Magnetostriction Magnetostriction is the property of magnetic materials that causes them to change shape when in the presence of a magnetic field. The vibrations in the form of sound are caused by the frequency of the field fluctuations. This phenomenon is part of the cause that vibrations of 100 Hz or 120 Hz are found in electrical machines such as motors and transformers . It is a property of ferromagnetic materials to change shape in the presence of magnetic fields . To generate electricity, reverse magnetostriction is used, the application of compression changes the magnetic flux, which according to Faraday’s lawinduces an electric field. The effect was identified by scientist James Prescott Joule in 1842 when he looked at pure nickel .
Explanation
Internally, ferromagnetic materials have a structure that is divided into two domains, each of which is a magnetically polarized region. When a magnetic field is applied, the boundaries between the domains change and the domains rotate, these two effects are reflected in the dimensional change of the material. The reciprocal effect is the change in the susceptibility (response to a magnetic field) of a material when it is subject to mechanical deformation, it is called the Villari effect or the inverse magnetostrictive effect. Two other phenomena are closely related to magnetostriction: the Matteucci Effect , which consists in the creation of an anisotropyhelical of the susceptibility of a magnetostrictive material when it is subjected to a couple, and the Wiedemann Effect , which is manifested in the torsion of this type of materials when a helical magnetic field is applied to them. The Villari inversion is the change in the sign of the magnetostriction of iron from positive to negative when exposed to magnetic fields of approximately 40,000 A / m (500 Oersted ).
Magnetostrictive materials
Cross section of a transducer which contains: magnetostrictive material (inside), the magnetization coil, and the magnetic housing that completes the magnetic circuit (outside).
Magnetostrictive materials can convert magnetic energy to kinetic energy , or the other way around, and are used in the construction of actuators and sensors . The property can be quantified by the magnetostriction coefficient, L, which is the fractional change in length when the magnetization of the material increases from zero to the saturation value. This effect is responsible for the “hum” that can be heard near transformers and high-power devices (depending on the country, they can be 100 or 120 hertz , in addition to harmonics ).
The cobalt exhibits the largest magnetostriction at room temperature of all pure elements, reaching 60 parts per million (ie 6.0 × 10-5 m / m), between the alloys, the higher magnetostriction known so far presents the Terphenol-D (an alloy of terbium , dysprosium and iron ), which has shown a magnetostriction of 2000 parts per million (0.002 m / m) in a field of 160 kA / m at room temperature and is the most commonly used material in applications magnetostrictive. Another very common magnetostrictive material is the amorphous alloy Fe81Si3.5B13.5C2, whose trade name is Metglas 2605SC, this material has the quality of a high magnetostrictive saturation constant, λ.
