbps. Thus, a connection that uses both channels (eg videoconference) will entail making two telephone calls.
ADSL
(Asymmetric Digital Subscriber Line or Asymmetric Digital Subscriber Line) : it is a technology that, based on the copper pair of the normal telephone line, turns it into a high-speed line. It allows to simultaneously transmit voice and data through the same telephone line.
In the ADSL service the sending and receiving of the data is established from the user’s computer through an ADSL modem. This data passes through a filter (splitter), which allows the simultaneous use of the basic telephone service (PSTN) and the ADSL service. That is, the user can talk on the phone while browsing the Internet, for this, three independent channels are established on the standard telephone line:
- Two high-speed channels (one for receiving data and the other for sending data).
- A third channel for normal voice communication (basic phone service).
MODEM ADSL connection diagram.
The two data channels are asymmetric, that is, they do not have the same data transmission speed. The data receiving channel has higher speed than the data sending channel. This asymmetry, characteristic of ADSL, allows higher speeds to be achieved in the network -> user direction, which is perfectly adapted to information access services in which normally the volume of information received is much greater than that sent.
ADSL allows speeds of up to 8 Mbps in the network-> user direction and up to 1 Mbps in the user-> network direction. The transmission speed also depends on the distance from the modem to the switchboard, so that if the distance is greater than 3 kilometers, part of the quality is lost and the transfer rate begins to drop.
An ADSL connection scheme could be:
Cable
Capable of achieving high transmission rates but using a completely different technology. Instead of establishing a direct, or point-to-point, connection with the access provider, multipoint connections are used, in which many users share the same cable.
The main consequences of the use of this technology are:
- Each node (point of connection to the Network) can serve between 500 and 2000 users.
- To achieve optimum quality of connection, the distance between the node and the user cannot exceed 500 meters.
- The cables of traditional telephone lines cannot be used to make the connection, being necessary that the coaxial cable physically reaches the place from which the user connects.
- The connection is shared, so as the number of users connected to the same node increases, the transfer rate of each of them decreases.
This technology can provide a maximum download rate of 30 Mbps, but modems are typically manufactured with a 10 Mbps download and 2 Mbps upload capacity. Either way, cable operators typically limit the maximum rates for each user to levels much lower than these, especially in the upstream direction.
satelite
In recent years, more and more companies are using this transmission system to distribute
PCI card.
Internet content or transfer files between different branches. In this way, existing congestion in traditional terrestrial networks can be alleviated.
The connection system that is generally used is a hybrid of satellite and telephone. You must have installed a digital satellite dish, a telephone access to the Internet (using a PSTN, ISDN, ADSL or cable modem), a receiving card for a PC, specific software and a subscription to a satellite provider.
The netizen sends his e-mails and the request of the Web pages, which
Digital satellite dish.
it consumes very little bandwidth, using a traditional modem, but the reception is produced by a satellite dish, be it computer programs, videos or any other material that occupies many megabytes. The download speed through the satellite can be placed in optimal cases around 400 Kbps.
Wireless networks
Wireless networks or wireless: Technology standardized by the IEEE that allows setting up local networks without using any type of wiring, using infrared or radio waves.
Satellite connection scheme.
radio at denormalized frequencies (free to use) .They are composed of two elements:
- Access point (AP) or “transceiver”: it is the base station that creates a coverage area where users can connect. The AP has one or two antennas and one or more Ethernet ports.
- Client devices: these are elements that have a wireless network card . These provide an interface between the customer’s network operating system and the airwaves, via an antenna.
The user can configure the channel (2.4 Ghz and 5Ghz bands are usually used) with which it communicates with the access point, so it could be changed in case of interference. The speed with the access point decreases with distance. Broadband wireless systems are known as BWS (Broadband Wireless Systems) and one of the most attractive is LMDS systems.
One example is the Wi-Fi , the Li-Fi and apart from the 2016 ‘s Project Loon from Google
LMDS
The LMDS (Local Multipoint Distribution System) : Point-to-multipoint communication system that uses radio waves at high frequencies, around 28 or 40 GHz. The signals that are transmitted can consist of voice, data, internet and video.
This system uses air as the transmission medium to link the telecommunications backbone with the subscriber. In this sense, a new subscriber loop is configured, with a high bandwidth, different from the traditional pair of copper wires that connects each domestic terminal with the nearest switchboard.
The frequency bands used occupy a range around 2 Ghz, for which the attenuation by atmospheric agents is minimal. Due to the high frequencies and the wide operating margin, it is possible to achieve a large communication bandwidth, with access speeds that can reach 8 Mbps. The system operates in local space through base stations and user receiving antennas. , in a bidirectional way. Line-of-sight from the base station to the subscriber is required so repeaters can be used if the user is located in areas with no signal.
The LMDS offers the same possibilities in terms of services, speed and quality as fiber optic , coaxial or satellite cable . The main advantage over cable is that it can offer service in areas where cable would never cost-effectively reach. Regarding the satellite, it offers the advantage of solving the problem of the great power of emission that is unnecessarily dispersed in covering wide geographic areas. With LMDS, the investment is profitable very quickly compared to previous systems. In addition, the costs of repair and maintenance of the network are low, since the communication is over the air, the physical network as such does not exist. Therefore, this system appears as a serious competitor for broadband systems.




