Aggregation states

Aggregation states . Matter exists in three physical states: solid, liquid, and gas.

Summary

[ hide ]

  • 1 Types of states
    • 1 Solid
    • 2 Liquid
    • 3 Gaseous
  • 2 Changes of state
  • 3 Of interest
  • 4 See also
  • 5 External links
  • 6 Sources

Types of states

Solid

Substances in solid state occupy a defined volume and normally have a certain shape and firmness, the mobility of the particles that constitute them in almost zero, with great cohesion. In this state the particles can only move by vibrating or oscillating around fixed positions, but they cannot move by moving freely along the solid. The particles are arranged in an orderly manner, with a geometric spatial regularity, which gives rise to various crystalline structures.
Some examples of the solid state are a stone, a hammer, a log, a chair, etc.

Liquid

A liquid also occupies a fixed volume, but it needs to be placed in a container. The volume of the liquid will take the shape of the container in which it is placed; the mobility and cohesion forces of its particles are intermediate. In liquids the movement is disordered, but there are associations of several particles that, as if they were one, move in unison. Increasing the temperature increases the mobility of the particles (their energy).
Some examples of the liquid state are water, soda, blood, juice, milk, mercury , etc.

Gaseous

A gas has no defined shape or volume, so it is stored in a closed container. The gas tends to occupy the entire volume of the container in which it is confined and its particles possess great kinetic energy, presenting disorderly movements. As the temperature increases, the particles move faster and collide with more energy against the walls of the container, thus increasing the pressure.
Some examples of this state are water when evaporating, hydrogen , carbon dioxide.

There is a fourth state called plasma. This state is considered to be formed by gases like helium in ionic form, it exists in stars and fire is a typical example.

State changes

Substances can change from one state to another if conditions change. These conditions are pressure and temperature .

The state changes are:

  • Fusion: Change that substances undergo when going from the solid state to the liquid with increasing heat.

Examples : Casting of steel to make sheets, tubes, etc. Smelting of the metals used in an alloy to mint a coin; fusion of a plastic to mold it, etc.

  • Evaporation: Change that is experienced when a liquid enters the state of vapor or gas due to increased heat.

Examples : Elimination of water in a jelly to obtain sugar ; removal of an organic solvent to obtain a crystalline solid; decrease of a volume of liquid thus concentrating a dissolved solid or even taking it to drying. Substances such as alcohol , acetone , gasoline , etc., in contact with the environment undergo vaporization without being supplied with heat, the phenomenon occurs due to the low pressure existing on them.

  • Sublimation: It is the passage from the solid to the gaseous or vapor state without going through the liquid state, requiring heat.

Examples : Few substances are known with this behavior and among them are iodine , arsenic , camphor , naphthalene , carbon dioxide and some more of an organic type.
“Dry ice” is solid carbon dioxide and in contact with the environment it goes directly to the gaseous state. A flavoring tablet suffers from this phenomenon. The opposite change, from gas or vapor to solid, is also called sublimation or degradation.

  • Solidification: This change requires heat removal and occurs when a liquid enters the solid state.

Examples : Once a plastic has been molded, a piece of steel or some alloy has been cast, it is necessary to wait for its solidification to obtain the desired piece in a solid state.

  • Condensation: It is the passage from the vapor state to the liquid state. This change also involves the elimination of heat.

Examples : When eliminating the water from a molasses or the solvent from a solution, it is necessary to recover these liquids, since they are in a state of vapor and at a high temperature, they are made to cool and condense, in the liquid state they are recovered and occupy less volume.

  • Liquefaction: It is the passage from the gaseous state to the liquid state. In addition to removing heat, the pressure must be increased to achieve the change.

Examples : Obtaining liquid air or any of its components, nitrogen and oxygen , which are gases and can be kept in a liquid state.
The temperature is so low (for example -196 ° C) that the properties of some substances change dramatically: the flowers solidify and break, a chicken hardens so that it can break with a hammer, mercury solidifies, etc. . The difference between a vapor and a gas is that the vapor condenses and the gas liquefies.

Of interest

  • Evaporation and boiling are two ways to produce the change from liquid to gas or steam. Evaporation occurs on the surface of the liquid. Boiling occurs throughout the mass of the liquid.
  • Each pure substance has its own melting temperaturecalled the melting point, at which point the vapor pressure of the solid balances with the vapor pressure of the liquid.
  • Each pure substance has its own boiling temperaturecalled the boiling point, at which point the vapor pressure of the liquid balances with the external pressure.

 

Leave a Comment

Scroll to Top