Stoichiometry

Stoichiometry . In Chemistry , (from the Greek “stoicheion” (element) and “metron” (measure)) is the calculation of the quantitative relationships between reagents and products in the course of a chemical reaction .

Summary

[ hide ]

  • 1 Origins
  • 2 Scientific principle
  • 3 Adjust or balance a reaction
  • 4 Stoichiometric coefficient
  • 5 Mixture / proportions / stoichiometric conditions
  • 6 Some concepts
  • 7 Source

origins

The first to enunciate the principles of stoichiometry was Jeremias Benjamin Richter ( 1762 – 1807 ), in 1792 .

Wrote:

“Stoichiometry is the science that measures the quantitative proportions or mass ratios in which the chemical elements are involved.”

Scientific principle

In a chemical reaction a modification of the substances present is observed: the reagents are modified to give rise to the products.

On a microscopic scale, the chemical reaction is a modification of the bonds between atoms , by displacement of electrons : some bonds are broken and others are formed, but the atoms involved are preserved. This is what we call the law of conservation of matter (mass), which involves the following two laws:

1.- The conservation of the number of atoms of each chemical element.

2.- conservation of the total charge.

The stoichiometric relationships between the amounts of reagents consumed and products formed depend directly on these conservation laws, and are determined by the (fitted) equation of the reaction.

Adjust or balance a reaction

What does it mean to adjust or balance a reaction?

A balanced chemical equation (which is nothing more than the written representation of a chemical reaction) must reflect what actually happens before the reaction begins and ends and, therefore, must respect the laws of conservation of the number of atoms and the full load.

To respect these rules, a number called a stoichiometric coefficient is placed in front of each chemical species, which indicates the proportion of each species involved (it can be considered as the number of molecules or atoms, or ions or moles; that is, the amount of matter that is consumed or is transformed).

For example:

In the combustion reaction of methane (CH 4 ), it combines with molecular oxygen (O 2 ) from the air to form carbon dioxide (CO 4 ) and water (H 2 O).

The unadjusted reaction (only representing the interacting elements) will be:

This reaction is not correct, because it does not comply with the law of conservation of matter. For the element hydrogen (H), for example, there are 4 atoms in the reactants (CH 2 ) and only 2 in the products (H 2 O). The reaction is adjusted by introducing a suitable stoichiometric coefficient in front of the chemical formulas of each compound.

Thus, if a 2 is placed in front of the H 2 O:

The conservation for carbon (C) and hydrogen (H) is respected , but not for oxygen (O), a situation that can be corrected by putting another 2 in front of O 2 in the reagents:

and thus, finally, the adjusted reaction is obtained.

It says that 1 molecule of methane (CH 4 ) reacts with 2 molecules of molecular oxygen (O 2 ) to give 1 molecule of carbon dioxide (CO 2 ) and 2 molecules of water (H 2 O). If we check the number of atoms we will see that on both sides of the equation there are 1 carbon atom (C), 4 hydrogen atoms (H) and 4 oxygen atoms (O).

Matter (the number of atoms) has been preserved after the chemical reaction is complete.

Stoichiometric coefficient

It is the coefficient (a number) that corresponds to each chemical species (element) in a given chemical equation . In the example above:

The coefficient of methane is 1, that of oxygen 2, that of carbon dioxide 1 and that of water 2.

Stoichiometric coefficients are in principle whole numbers, although fractional numbers are sometimes used to adjust certain reactions. In essence, what this coefficient indicates is the number of molecules of each substance.

When the stoichiometric coefficient is equal to 1, it is not written.

Therefore, in the example CH 4 and CO 2 do not have any coefficient before them.

This trial and error method of setting the stoichiometric coefficient works well when the reaction is simple. It consists of arbitrarily setting a coefficient and deducing the others by balancing the atoms involved in the initial species.

If fractions appear, all coefficients are multiplied by the least common multiple (lcm) of the denominators.

In more complex reactions, such as redox reactions , the ion-electron method is used .

It is recommended to balance in the order: metals , nonmetals , hydrogens, oxygens.

Mixture / proportions / stoichiometric conditions

When the reactants of a reaction are in amounts proportional to their stoichiometric coefficients, it is said:

  • The mixture is stoichiometric;
  • The reagents are in stoichiometric proportions;
  • The reaction takes place under stoichiometric conditions;
  • All three expressions have the same meaning.

Under these conditions, if the reaction is complete, all reagents will be consumed giving the stoichiometric amounts of corresponding products.

Example:

– How much oxygen is necessary to react with 100 grams of carbon producing carbon dioxide?

Atomic mass of oxygen = 15,9994.

Atomic mass of carbon = 12.0107.

The reaction is:

To form a carbon dioxide molecule, you need one carbon atom and two oxygen, or what is the same, one mole of carbon and two mole of oxygen.

1 mole of carbon

2 mol of oxygen 12.0107 grams of carbon

2 * 15,994 grams of oxygen 100 grams of carbon

x grams of oxygen

clearing x:

operations performed: x = 266.41 grams of oxygen

Some concepts

To understand stoichiometry, it is necessary to have conceptual clarity of the following terms:

Stoichiometry: It is the term used to refer to all the quantitative aspects of composition and chemical reactions.

Composition stoichiometry: Describes the quantitative (mass) relationships between the elements of the compounds.

Symbol: It is the graphic representation of an element. The symbol of an element represents not only its name, but also an atom or a prefixed number (“mole”) of atoms of that element.

Chemical Equation: is the graphic representation of a chemical change. A chemical reaction always involves the transformation of one or more substances into another or others; that is, there is a regrouping of atoms or ions, and other substances are formed.

Element: It is a substance made up of atoms of a single class; all atoms have the same atomic number Z.

Isotopes: They are atoms that have the same atomic number Z but whose masses are different.

Ion: Atom or group of atoms with electric charge.

Atomic number, Z: of an element is the number of protons contained in the nucleus of an atom of the element; this number is equal to the number of electrons surrounding the nucleus in the neutral atom.

Mass number (number of nucleons). It is the sum of the number of protons and the number of neutrons of an atom.

Mass defect: It is the difference between the mass of an atom and the sum of the masses of its constituent particles (protons, neutrons and electrons).

Formula: Combination of symbols that indicates the chemical composition of a substance. Unit formula or unit formula.- The smallest repetitive unit of a substance, a molecule for non-ionic substances.

Empirical formula (simplest formula): It is the simplest formula that expresses the relative number of atoms of each class it contains; the numbers in the empirical formula must be integers.

Molecular formula: Indicates the number of atoms of each class that are contained in a molecule of a substance. It is always some integer multiple of the empirical formula.

Hydrate: Solid compound that contains a defined percentage of water bound to it.

Law of Defined Proportions (Law of Constant Composition): Statement that different samples of pure compounds always contain the same elements in the same mass proportion.

Atomic mass unit (amu): Twelfth part of the mass of an atom of the isotope of carbon -12; unit that is used to establish molecular and atomic weights, which is called dalton.

Atomic mass: Of an atom is the mass of the atom expressed in units of atomic mass.

Atomic Weight: The average weight of the masses of the constituent isotopes of an element; relative masses of the atoms of different elements.

Molecular mass: It is the one that is obtained as the sum of all the atoms that intervene in the molecular formula of a substance.

Molecular weight: Mass of a molecule of a nonionic substance in units of atomic mass .

Formula mass: – It is the one obtained as the sum of all the atoms that intervene in the empirical formula of a substance.

Formula weight: – The mass of a unit formula of substances in units of atomic mass.

Percent composition: The percentage of mass of each element in a compound.

Mol: It is the quantity of substance that contains as many elemental entities (for example, atoms, molecules, formula units, etc.) as there are atoms in 0.012 kg (12 g) of carbon-12; 1 mole = 6,022 x 1023 entities.

Avogadro’s constant: It is the number of elemental entities ( atoms , molecules , ions , etc.) contained in one mole of said entities; N = 6,022 x 1023 mol-1.

Molar mass: It is the mass of one mole of a substance.

 

Leave a Comment

Scroll to Top