Having trouble with your Mac shutting down unexpectedly? Follow these troubleshooting steps to diagnose and resolve the issue.
Although, at first glance, you might think that the Mac is a practically perfect computer, you have to take into account that it also has errors. One of the most typical ones can be the unexpected shutdown of the computer and that can be very annoying, especially due to the loss of information. We will tell you the possible causes and solutions.
It can be a hardware or software problem, so no option should be ruled out. Sometimes, even through bad luck, more than one can occur, and we will have to solve both to enjoy the device properly again.
The problem may be in the hardware
Obviously, when an electronic device starts to generate some kind of failure, the point should be to its hardware. Any internal component, in the event of an error, will first not start up correctly. And although there are many components inside a Mac, such as GPU, CPU or RAM, if just one fails, the problem will be that the computer will not turn on. This applies to both a MacBook and an iMac.
Check the connected accessories
Although we often talk mainly about the internal components of any computer, we must also take into account the connected peripherals . In this case, this includes a mouse, a keyboard or even an external storage unit. In this case, these devices can create different conflicts with the software and cause the device not to start correctly. In this situation, what you will have to do is choose to disconnect all the devices that are connected and perform different operational tests. Specifically, the steps to follow are the following:
- Turn off your Mac.
- Disconnect all peripherals, such as hard drives or printers. If you have a desktop Mac, make sure only a display, keyboard, and mouse or trackpad are connected.
- Turn on your Mac.
- Use your Mac during the normal time it takes for the unexpected restart or sudden shutdown to occur.
- If the unexpected restart does not occur, turn off the Mac and connect one peripheral, then another, until it happens. This will help you pinpoint exactly where the problem is.
Check the use of its components
When a Mac shuts down, it is often not an error as such, but a protection system. It must be taken into account that the hardware has a maximum consumption limit, and if there is a high consumption of CPU, GPU or RAM, it will end up causing a shutdown of the device . In this way, the computer will be prevented from overheating and causing a general failure in the Mac chip. It must be taken into account that beyond the cost of the repair, it can also cause an accident that affects the user.
This is something that can become quite common, especially when using high-performance programs. In the Mac field, there are several that will require a lot of power from the CPU, GPU or RAM. There are different methods to determine the consumption of this hardware. The most common is to access Activity Monitor. Simply, you will have to put this name in the Finder itself , and when you access it you will see the processes and also the percentage for each of the sections. What you should avoid at all times is that it constantly reaches 100%. This would be a dangerous limit to be able to work comfortably and for safety reasons the process would be shut down.
In this situation, something that can also be detected in everyday use of the device is a significant lag. This, as always, is due to different security systems that the device has in case it is working close to this limit. As a general tip, you should always be aware of the hardware requirements for the different programs in order to always meet them.
Has the graph moved?
And even though this isn’t a problem that is talked about a lot, it has happened to me on 2 of my computers, so I have to mention it. And it turns out that, due to the type of use, movement and/or heat of the Mac, it is likely that the graphics card, which is soldered to the motherboard, has moved a few millimeters, especially when it reaches high temperatures and we don’t use our Mac resting on a table. This can cause a slight shift, which will lead to poor contact and is likely to cause sudden shutdowns. The Mac will work again when it cools down, however, with use, it may turn off again a few seconds or minutes after turning it on. If this happens to you, even if you think it’s not the reason (I didn’t think so), keep it in mind, and if you don’t find another fault, check your GPU.
One of the ways to fix this is to heat up the Mac voluntarily with a hairdryer, opening its lid and pointing it directly at the GPU, to try to get the contacts to heat up and return to their place. However, if you don’t know how to do it well, it’s better not to try it, because you could leave it worse. However, if you have no other choice, or the Mac is very old and you don’t care, because it can’t be worse, you can try it.
Is the RAM working properly?
RAM is primarily responsible for ensuring that the most basic processes are constantly running so that the computer can function correctly. In many cases, when it is working correctly, it is quite common to have restarts immediately when turning on the Mac. In this case, it does not matter if we are talking about a laptop or a desktop iMac.
It should be noted that some Mac computer models have removable memory (RAM). If you have recently installed memory or a hard drive (or SSD) in your Mac, make sure that it is compatible and that the installation was correct. If possible, remove it and test with the original memory or disk. The storage unit, although it may seem insignificant, it should be noted that in the end it is where the operating system is stored, which is responsible for all the internal components working correctly.
Perform a diagnosis on the Mac
If you do experience a hardware failure on your Mac, you should know that it can be brought to light through a diagnostic tool that is built into macOS. The Apple Diagnostics tool , formerly called Apple Hardware Test, can check your Mac for hardware issues. It’s ideal, as we’ve discussed above, if you suspect a fault with the processor, graphics, RAM, or power supply. It also suggests solutions and helps you contact Support.
In order to perform the diagnosis, you must first turn off the Mac and disconnect all peripherals. Also, you must make sure that it is located in a stable place. Then, if you have an Apple Silicon , you will have to follow the following steps:
- Turn on your Mac and hold down the power button while the computer starts up.
- Release the button when you see the boot options window, which includes a gear icon labeled Options.
- Press the Command (⌘)-D key combination on your keyboard.
Also, keep in mind that if you have an Intel processor , the steps to follow are as follows:
- Turn on your Mac and immediately hold down the D key on your keyboard while your computer starts up.
- Release it when you see a progress bar or are asked to select a language.
Are you working in the right conditions?
It should be noted that Macs are actually delicate devices. They must always be used in the most optimal conditions, although this is something that occurs in many devices, although it is true that the technology is much more sensitive to environmental conditions or also to the charging system it has.
Monitor your Mac’s temperatures
Electronic devices are always designed to operate at a suitable temperature. This is something that can be conveniently found on Apple’s support website and is something really important to keep in mind. Generally speaking , Macs should not be in environmental conditions that exceed forty degrees . This makes it imperative that, for example, it is in a room where the sun does not shine directly on the device. This is because it will be much easier for it to reach the maximum safe temperature of the CPU, which is normally 100 degrees.
When the maximum temperature is reached, it is quite likely that the computer will end up shutting down to prevent the internal components from being affected. Likewise, we also recommend that you do not expose the device to direct sunlight. This is something that can be very common in laptops when you are working outside the home. It is also important to keep in mind that you should avoid closing the ventilation ducts, either by using the Mac on your legs or by using it on soft surfaces such as a bed.
But just as with high temperature situations, it also extrapolates to low temperature situations. The range must be taken into account both at the top and at the bottom. It must always be in optimal operating conditions to function properly.
Anyway, this is very easy to check. If it suddenly turns off when it reaches a temperature that could burn your skin, it will be normal, and you will notice it. However, if it does so for no reason, and when it is neither hot nor cold, then you can rule out this reason, since, as I said, it is very easy to detect.
Check that it is charging
It may seem like a completely logical thing to do, but it can often be overlooked. You have to take into account the specifications of the charging system used to manage power to the battery. There are many chargers on the market that are sold as compatible with any type of Mac. But in the vast majority of cases you have to be suspicious in this regard, and look at the technical specifications of the chargers.
In this case, you need to check the power and amperage offered by each of the chargers you want to use. You should know that the brand also has an influence, in order to properly manage the energy to the battery. But in the case of iMac, you need to check the specifications of the cable and the transformer that is included to be able to move all the internal components of the device. In the event that an iMac does not have the necessary power, the components of the device will stop.
If you have a MacBook connected to an external monitor check this out
If you happen to be using your MacBook connected to an external monitor for work, you need to make sure it is charging. If you connect your MacBook to an external monitor, you will need an HDMI cable and an adapter (except for newer models). Well, sometimes it can happen that your computer is low on battery, not charging and connected to the external monitor.
This means that it requires a lot more power to operate and can therefore cause your MacBook to shut down unexpectedly. And even ask you to charge the battery when you may have 20% or 30% left. The trick is to have it connected to the power when using it with an external monitor. This will not only prevent battery cycling, preventing it from being damaged, but also preventing our MacBook from shutting down unexpectedly due to the battery, as we will see later.
Check your Mac’s software
And although we have focused mainly on hardware, it should be noted that software can also be one of the main causes of these failures when starting the computer. Below, we analyze the necessary situations that are related to hardware.
Viruses can cause these failures
It is a fact that you can find numerous malicious files on the Internet that will attack your device. The consequences of running any of these are really varied, and one of these is the unexpected restart of the Mac or its sudden shutdown. It is certainly quite annoying, and it can be mainly related to the increase in certain processes when you are working with this virus installed. That is why it is really important to have maximum security on your computers when you are working on the network.
In this situation, what you will have to do is carry out a review of the latest installations you have made. This way you will be able to identify the possible software problem that you may have. Likewise, you can also run some kind of analyzer. This way, all the files on the storage unit will be analyzed to look for anything that is completely strange.
Also, check that it is updated to the latest version, as this could solve problems of any kind. It should not be the main cause of the Mac restarting, but it should never be ruled out.
Perform a system restore
In the most extreme cases that may occur in the operating system, it must be taken into account that in the vast majority of cases you should opt for restoration. In the case that you have a virus, the way to safely eliminate it is to finally remove all the files and copy them again. This is what is done with the restoration of the operating system, which in the end will leave the device completely new. The problem is that in these situations during the restoration another sudden shutdown occurs. This may be due to the fact that it is not related to the operating system but to a hardware component.
In this situation, what you will always have to do is make a backup beforehand in order to avoid losing information if the process in general ends up failing. As we have mentioned, it can be quite common that if the failure is not related to the software, a shutdown occurs during the installation process.
If you have a MacBook it may be a battery problem
MacBooks, in all their models, have internal batteries that do not degrade over time. And one of the symptoms that your MacBook has battery problems is that it suddenly turns off by itself and the battery indicator shows us that the battery is charged (in theory). When battery problems begin to appear in MacBooks, it may happen that you have, apparently, 70% battery, your MacBook turns off, and when you want to turn it on, the drawing appears asking you to plug the computer into the power.
It may also be the case that when you reconnect your computer to the power supply, it turns on and displays a different battery percentage than before. This can happen for various reasons, but it does not always mean that our MacBook needs a battery replacement and, therefore, we should go to Apple technical service. This would only happen if we see that the battery does this constantly and if our computer already has considerable battery wear.
However, if we have a MacBook with a short life span, the problem may be that it needs to perform a battery calibration. The vast majority of electronic devices, including MacBooks, have lithium cells in their batteries. These cells are responsible for retaining energy during charging, and releasing it when the computer is disconnected from the power supply. This charging and discharging process generates stress that, in the long run, ends up deteriorating the battery’s energy storage capacity. And although it is a natural process , due to the type of technology, the truth is that there may be times when the battery needs to “put everything in its place.”
When we charge our computer in ways that are not as common as those we use in our daily life, the battery can become unbalanced in its operation . In the same way, if we constantly use our MacBook, charging and discharging it. Whatever the case, battery calibration causes the lithium cells to “reposition”. In this way, if our computer has a healthy battery, we will avoid problems with false charges, along with the sudden shutdowns that this entails. That is why, now we are going to explain how to carry out this process.
The first thing to do is to use our computer normally and disconnected from the power supply. There is no need to ask it to perform tasks that require a lot of performance, or to have to turn up the screen brightness to the maximum. A use like any other, within the normal range . However, in this case, we have to wait for the battery to completely run out and for the computer to turn off. We do not have to turn it off ourselves, but rather, due to a lack of battery, it will turn off. When this happens, we should leave the computer at rest for about six hours. Completely off and without charging it.
When this time has passed, without opening the computer, we will take the charging adapter and plug it into the power supply. When we hear a sound, it will mean that the battery has started to charge. We have to let the computer charge for about 5 hours, until it reaches 100% battery. However, this process will take more or less time, depending on the size of the computer’s battery, as well as the power of the charger we use. Once we have the MacBook charged to 100%, we will only have to disconnect it and use it normally again. If we see that the computer has solved its shutdown problems, and the computer continues to indicate that the battery health is good, the calibration will have worked. On the other hand, if the computer continues to turn off, performs false charges and we see an alert message indicating that the battery status is not optimal, then it will be necessary to go to an Apple Store or a SAT and begin the battery replacement process.
Contact Apple Support
The last resort you have in this situation is to contact Apple Support. The company itself will carry out a thorough diagnosis of the computer and will review each of the components in order to provide a solution to the fault. The “trap” that you must take into account is that, a priori, the repair is free if it falls within the legal guarantee of the product . But this will only apply in the case that the device has not received any type of significant impact that could have affected its physical integrity. In the case that it is a problem related to Apple itself, you will have a full guarantee. In this way, the repair is free.
It should also be noted that the best thing to do in these cases is to go directly to an Apple store. These are the only ones authorized to carry out repairs on the equipment. This is because they have original parts to work with these devices. In addition, they have the necessary personnel to be able to carry out these repairs.
If you don’t have a store nearby, there are authorized points. For example, companies like K-Tuin or MediMarkt are authorized, so if you have one of these nearby, you can make an appointment and you will be attended by professionals just like those in an Apple Store, in addition to using original parts, and not losing the device’s warranty because of it.




