As can happen with any mobile device, the Huawei P30 Lite or Pro cell phone can get stuck on the logo when it restarts. In many cases, it does not usually take too long after restarting for the device to continue with its power-on protocol.
From the Huawei platform solutions can be found for this, but the protocols that work for this problem are often confused. All this is given because some alternatives are not applied correctly for the solutions sought.
That is why here you can find more precise solutions that will be applied when your Huawei P30 Lite or Pro cell phone restarts and remains stuck on the logo.
Solutions found when the Huawei P30 Lite or Pro cell phone restarts and the logo stays stuck
Reboot the device in “Safe Mode”
In the first instance, you have to check if the problem is not because an application has recently been installed on the device. This can be verified when the cell phone is restarted in “Safe Mode”, being a simple process to perform.
First, the phone must be turned off and on until the Huawei logo appears . Once this is done, the power button is released to hold the volume down button, causing the device to start.
It must be released as soon as “Safe Mode” is visible in the lower left corner of the cell phone screen. In case the device is able to boot, the problem is in a recently installed application, trying to uninstall it to see if the problem is solved.
In case the problem is done but not solved, the Huawei P30 Lite or Pro operating system can be formatted and restarted .
Do a Hard Reset
The process to make a Hard Reset to a Huawei phone is easy to carry out, following some steps to the letter for its effectiveness. The first thing to do is enter Recovery mode , the device needing to be turned off for this.
Taking this into account, the phone is switched on with the power button and the volume down button pressed at the same time for 10 seconds. Thus, you enter the Recovery mode, in which a menu will appear in which you need the volume up and down keys to navigate.
As soon as the wipe data / factory reset option is found , move on to it and enter it by clicking on the lock key. You can see that it asks if you are sure you want to format the cell phone and lose the stored data, pressing “Yes All” to confirm and follow the procedure.
You enter the main menu again, finding the options at the beginning, searching and pressing Reboot system now. Thus, the formatting and reinstallation of the operating system will begin, resulting in being able to turn on the cell phone correctly.
Can the Huawei P30 Lite or Pro cell phone get stuck on the logo when it restarts?
Although it is a not so common case, it is possible that this incident could happen again on the Huawei cell phone. In case this happens, it is advisable to resort again to these found solutions, easily solving the situation.
However, it is possible that these are applied and the desired results are not obtained . In that case, alternatives such as updating the Huawei phone software to the latest version can be used.
All of this is because, in some way or another, it may be a reason for it to get stuck in the startup logo. Even if it is this way, it does not mean that it is the reason why it occurs, as it would be considered an extreme situation.
Once this measure is taken, the cell phone and its applications can be used without any problem. This makes it understandable that the Huawei P30 Lite or Pro is one of the most prominent models of this brand.
Each part of the solutions found makes good use of Huawei options on Android , so the device can continue to be used normally. In addition, the possibility of detecting other problems due to slightly more extreme inconveniences is highlighted .