Electrical systems: the earthing network

What is the earthing network and how does it work in electrical systems.ELECTRICAL SYSTEMS: THE EARTHING NETWORK. It is absolutely mandatory to equip electrical systems with an earthing network to allow the electrical energy to be discharged to the ground without damage.

ELEMENTS OF THE EARTHING NETWORK. According to the CEI 64/8 standard, the earthing network must be made up of the following elements.

  • Earth rods (D): these are metal bodies placed in close electronic contact with the ground so as to disperse the electric currents. Earth rods can have a circular, tubular or solid section and a cross section; normally galvanized iron pipes are used. In their upper part there is an 8/10 mm hole in which the CT earth conductor is connected. The earth rod can be placed in a masonry or concrete well with a lid. In the construction of new buildings, earth rods are installed during excavation work and are connected to the iron of the foundation plinths
  • Earth conductors (CT) : it consists of a braid or a copper plate of adequate thickness that connects the dispersers to the earth collector
  • Earth collector (MT): it consists of a plate, or bar, equipped with special terminals on which the earth conductor, the protection conductors and the main equipotential conductors are connected. It is usually located in the basement
  • Protective conductors (PE) : they are made up of copper cables and have the function of connecting the various masses of each user to the MT earth collector
  • Equipotential conductors (E): their purpose is to ensure that there are no dangerous potential differences between accessible metal masses in a building to prevent them from becoming dangerous if touched by a person at a different potential.

Equipotential conductors can be main (EQP) or supplementary (EQS).
The cables that connect the permanent external masses directly to the earth collector are main; the single-core cables that connect the permanent external masses of the same environment to the main collector through a protective conductor are supplementary.

Leave a Comment

Scroll to Top