Link energy

Link energy is the energy required to break one mole of these links. The particles attract each other by some force, which in immediate contact is excessively large, they perform chemical operations at small distances and their effect ceases to be felt not far from the particles.

Summary

[ hide ]

  • 1 Chemical reaction
  • 2 Link energy
    • 1 Enthalpy
  • 3 Bond dissociation energy
  • 4 Valencia bond theory
  • 5 Theory of molecular orbitals
  • 6 External links
  • 7 Sources

Chemical reaction

A chemical reaction consists of a new regrouping of the atoms of the reactants to form the products. This involves the breaking of certain links and the formation of new ones. If the energies of these connections were known, the enthalpy of reaction could be easily calculated.

Thus, for example, the energy of the hydrogen-chlorine bond is that corresponding to the reaction:

HCl (g) ® H (g) + Cl (g); DH = 431 kJ

whence it turns out that its value will be 431 kJ / mol.

The higher the bond energy, the stronger and more stable the bond will be. The reaction enthalpies between gaseous substances can be calculated approximately from the average bond energies . Indeed, taking into account that energy must be supplied for the breaking of links, while when new links are formed energy is released, it follows that:

DH = S (energy of broken bonds) – S ( energy of formed bonds)

Link energy

For one or more substances to transform into others, there must be a rearrangement of atoms, and for this, some bonds must be broken and new ones must be formed. The breakage and formation of bonds is associated with an absorption and release of energy. To break a bond, you need a supply of energy, which is called bond energy. And when that bond is formed, that same amount of energy is released. When chemical reactions occur, a breakdown of the existing bonds in the reagents also occurs, but “new bonds are formed in the products.

This process involves the study of the energy variation that allows determining the enthalpy variation of the reactions. The energy supply allows the breaking of the reactant bonds, this process is endothermic, but as the bonds between the products are formed, the process changes, becoming exothermic.

Why does this happen? Because the release of energy occurs.

The energy released in the formation of a bond is numerically equal to the energy absorbed in the breaking of that bond, therefore the bond energy is defined for the breaking of bonds.

Enthalpy

It is the study of the heat exchanged in the chemical reactions. To finish our study of the energy of bond, we should make clear some concepts frequently used in it.

  • System: A system is called a part of the physical universe whose properties are under investigation.
  • Border: Limits that define the space of the system, separating it from the rest of the universe.
  • Medium: It is the portion of the universe near the borders of the system, which can, in most cases, interact with the system.

When a chemical reaction occurs in a certain system, this leads to a heat exchange between the reaction system and the environment. Thermochemistry studies precisely these heat exchanges, as well as their use in carrying out work.

If the heat exchanged between the system and the medium is measured at constant pressure, it is called Enthalpy or calorific content and symbolized by the letter H. being that Enthalpy (H) is heat exchanged at constant pressure. In relation to heat exchanges, chemical reactions are classified into two types:

  • Exothermic Reactions: Those that release heat into the environment
  • Endothermic reactions: Those that absorb heat from the environment

 

Bond dissociation energy

In chemistry, the bond dissociation energy, D0, is a measure of the bond strength in a chemical bond. It is defined as the standard enthalpy change when a bond is broken by homolysis, with the reagents and products of the homolysis reaction at 0K (absolute zero). Thus, the bond dissociation energy of one of the CH bonds in ethane (C2H6) is defined by the process:

CH 3 CH 2 -H → CH 3 CH 2 + H

Do = ΔH = 101.1 kcal / mol (423.0 kJ / mol)

Bond dissociation energy is also known as bond dissociation enthalpy (or bond enthalpy), but these terms are not strictly correct as they refer to the above reaction enthalpy under standard conditions, and may differ from D0 in more than 3 kcal / mol (12 kJ / mol). The bond dissociation energy is usually different from the bond energy, which is calculated from the sum of the bond dissociation energies of all bonds in a molecule.1 For example, an OH bond in the water molecule (HOH) has a bond dissociation energy of 493.4 kJ / mol, and 424.4 kJ / mol is needed to break the remaining OH bond. The bond energy of OH bonds in water is 458.9 kJ / mol, which is the mean of the values. In the same way, the successive removal of the hydrogen atoms from methane has bond dissociation energies which are: 104 kcal / mol (435 kJ / mol) for D (CH3-H), 106 kcal / mol (444 kJ / mol) for D ( CH2-H), 106 kcal / mol (444 kJ / mol) for D (CH-H) and finally 81 kcal / mol (339 kJ / mol) for D (CH). Consequently, the bond energy is 99 kcal / mol or 414 kJ / mol (the mean of the bond dissociation energies). Note that if new bonds with less enthalpy form after dissociation, there will be a net loss of energy, and the overall process will be exothermic. Heterolithic bond dissociation energy is involved in the breakdown of chemical bonds by heterolysis. 106 kcal / mol (444 kJ / mol) for D (CH-H) and finally 81 kcal / mol (339 kJ / mol) for D (CH). Consequently, the bond energy is 99 kcal / mol or 414 kJ / mol (the average of the bond dissociation energies). Note that if new bonds with less enthalpy form after dissociation, there will be a net loss of energy, and the overall process will be exothermic. The energy of heterolytic bond dissociation is involved in the breakdown of chemical bonds by heterolysis. 106 kcal / mol (444 kJ / mol) for D (CH-H) and finally 81 kcal / mol (339 kJ / mol) for D (CH). Consequently, the bond energy is 99 kcal / mol or 414 kJ / mol (the mean of the bond dissociation energies). Note that if new bonds with less enthalpy form after dissociation, there will be a net loss of energy, and the overall process will be exothermic. The heterolithic bond dissociation energy is involved in the breakdown of chemical bonds by heterolysis.

Valencia bond theory

In the year 1927, the valence bond theory was formulated, essentially arguing that the chemical bond is formed when two valence electrons, in their respective atomic orbitals, work or function to hold the two nuclei together, by virtue of the effects of system power decrease. In 1931, based on this theory, the chemist Linus Pauling published what some consider to be one of the most important papers in the history of chemistry: “On the nature of the chemical bond”. In this paper, extending Lewis’s work, Heitler and London’s valence bond theory (TEV), and his own previous work, he presented six rules for bonding shared electrons, the first three of which were generally already known :

  1. The bonding of the electron pair through the interaction of an unpaired electron from each of two atoms.
  2. The spin of the electrons have to be opposite.
  3. Once paired, the two electrons cannot take part in additional bonds.

His last three rules were new:

  1. The electron exchange terms for the bond involve only one wave function of each atom.
  2. The electrons available at the lowest energy level form the strongest bonds.
  3. Of two orbitals in one atom, the one that can overlap in greater quantity with one orbital of another atom will form the strongest bond, and this bond will tend to arise in the direction of the most concentrated orbital.

From this article, Pauling would publish in 1939 a textbook: “On the Nature of the Chemical Bond” that would come to be called by some as the “bible” of modern chemistry. This book helped experimental chemists understand the impact of quantum theory on chemistry. However, the later 1939 edition failed to adequately explain the problems that seemed to be best understood by molecular orbital theory. The impact of valence bond theory declined during the 1960s and 1970s in tandem with the growth in popularity of molecular orbital theory, which was being implemented in many large computer programs. Starting in the 1960s,

Molecular Orbital Theory

Molecular Orbital Theory (TOM) uses a linear combination of atomic orbitals to form molecular orbitals, which span the entire molecule. These orbitals are frequently divided into bonding orbitals, anti-bonding orbitals, and nonbonding orbitals. A molecular orbital is simply a Schrödinger orbital that includes several, but often only two, nuclei. If this orbital is the type where the electrons are more likely to be between the nuclei than anywhere else, the orbital will be a bonding orbital, and will tend to keep the nuclei close. If the electrons tend to be present in a molecular orbital where they spend most of their time anywhere except between the nuclei, the orbital will function as an anti-bonding orbital, and will actually weaken the bond. Electrons in non-bonding orbitals tend to be in deep orbitals (close to atomic orbitals) associated almost entirely or with one nucleus or another, and then they will spend equal time between nuclei and not in that space. These electrons neither contribute nor detract from the bond strength

 

Leave a Comment

Scroll to Top