Sodium hydroxide

Sodium hydroxide . Its chemical formula is (NaOH), also known as caustic soda. It is an odorless crystalline white solid that absorbs humidity from the air (hygroscopic). Sodium hydroxide is very corrosive, it is generally used in solid form or as a 50% solution. It is used in industry (mainly as a chemical base) in the manufacture of paper , fabrics, and detergent .

Summary

[ hide ]

  • 1 Physical properties
  • 2 Chemical properties
  • 3 Obtaining
  • 4 Use
  • 5 Reactivity
  • 6 Indicator properties
  • 7 Information on health hazards
    • 1 Route of exposure
    • 2 Effects of overexposure
    • 3 Initial medical examination
    • 4 Periodic medical examinations
    • 5 Toxicological summary
  • 8 Sources

Physical properties

At room temperature, sodium hydroxide is an odorless, crystalline white solid that absorbs moisture from the air (hygroscopic). It is a manufactured substance. When dissolved in water or neutralized with an acid, it releases a large amount of heat that may be sufficient to ignite combustible materials. Sodium hydroxide is very corrosive. Generally used in solid form or as a 50% solution.

Chemical properties

  • Chemical function: Hydroxide
  • Reaction type: Corrosive, exothermic

Obtaining

Most of the sodium hydroxide is made by the causticization method, that is, by joining another hydroxide with a sodium compound. Although modernly it is manufactured by electrolysis of an aqueous solution of Sodium Chloride or brine. It is a by-product that results from the process used to produce chlorine .

Anode : 2Cl- → Cl2 (gas) + 2e-

Cathode : 2H2O + 2e- → H2 + 2OH-

As the electrolysis progresses, the chlorides are lost, being replaced by hydroxide ions , which, combined with the sodium cations present in the solution, form the sodium hydroxide. Sodium cations are not reduced to metallic sodium due to their very low potential.

Utilization

Sodium hydroxide is used to make soaps , crayons , paper, explosives, paints, and petroleum products . It is also used in cotton textile processing , laundry and bleaching, oxide coating , electroplating, and electrolytic extraction. It is commonly found in drain and oven cleaners. In addition this product is used as a drain cleaner.

Reactivity

Conditions that contribute to instability: None.

Incompatibilities: Contact with water, acids, flammable liquids and organic halogenated compounds, especially trichlorethylene , can cause fires and explosions. Contact with metals such as aluminum , tin and zinc causes the formation of flammable hydrogen gas. Contact with nitromethane and other similar nitro compounds causes the formation of impact sensitive salts.

Hazardous decomposition products: None.

Special precautions: Sodium hydroxide attacks some kinds of plastics , rubber and coatings.

Indicator properties

  • Odor threshold: Not available.
  • Level of eye irritation : Grant reports that sodium hydroxide “is very harmful to all tissues and causes some of the most severe eye damage.” The serious problem of sodium hydroxide and other alkalis that can cause significant eye injury was well and briefly described by Stanley, who particularly highlighted the dangers of household caustics, used as drain cleaners, that they contain sodium hydroxide. The effects of sodium hydroxide spatter on the eyes of humans have been described countless times … “Damage to the cornea, conjunctiva, and episcleral tissues is common, although damage to intraocular structures They are relatively rare. “

Evaluation of indicator properties: Due to its properties, sodium hydroxide is treated as a substance that lacks good indicator properties.

Information on health hazards

Exposure route

Sodium hydroxide can affect the body if it is inhaled or comes into contact with the skin or eyes. It can also affect the body if ingested.

Effects of overexposure

Sodium hydroxide is a strong alkali and is corrosive if contacted with any tissue. The effects due to inhalation of powders and mists range from mild irritation to destructive burns, depending on the severity of the exposure. Severe pneumonitis can occur. Sodium hydroxide in solid or powder form, mist, or in solutions can irritate the eyes and, if exposure is higher, can cause severe burns with a probability of blindness .

Sodium hydroxide, in the form of a solid or powder, mist or solutions, in contact with the skin, can cause irritations and, in case of major exposures, serious burns with destruction of tissues. Ingestion of sodium hydroxide in solid form or in solutions can cause severe burns to the mouth , throat and stomach . Death can ensue. After recovery after ingesting sodium hydroxide, severe scarring may remain in the throat. It reported an increase in the incidence of the cancer of the esophagus in people with scarring in the esophagus due to ingestion of sodium hydroxide.

Indicative symptoms: A doctor should be consulted if signs or symptoms are observed or observed and if they are suspected to be caused by exposure to sodium hydroxide.

Recommended Medical Surveillance: The following medical procedures should be available to those exposed to sodium hydroxide at potentially dangerous levels.

Initial medical examination

A comprehensive examination and medical history: Its purpose is to discover pre-existing conditions that could create a greater danger for the exposed worker and establish the basis for a future health control program . Emphasis should be placed on eye and airway examinations. The skin should be examined for evidence of chronic disorders.

36 X 43 cm chest roentgenogram: Sodium hydroxide damages the lungs of human beings. Exams are recommended lungs .

Tests of forced vital capacity and forced expiratory volume (1 second): People who have impaired respiratory functions can increase the risk by exposing themselves. Periodic examinations are recommended.

Periodic medical examinations

The medical examinations mentioned above should be repeated annually unless an X-ray examination is necessary , as indicated by the results of the pulmonary function test or signs and symptoms of respiratory disease.

Toxicological summary

Sodium hydroxide is a strong alkali. Fog, dust, and solutions contained in this product can cause serious injury to the eyes, mucous membranes, and skin. Although inhalation is generally a secondary industrial risk, the effects of dust or mist range from mild nose irritation at the 2 mg / m3 level to severe pneumonitis, depending on the severity of The exhibition.

The main danger lies in the rapid destruction of eye or skin tissues by contact with this product, either in solid form or in concentrated solutions. Sodium hydroxide in contact with the eyes can cause disintegration and detachment of the conjunctival and corneal epithelium, corneal opacification, pronounced edema and ulceration. Between 7 and 13 days after exposure, a gradual recovery or an advance of corneal ulceration and opalescence begins.

The complications derived from severe burns to the eyes are: simblepharon (adhesion of the eyelid to the eyeball) with hypergrowth of the cornea due to vascularization of the membranes and a progressive or recurrent ulceration of the cornea and permanent opalescence of the cornea. On the skin, solutions that are between 25 and 50%, cause a feeling of irritation in approximately 3 minutes; this occurs even after several hours in 4% solutions. If not removed from the skin, severe burns with deep ulceration occur. Exposure to dust or mist can cause multiple small burns with temporary hair loss.

The ingestion causes severe pain in the esophagus , stomach, corrosion of the mouth , throat, tongue , the pharynx and vomiting of large pieces of mucosa. There are cases of squamous cell carcinoma in the esophagus, with latent periods of 12 to 42 years after ingestion. These forms of cancer may be a sequel to tissue destruction and possibly scarring or eschar, rather than a direct carcinogenic effect of sodium hydroxide.

 

Leave a Comment

Scroll to Top