Turbocharger;how it works

The  turbocharger  is a mechanical component that serves to increase engine power by bringing more oxygen into the combustion chamber. We remind you that combustion occurs only in the presence of oxygen, without this element or in case of lack, the engine would not be able to push  the car.

Turbocharger: what it is and how it works . This explains how this mechanical component works and what the intercooler is for.

When you hear about  turbodiesel  or simply  turbo engines , we refer to engines that include a turbocharger among the mechanical components. What is it?

What is that?

The  turbocharger  is a mechanical tool capable of  exploiting the exhaust gases  produced by the engine itself to  increase the pressure  inside the combustion chamber.

The tubocompressori  are used on small aircraft and ultralight (to overcome the problem of low pressure in flight), boats and most of the diesel cars  and several  petrol cars . In the automotive sector, the presence of the  turbocharger  is generally indicated with the word “turbo”.

What is it for? As stated, it uses exhaust gases to  supercharge  an engine.

Turbocharger: how it works

To explain  how a turbocharger works  let’s try to imagine it in section, as in the image above.

The turbocharger consists of a “hot side” in contact with the exhaust gases and a “cold side”, consisting of a centrifugal compressor that sucks in the air to be compressed.

On the hot side, the turbocharger features a centripetal turbine that  receives the exhaust gases. The exhaust gases set in motion the turbine which is connected to a “cold side”. The cold side sucks and conveys the air into a special cylinder.

The turbocharger  thus succeeds in increasing the power supply of the internal combustion engines. The thermal energy of the exhaust gases, thanks to the cretripetal turbine, is converted into kinetic energy (movement!), It is the movement of the turbine that activates the “compressor” that sucks in the external air and conveys it into the combustion chamber of the engine .

In the image, with two yellow ovals we have indicated the two turbines, connected to each other by a celestial line (the tree). Thanks to that shaft, the kinetic energy (movement) is transmitted from one turbine to another (from the turbine on the hot side, to the turbine on the cold side).

To understand  how a turbocharger works,  let’s take the example of the classic  four-stroke diesel engine  .

Here, the air is pushed into the cylinder by atmospheric pressure. Air (or oxygen) is essential for combustion. In lack of oxygen, combustion does not take place. At high speeds, atmospheric pressure alone is not enough to allow enough air to flow into the combustion chamber. The scarce amount of air will, therefore, lower the efficiency of the engine.

The turbocharger uses the exhaust gases to drive a turbine capable of sucking in air and conveying it into the combustion chamber as shown in the video below.

In this way it is possible to introduce a greater quantity of air / petrol or air / diesel (in the case of diesel cars) into the combustion chamber (or combustion chamber ), thus ensuring greater performance in terms of power and acceleration capacity.

If it is true that the  turbocharger  is able to  increase the performance of the engine, it  is also true that sometimes it represents a “ballast” for the engine. At low rpm (up to 3,000 rpm), the turbocharger is a disadvantage due to the inertia of the exhaust impeller (hot side turbine) which slows down the exhaust gas output . At low revs, the cold side impeller is stationary or rotates very slowly… so it represents an obstacle for the  outgoing exhaust gas . At high engine speeds, this problem does not occur because the speed of the hot side turbine becomes  the thrust  for the  cold side turbine .

To obviate the inertia given by the turbine on the hot side, modern cars are not fitted with a single large turbocharger but several smaller turbochargers are fitted, in this way there are no tangible “ballast” at low revs.

An intermediate component, interposed between the turbocharger and the engine  is the intercooler .

What is the intercooler?

The intercooler has the function of  cooling the compressed and aspirated air  from the  turbocharger . The air, in fact, tends to overheat in the turbocharger. The intercooler causes more oxygen to reach the engine.

 

Leave a Comment

Scroll to Top