Examples of Free fall and vertical throw

Free fall and vertical throw are two free vertical movements, characterized by the unique characteristic of following a single trajectory from top to bottom (in the case of free fall) and from bottom to top (in the case of vertical throw). They are called free fall because they have no frictional forces, that is, because they are considered, somewhat abstractly, to take place in a vacuum.

The simplicity of these two movements, due to the absence of resistive forces, makes them among the first to be incorporated into the teaching of physical sciences, a common practice in secondary schools. Weight or mass are not involved in the exercises associated with these two movements, and the fact that friction is not considered means that the shape of the object rising or falling is irrelevant.

The key to free fall and vertical throw is that they belong to the physical category of rectilinear, uniformly varied motion. This means that, as stated, they follow a single trajectory , not with a single velocity, but with a single acceleration : this acceleration is called gravity , a magnitude that on Earth is approximately 9.8 meters per second, for every second.

(*) Mathematically speaking, this is 9.8 M/S 2 , and it is explained by the fact that starting from an initial position, every second the speed will be 9.8 meters per second (a measure of speed) greater.

While the physical properties of both movements are similar, they differ in some characteristics. Below are the main differences between free fall and vertical shooting:

  • In free fall. The body is allowed to fall freely from rest without being thrown in any direction, so its initial velocity is considered to be 0.
  • In the vertical shot, the movement is from bottom to top with an initial velocity, while on the upward path the movement is slowed, with acceleration downward, and velocity upward. The vehicle’s velocity gradually slows down until it reaches 0 at the highest point of the path, at which point it begins a free-fall motion.

The following list will include some examples of free fall and other examples of vertical shooting, exercises with their corresponding solutions that facilitate their understanding.

It may be useful to you: Uniform rectilinear motion

Solved free fall exercises

  1. A ball is dropped from a building and takes 8 seconds to reach the ground. At what speed does the ball hit the ground?
    Solution: It moves at an acceleration of 9.81 M/S 2 for 8 seconds, or impacts at a speed of 78 M/S.
  2. In the previous exercise, what is the height of the building?
    Solution: The height of the building is calculated as half the acceleration, times the square of the time: in this case, it will be (½*9.81 M/S 2 )*(8S) 2 . The height of the building is 313.92 meters.
  3. An object falls in free fall at a speed of 150 m/s. How long did it take to fall?
    Solution: It takes approximately 15 seconds.
  4. What is the final velocity of an object in free fall, starting from rest and falling for 10 seconds?
    Solution: 98.1 M/S.
  5. On another planet, a mobile phone is thrown and takes 20 seconds to reach the ground, where it lands with a speed of 4 M/S. What is the acceleration due to gravity on that planet? Solution: The acceleration there is 0.2 M/S 2 .

Solved exercises for vertical shooting

  1. A projectile is launched vertically upward with an initial velocity of 25 M/S. How long does it take to reach its point of maximum velocity?
    Solution: Starting from 25 M/S, it loses 9.81 seconds each time. Therefore, it will take 2.54 seconds to reach the ground.
  2. In the previous exercise, what is the height corresponding to the maximum speed?
    Solution: The height is calculated as half the initial speed multiplied by the time. Here, 12.5 m/s * 2.54 s = 31.85 meters.
  3. A ball is thrown upward with an initial velocity of 22 M/S. What is its velocity after 2 seconds?
    Solution: 2.38 M/S.
  4. With what initial velocity must an arrow be shot vertically upwards so that it reaches a height of 110 meters in 5.4 seconds?
    Solution: Since speed is lost, we start from the final speed and add the product of time and gravity: 110 M/S + 5.4 S * 9.81 M/S 2 = 162.97 M/S.
  5. How long does it take for a moving object thrown upwards with an initial velocity of 200 M/S to come to a complete stop?
    Solution: It takes 20.39 seconds.

 

Leave a Comment

Scroll to Top