The performance of the system may be affected because of failures or reversible alterations. Microsoft recognizes that these problems are common so it provides tools to users. In this sense, it is important that you know how to create a recovery disk either with Windows 10 and 11 as well as in previous versions.
Index( )
- How can you create a disk during Windows startup?
- On a Windows 11 PC
- From Windows 10 or earlier versions
- How to use a recovery disc to troubleshoot problems in Windows?
- What is the best way to reset your computer to a previous point?
- What can you do to repair your boot or startup?
How can you create a disk during Windows startup?
It is possible to create a disk during Windows startup by using advanced system options . To do so, click on ‘Restart’ from the start menu and then hold down the ‘Shift’ key. Wait a few seconds while the computer boots.
You will see an interface with several options from which you must select ‘Troubleshoot’. Then click on ‘Advanced Options’ and ‘System Image Recovery’. Follow the instructions in the wizard and select the drive where you want to save the image.
You need to insert an external USB disk or DVD to store the system image and then select ‘update’ before proceeding to create the image. If the USB device is not recognized on your PC, insert the unit into another USB port. You can also use a network location or a partition on your hard drive.
On a Windows 11 PC
On a Windows 11 PC you must use an external disk with a capacity of at least 8 GB. Once you insert the drive, go to the start menu and look for the option ‘Recovery drive’ or type ‘Recovery drive’ from the system finder.
Click ‘Open’ and watch the system start searching for a suitable USB drive. When Windows detects the USB disk that you previously inserted, press the ‘Next’ button. The wizard will ask to format the drive , therefore, press the ‘Create’ button and wait a few seconds.
Hence, all the data on the USB drive will be deleted. Then it will automatically start the recovery disc creation process. This step can take several hours and will depend on the speed and overall performance of your computer. Finally, you need to configure the BIOS to boot from the disk you just created.
From Windows 10 or earlier versions
From Windows 10 the restoration process can be carried out through the configuration. Choose the category ‘Update and security’. Then, click on ‘Recovery’ which is in the left panel and in the ‘Reset this PC’ section press the ‘Start’ button. An assistant will guide you through the recovery process .
On the other hand, to create a restoration disc in Windows 10 you will have to type ‘recovery unit’ in the system search engine. Click on ‘Open’ to access the application and check the option ‘ Make a backup’ . Then, hit the ‘Next’ button, insert a USB drive, choose this drive and hit ‘Next’ again.
Finally, click on ‘Create’ to start the recovery disc creation process. This process usually takes considerable time as the system copies a large number of files to the recovery drive . Restart your computer and modify the BIOS boot to use the disk you just created.
In Windows 7, go to the ‘Control Panel’, choose ‘Backup and Restore’ and click on ‘Create a system repair disc’. Insert a USB drive or DVD and hit the ‘Create Disc’ button. Thus, you will get a recovery disc in this version of Windows .
How to use a recovery disc to troubleshoot problems in Windows?
The recovery disc allows us to repair errors that may originate in the operating system, that is, from the software. Also, it facilitates the Windows reset process when the user deems it necessary. For this, a generic version of the system is used that is not inherent to the user or to an account.
What is the best way to reset your computer to a previous point?
The best way to restore the computer to a previous point is to take advantage of the restore tool either from Windows 10 or in previous versions. The particularity of each system is determined by the way in which the tool is accessed and the activation of the restore points.
In the case of Windows 10 you must access the ‘Control Panel’ from the start menu or by typing ‘control panel’ in the system search engine . Click on ‘Open’ and in the application window select the option ‘System and security’. Then click on ‘System’.
In the right panel choose ‘System Protection’ and press the ‘System Restore’ button. If this is the first time you are accessing this tool, the system will guide you through a series of steps in order to configure the procedure. Press the ‘Next’ button and see the available restore points with the creation date and time.
The system may have set multiple restore points. Choose the one with which you consider that the performance of the team does not fluctuate. The restore process does not remove documents, pictures, or other data, but rather the applications that were installed after a restore point was created.
What can you do to repair your boot or startup?
To repair the startup or startup of Windows you can use the automatic tool or use the command prompt . To achieve this, press the ‘Restart’ button and the ‘Shift’ key for a few seconds. When you restart your computer, click on ‘Troubleshoot’ and ‘Advanced Options’. Select the ‘Startup Repair’ option.
The system will search for an automatic solution . If it is not possible to apply this option, press ‘Advanced Options’ and choose ‘Command Prompt’. Type the command ‘sfc / scannow’ without the quotes and press ‘Enter’. It will start the repair process for all system files.
