When you buy a mobile that is perhaps not one of the most used, you can have a complex support and warranty service. So if your Xiaomi Redmi does not turn on or charge , before giving it up for lost, follow these steps and try to recover it.
Many Xiaomi users have had this problem and sometimes it does not have to do with the damage of the equipment or the battery . It is one of the most common failures, but less frequent than when the Xiaomi Redmi does not recognize the SIM card.
Index
- Causes why my Xiaomi does not turn on or charge
- presence of malware
- Corrupted applications or files
- device saturation
- How to solve the errors with the battery of my Xiaomi does not turn on?
Causes why my Xiaomi does not turn on or charge
That a Redmi does not turn on or charge can generate various events . One of them, and a very common one, is that the charger is defective and you just have to look for another charger .
- By alternating the cable and the power connector, it will be possible to know if one of these two is the problem. It is important to verify the output current of the chargers because it may be different and generate the failure if the charger is not original.
- In other frequent cases, when a Xiaomi Redmi does not turn on or charge, the charging pin may be dirty and does not allow proper charging. This can be fixed by cleaning the contact taking care not to damage the pins.
- The phone, when it does not receive a charge, turns off and then does not turn on because it does not have power, therefore, the mobile does not start again. Users believe that the cell phone has stopped working or it is something serious.
- Sometimes, doing a hard reset or factory reset a Xiaomi Redmi tends to leave the mobile off for a few moments. It’s crucial to understand that this is happening because the phone takes a bit of time to turn on and not something to do with the battery.
presence of malware
Malicious software will always be able to be present in the life of mobile telephony, affecting your device in some way. It may interrupt you at the time of turning on or when it does not load . These can enter in a simple way when downloading an application or just by opening a page that you have inside of this type of damage.
That is why it is always recommended to have a good and effective antivirus to protect you from all that malware that can cause changes to your mobile phone. If you continue with these, the device could be seriously damaged, so you must take care of these.
Likewise, even if you have them, your device will go through problems such as not charging or even not turning on. These are one of the symptoms that warns you that you have these faults . To prevent them, apart from downloading the antivirus, you can implement not opening strange websites that you do not know where they come from. Like, do not download the app on illegal pages, this can also bring you this type of virus.
Corrupted applications or files
That may be because your phone doesn’t charge or doesn’t turn on, but why is this happening? When you place documents or platforms on your device, new data is entering it, occupying part of your storage . Among these, it may happen that a type of information is corrupted and causes your phone to start failing.
|
|
To give you a solution to that, you can implement entering the settings boxes and placing in storage here. Now it goes into memory and there it clears the cache of all apps , you can also do this process separately, that is, application.
device saturation
This happens when many applications are open on your mobile phone . That can affect that your device does not charge and also does not turn on. To fix it, try to get out of all the platforms that you have open and when you go to enter a new one, close the rest so that you do not put this one in saturation.
Likewise, also try to clear the cache of the applications when you can , this will give you a gap in your storage, preventing you from having the problem of not charging the phone.
How to solve the errors with the battery of my Xiaomi does not turn on?
If the previous elements have been verified and this is not the case with your Xiaomi Redmi, there is another method. Thus, you can try to fix the mobile without taking it to a technician or taking a more risky action.
- Since the smartphone is turned off, the first thing to do is to press the volume down button and the power key. Keep them for a long time, until the mascot image of Xiaomi company repairing an Android appears and below it says ” Fastboot ” does not load.
- Once this happens it is important to be patient as it can take a long time to turn on. It should be noted that it is best to leave the smartphone and not touch any of its buttons until it is finished and the described image is removed.
There is evidence that many users for whom their Xiaomi Redmi does not turn on or charge, this method has worked . However, those who don’t have had to take more complex ways such as reinstalling the ROM on the phone.
This is because the error is generated in the software and when it does not turn on, it is the only way to make sure that it is not the operating system.
In conclusion, after this tutorial you already know why your Xiaomi does not turn on and stays on the logo .