Nitration

Nitration . It is the process by which binding of the nitro group (NO is made 2 ) to a atom of carbon , which generally effect substitution atom hydrogen . It is one of the most commercially important chemical reactions. It is the reaction between an organic compound and a nitrating agent (for example nitric acid ) that introduces a nitro group into the hydrocarbon producing an ester.

Summary

[ hide ]

  • 1 Types of nitration
  • 2 Nitration Characteristics
  • 3 Main products obtained from nitration
  • 4 Some agents that generate the nitro group
    • 1 Nitric acid
    • 2 Nitrant mixtures of sulfuric acid
    • 3 Alkaline nitrates and sulfuric acid
    • 4 Organic nitrates (benzoyl acetyl nitrate)
    • 5 Metallic nitrates
    • 6 Nitric anhydride
    • 7 Nitrogen dioxide
  • 5 Nitro derivatives
    • 1 Nitroparaffins
    • 2 Nitric acid
  • 6 Aromatic nitration
    • 1 Nitration of benzene
  • 7 Factors influencing nitration
  • 8 Sources

Nitration types

Simple nitrations are converting glycerol into nitroglycerin with nitric acid of the cyanohydrin of acetone with nitric acid in acetic anhydride to obtain nitrate acetocyanohydrin and conversion of α-bromobutyrate in α-nitrobutirato ethyl nitrite sodium. According to the chemical structure of the nitrated product, example:

R – H + HO – NO 2 → R – NO 2 + H 2 O

Nitration can be classified as :

In each of the indicated examples, a nitro group replaces a hydrogen atom. However the nitro group can replace other atoms or groups of atoms, the Victor Meyer reaction is a typical example, where a halogen atom (especially bromine or iodine ) is replaced by a nitro group using silver nitrite (or sodium nitrite ).

Nitrated compounds can be produced by certain addition reactions such as nitric acid, or nitrogen dioxide with unsaturated organic compounds, for example olefins or acetylenes.

Nitration Characteristics

  • The nitration process is highly exothermic, delivering more than 30 Kcal / mol to the medium.
  • The heat of reaction, however, varies with the hydrocarbon to be nitrated.
  • The nitration mechanism depends on the reagents and the operating conditions.
  • Reactions can be of the ionic type or the free radical type.
  • The ionic type are commonly used in the nitration of aromatic hydrocarbons, simple alcohols, glycols, glycerols, celluloses and amines.
  • The free radical type occurs in nitration of paraffins, cycloparaffins and olefins, aromatic compounds and some hydrocarbons can sometimes be nitrated by reacting with free radicals, but generally with less success.
  • Solid catalysts are frequently used for these nitration reactions.

Main products obtained from nitration

  • Cellulosederivatives
  • Explosives
  • Nitrobenzene
  • Nitrotoluene
  • Nitrofurans
  • Nitroparaffins
  • Nitrophenols.
  • Nitrocellulose

Some agents that generate the nitro group

Nitric acid

The most important industrial method to produce it is the Ostwald process, with ammonia and molecular oxygen , and it is heated in the presence of the platinum – radio catalyst at 800ºC. Nitric acid is a weak nitrating agent since its constitution is altered during the process by the presence of the produced water. To overcome this it is necessary to resort to separation procedures of the water resulting in nitration, in order to maintain a relatively constant and satisfactory concentration of HNO 3 or to use an excess of nitric acid.

Nitric acid does not exist as a pure liquid because at rest it breaks down into:

4HNO 3 → 4NO 2 + 2H 2 O + O 2

The generalized nitration reaction with nitric acid is:

R – H + HNO 3 → R – NO 2 + H 2 O

The nitric acid necessary for nitration can be prepared right there by mixing alkaline nitrates and sulfuric acid .

NaNO 3 + NaHSO 4 → HNO 3 + Na 2 SO 4

Nitrant mixtures of sulfuric acid

Nitrating mixtures are made up of the substance to be nitrated, the nitrating agent and a dehydrating agent to remove water. The biggest advantage is that the sulfonitric mixtures only lightly tie the nitration tanks and apparatus.

Nitration is carried out with the mixed anhydride HOSO 2 – O – NO 2, which is obtained as follows :

HONO 2 + H 2 SO 4 → HOSO 2 – O – NO 2 + H 2 O

The generalized nitration reaction with nitrosulfuric acid is:

HOSO 2 – O – NO 2 + RH → R – NO 2 + H 2 SO 4

Alkaline nitrates and sulfuric acid

The nitric acid necessary for nitration is obtained from mixing an alkaline nitrate and sulfuric acid as seen in obtaining HNO 3 above. The alkaline salt is used as an agent, the bridge being the sulfuric acid that attacks the metal to regenerate itself.

Organic nitrates (benzoyl acetyl nitrate)

Acetic anhydride and nitric combine to form acetyl nitrate:

CH 3 – CO NO 2 O + O 2 CH 3 → COO – NO 2 → CH3 – CO NO 2

(acetyl nitrate)

Where what is nitrated is acetic anhydride, which serves as a bridge, being CH 3 – CO the dehydrating agent and the nitrating agent NO 2

Metallic nitrates

Some metals dissolved in acetic anhydride such as cupric, ferric and aluminum nitrates serve as nitrating agents . When amines are reacted, their acetylation and nitration are obtained.

M – (NO 2 ) 3 + 3R – H 3 R → NO 2 + M 3 H

(metal nitrate) (hydride)

Metals of families I, II and III are used. === Nitrogen Tetroxide === (N 2 O 4 ) Nitrogen Tetroxide shows little reactivity with Benzene, Chlorobenzene and Toluene . With this agent the union of two nitro groups occurs. The widespread reaction is:

R – H + NO 2 – NO 2 → R – NO 2 + HNO 2

The nitrous acid obtained is a reducer that must be oxidized to give nitric acid and must be handled with caution so that it does not react with the nitrated product.

Nitric anhydride

It is one of the most vigorous agents.

The widespread reaction is:

N 2 O 5 + R – H → R – NO 2 + HNO 3

Nitrogen dioxide

It is used for the catalytic nitration of paraffins .

Photochemical nitration with NO 2 with benzene and nitrobenzene in liquid or vapor phase results in the formation of nitrobenzene and dinitrobenzene respectively. NO 2 is a highly toxic yellowish gas with a suffocating odor.

Cu + 4HNO 3 Cu → (NO 3 ) 2 + 2H 2 O + 2NO 2

The widespread reaction is:

R – H + 2NO 2 → R – NO 2 + HNO 2

Light ( nitrous acid )

The light used is generally ultraviolet light. This process is dangerous with aromatic compounds because it can lead to polynitration.

Nitro derivatives

Nitroparaffins

The raw materials for the preparation of nitroparaffins are natural gas , petroleum , diluted nitric acid or nitrogen dioxide. To vaporize low molecular weight paraffins ( methane to decane ), high temperatures (300º to 500ºC) and relatively diluted nitric acid are used in the vapor phase . When a paraffin wax is nitrated in the vapor phase between 350º and 500ºC, all the monosubstituted derivatives that may result from the substitution by the nitro group of any of the hydrogen atoms or alkyl radicals present are possible.

The choice of the nitrating agent (substance that generates the nitro group) and the nitration technique are determined by factors such as the chemical constitution and physical properties of the organic compound to be nitrated and the economic characteristics of the process. Nitrating agents are complex since they have a very pronounced residual valence, that is, they accept electrons by nitrogen and electrons shared by oxygen atoms , in stabilization after nitration an acid is separated, which contains the group NO 2 forming part of the active labile complex. A labile compound is one that can be transformed into another compound with greater stability

Nitric acid

  • Nitrating mixtures, for example nitric acid mixed with a dehydrating agent such as oleum, sulfuric acid, acetic anhydride, phosphorous pentoxide.
  • Alkaline nitrates in the presence of sulfuric acid.
  • Organic nitrates like benzoyl acetylnitrates .
  • Metallic nitrates with acetic acid.
  • Nitrogen tetroxide.
  • Nitric anhydride.
  • Nitrogen dioxide

Aromatic nitration

It occurs with aromatic compounds thanks to an aromatic electrophilic substitution mechanism that includes the attack of an electron-rich benzene ring by the nitronium ion.

Nitration of benzene

The attachment of a nitro group to an organic compound can be carried out in two different ways: electrophilic nitration and radical nitration. The first is carried out with the species NO 2 + nitronium ion, which is a powerful electrophile. Benzene is nitrated thanks to the reflux of concentrated sulfuric acid and concentrated nitric acid at 50 ° C.

Electrophilic nitration is the method of choice in the preparation of aromatic hydrocarbons nitrated in the ring, due to the tendency of said family to react by electrophilic substitution. In the case of non-aromatic hydrocarbons, radical nitration is preferred, although the yields are low and complex mixtures are obtained. About 40% of the nitric acid that passes through the reactor forms nitroparaffins that can be removed by rectification. 60% of the remaining acid acts as an oxidizing agent which is preferably reduced to nitric oxide. Of the process are alcohols , carboxylic acids , aldehydes , ketones , oxides of carbon andwater .

Industrially, nitration is carried out continuously; nitric oxide is separated from the other reaction products and from excess unprocessed hydrocarbon, and is re-oxidized to nitric acid. Thus, more than 90 moles of paraffin can be obtained for every 100 moles of nitric acid consumed.

Factors influencing nitration

  • Temperature.

Temperature does not have a direct influence on the orientation of the -NO 2 groups , however, it has a notable influence on the purity of the reaction product. Raising the temperature increases the degree of nitration. When easily oxidized compounds are to be nitrated, it is very important to keep the temperature low enough to avoid oxidation. In aromatic compounds, temperature intervenes in the oxidation of nitrogen.

  • Agitation.

The nitration reaction can be verified in the acid phase as well as in the organic phase. By emulsion it can be achieved that each phase is always saturated with the other and, under these conditions, the reaction rate in each phase is constant, although in the acid phase it is several times higher than in the organic phase. The reaction rate decreases rapidly when the contact surface between the phases is reduced.

  • Solubility.

This factor indicates the solubility of nitro derivatives in sulfuric acid. As temperature increases, solubility increases; This decreases with the dilution of the acid. Since nitro derivatives dissolve better in the more concentrated sulfuric acid, using sulfonitric mixtures with a high concentration of H 2 S0 4 can reach a certain degree of nitration earlier.

Thermal data referring to the preparation and use of nitro derivatives.

  • The essential reaction in nitration takes place with a great release of heat.
  • The nitration heat decreases as the number of nitro groups introduced increases.
  • The heat of formation tends to a maximum for the second or third member of the series, and then decreases.
  • The closer the nitro groups are in the benzene ring, the higher the intramolecular stress and the lower the heat of formation.
  • Nitration apparatus

Nitrations are carried out in closed boilers, equipped with a stirring mechanism and devices to regulate the reaction temperature. Nitrators are typically constructed of acid-resistant cast iron and steel . In some cases, it is necessary to use stronger alloys , such as nickel – chrome steels . The two essential attributes of any safe and effective nitrator are heat transfer and agitation.

 

Leave a Comment

Scroll to Top