Why do I get the message “No Bootable Device” when I start my PC?.When starting the PC, in general, it should not give any kind of problem. Unfortunately, computers are devices that are not exempt from possible failures, including the well-known “No Bootable Device” error. In this case, it is a problem with the boot disk. The good thing is that this error can be solved by following a series of steps that we are going to explain.
Why do I get the message “No Bootable Device” when I start my PC?
The boot disk of a Windows PC can be affected by different factors , so there is not only one to consider. Some may be related to computer software, or in other cases, it is a particular problem with the computer’s hard drive hardware.
And although there are several points that must be taken into account, for this occasion we bring you a method that you can quickly try on your Windows computer so that you can start the PC again without errors.
What is the problem
When a Windows computer fails to locate the bootable drive when the PC is turned on, the error message that appears on the screen is “ No Bootable Device ”. In this case, the operating system cannot find the storage disk. In addition, the reasons for this failure can be several:
- The PC’s hard drive has crashed .
- No operating system found on the hard drive.
- A PC drive connection is loose.
- The data for the boot configuration is corrupted (BCD).
- The boot order setting is incorrect .
Therefore, there are several causes that could have led to the PC not being able to recover the boot information . A simple crash or even the fact of having turned off the computer incorrectly can lead to this situation. But luckily there is a solution.
From the BIOS you can check, for example, the priority of the boot disk or if the PC unit is damaged. To enter you must do it during startup and keep in mind that the keys depend on each brand, so they can be: ESC, DELETE, F2, F10, F11 or F12 .
The most effective methods
One of the first alternatives that you will have is to use the Windows 10 or 11 DVD to repair or install the operating system again. In this case, when you insert the disk you will have to tap on the option Repair > Troubleshoot > Advanced options > Startup repair . Usually this method works, but not for all users. There is also the option of using a USB memory stick or ISO file to track these.
It is clear that this is the fastest option at all times, although if it has not given you any results, then there is no other option than to execute the CHKDSK command .
To do this, you have to go to the Windows DVD drive and follow these steps: tap on Repair your computer > Troubleshoot > Advanced options > Command Prompt > type the command CHKDSK C: /F and then CHKDSK C : / R . Now all that remains is to restart the PC and check that it turns on again without problems.