Bulldozer

Bulldozer. Self-propelled agricultural or civil engineering machine, used to remove (scarify) and lift soil, knock down trees, extract large stones and other similar tasks, generally for road construction operations, clearing land, etc.

Summary

[ hide ]

  • 1 Technical characteristics
  • 2 Operation
  • 3 Bulldozer mechanisms
  • 4 Source

Technical characteristics

A typical bulldozer has a motor with a power of about 160 hp and the blade has a working width of 3.8 m. Other models have more powerful engines and their blades can reach a width of up to 5.0m. The rear scarifying teeth can reach a working depth of 30 cm and even more, depending on the consistency of the terrain. The normal working speed is 3.0 – 7.0 km / h.

Functioning

They are self-propelled machines that consist of a front blade that cuts or scrapes the ground, accumulating the material and moving it to another place. The blade (also known as a shovel) can be raised for transfer, and lowered to put it in working position. It can also be given an angle of inclination in the transverse direction to unload the excess material to one side or to form speed bumps and similar works. The blade can also be used to push rocks, trees, or other obstacles to remove them from their anchor and move them. The team also has a set of teeth on its back to tear the ground. Sometimes it also has a row of smaller teeth on the lower edge of the shovel to remove the dirt when it reverses. In this way it takes advantage of the two directions of travel of the tractor: to the rear it tears the soil superficially and to the front it pushes the removed soil.

Bulldozer Mechanisms

  • The equipment’s energy source is a heavy tractor on mats, with all its driving and control mechanisms.
  • The blade or shovel constitutes the fundamental element, and is both a cutting organ and a momentary deposit of the cut material, which accumulates as the machine moves and can be unloaded, rather released, at the desired moment. Although the whole piece is called a blade, in reality it is a curved sheet that has a real blade attached to the ground to help penetrate, scrape the ground and cut its irregularities.
  • They are two lateral pieces articulated to the tractor frame and to the blade or blade assembly, which serves to raise and lower it.
  • Lift cylinder. It is the hydraulic cylinder that lifts the arms that hold the blade or sometimes the blade itself and lowers it.
  • (Also known by its English name: reaper (pronounced ríper.) They are three or more teeth placed at the rear of the tractor that serve to remove the ground.

 

Leave a Comment

Scroll to Top