Horseshoe. A curved piece of metal that the blacksmith attaches with shoeing nails to the underside of the hooves of horses and mules, in order to protect them from wear and tear and other damage during their journey over the terrain when they are used as work animals.
Historical background
Remains have been found in many caves showing that horses were consumed by ancient civilizations, but it is not known exactly when they began to be used as work animals. Bits and pieces of harness from the Bronze Age have been found , showing that the horse was already domesticated some five millennia ago.
Since equines began to be used for riding, carrying and pulling, it was evident that their hooves were easily damaged by contact with the ground and stones, so it became necessary to protect them. At first, some types of sandals made of hard leather were used, but with the development of metallurgy, metal horseshoes emerged.
The work of shoeing
The blacksmith is the worker who performs the function of shoeing horses, a job that generally complements the manufacture of nails and horseshoes in his workshop called a forge . The most common tools for shoeing are: pliers, gouge, rasp, hammer, plane, cotter pin and others. In the blacksmith workshops the most common utensils are: forge , anvil , sledgehammer , hammers , tongs , punches , chisels , shears , and others.
Types of horseshoes
Although in other countries there are many types of horseshoes that are appropriate to the climate and soil conditions, as well as accessories for them, the most common ones are similar to those used in Cuba, which consist of a sheet of steel bent into a U shape, with holes to hold the head of the nails. The variations in our conditions are only dependent on the species to which they are dedicated.
For horses . These are the most commonly used and only differ from each other in size, which depends on the animal’s development.
For mules . Their only difference is that they are somewhat narrower than those used for horses, that is, the distance between their two branches is shorter, and they are less curved.
For oxen . Although they are sometimes necessary for the use of oxen on rocky terrain, they are practically never used in our conditions. They differ from equine horseshoes in that they are two-piece, since bovines have two “toes”.
Parts of horseshoes
Arch . The central arch of the horseshoe is the part that goes forward, and since it suffers the most impact, some blacksmiths make the sheet metal a little thicker in that section to compensate for wear, and no holes are made in this area.
Branches . These are each of the two lateral wings of the horseshoe, in which the holes for the horseshoe nails or shoeing nails are made.
Nail holes . These are holes in the shape of an inverted truncated pyramid (pyramidal truncated cone), in which the head of the horseshoe nail is lodged. In some countries they are replaced by an elongated slot, but this weakens the hold of the nails. The blacksmith carves them with a punch. Each branch of the horseshoe has 4 or 5 holes.

