This article is aimed at all users who love technology and live connected to the Internet through Android tablets . However, there are many who have a vague knowledge of how to solve computer problems.
Solution to the Tablet Stays at the Android logo
This is common, especially when the tablet stays at the manufacturer’s logo. This may be due to a software or hardware issue , causing the Android logo or power logo to appear. It is a headache for every user when their tablet won’t boot up.
Therefore, we are going to talk about a situation that is more common than you imagine. Despite this condition, for some people it is difficult to solve once the tablet stays at the manufacturer’s logo or the tablet does not turn on, it stays at the logo. You can restart your tablet to fix this problem , no matter it is a Samsung or Lenovo branded Chinese tablet.
Index( )
- What causes my tablet to get stuck at the power on logo?
- battery errors
- Operating system or software failures
- lack of updates
- Programs with bugs
- Is this a problem without a solution?
- How to fix my Lenovo or Samsung tablet power on issues?
- What should I do if my Chinese tablet stays at the Android logo?
- What is a bootloop and how can we fix it?
- practical solution
What causes my tablet to get stuck at the power on logo?
There are many reasons why the tablet stays at the manufacturer’s logo most of the time. Or maybe it does, but it stays at the manufacturer’s logo, regardless of whether it’s a Samsung or Lenovo device . If you wonder why your tablet won’t boot up or stays at the power on logo, check out the following points.
battery errors
This type of conflict usually happens most of the time. At the moment, we have devices that have a battery built into the board and others that can be replaced. Assuming that your device is the second case, it is most likely causing the tablet to stay on the manufacturer’s logo .
The best thing you can do is change its battery and hope that once it turns on, it doesn’t stay at the power-on logo. It is something simple that you can apply if your tablet does not start or you cannot hard reset it.
Operating system or software failures
This is the main reason why the tablet does not start and, therefore, it tends to stay at the power on logo or the manufacturer logo. In general, a hard reset is used, but in the worst case, a new ROM downloaded from Google will have to be installed .
If you do not know how to do this, it is best to go to Lenovo technical support or go to a specialist in this. It is likely that, if you do it on your own, it will happen that the tablet does not turn on, it stays at the logo .
Now, the failures can be as soon as the operating system starts, but the user cannot do anything else. It can also happen that all the applications have errors or that they run and after a certain period of time, they close by themselves. One possibility is that the phone has a virus and is causing this problem.
lack of updates
Believe it or not, the problem that the tablet remains in the manufacturer’s logo is due to the lack of updates. There is a reason why every Android smartphone or tablet tends to offer improvements and new versions of its operating system.
If at a certain moment the tablet does not start , you must think that it is due to a failure of this type. So once you manage to enter the device, try to update the services and everything that is pending. This as long as the equipment does not stay in the power on logo.
Programs with bugs
This is part of very common cases, especially in those users who download applications from Google pages that are not reliable. Usually, these apps are modified, so it is not surprising that a tablet does not boot after installing one of these.
The most feasible thing you can do is download applications and then scan them with a good antivirus. This will reduce the chance that the tablet won’t turn on and stays at the logo.
Of course that is not always the case. Once the tablet does not start by conventional methods, it will be necessary to use special programs and for this, it is recommended to have knowledge in programming and avoid that the device remains in the manufacturer’s logo.
Is this a problem without a solution?
No, and it is that for many Android tablet users, the frequent problem that they present when they do not start and the tablet remains in the manufacturer’s logo.
Sounds like the end of the world, right? Your tablet won’t boot up and stays at the power on logo, it can spend hours static at the Android Logo. Most likely, you will feel that it is an indication to go to the technical support of the Chinese tablet.
It even crossed your mind to do a reset or that, in short, it broke down and should be replaced with a new one. It doesn’t matter if it’s Samsung or Lenovo branded tablets, what you need is a good device without problems with its operating system .
What if I told you it’s not necessary? In this opportunity, I will teach you how to solve this problem. Truth be told, it’s as serious as you’d expect. The best thing is that you can solve it from the comfort of your home and prevent it from being left on the manufacturer logo or the ignition logo
Sure, as long as it’s not a serious problem with the device’s software or hardware. So shortly we will give a solution, once the tablet does not turn on it stays at the Android logo.
How to fix my Lenovo or Samsung tablet power on issues?
Before you can read the information to solve technical battery, software or hardware problems quickly and easily, I will offer you a possible solution.
You should try to access Recovery Mode by pressing the Home or Power keys and the Volume key on your Tablet. You must do this process until you manage to enter the special user menu.
But if after trying it your tablet still does NOT start, it is still stopped at the Android logo and you did not see any solution, then I leave you the solution.
When the tablet does not start, try changing the battery, make sure it is new or in good condition. If even with this the tablet does not turn on it stays at the logo , try with it but now connecting it to the outlet.
Another alternative is to press one of the volume buttons together with the power button. If the tablet does not start with this, you will need to take it to a technical support. Let them check the board for hardware faults.
What should I do if my Chinese tablet stays at the Android logo?
In the event that your tablet does not turn on and remains at the logo, there are a series of steps that all users can carry out. This works for both Samsung, Lenovo devices and any other Chinese tablet brand.
- The first thing you should do is connect the device with the USB cable to your PC, this in case the tablet does not boot. Make sure your battery is fully charged.
- Download the following program that you can access by clicking.
- After running it, a window will appear. There you must enter the number 1 and your device will be detected. In case the Tablet is not found, try disconnecting and connecting it. Also close and open the program until your device can be detected in the operating system.
- After detection, type number 5 press ENTER and wait for some time.
- After this process, the Chinese, Lenovo or Samsung tablet will reboot. Wait for the reset to finish, and then type the number 2. Press ENTER again to then type the number 6.
At the end of this process, your Tablet should start. It is important to mention that the device will take between 3 or 4 minutes. You must be patient and not interrupt the procedure or you will have to start over. You will see with your eyes how the problem that the tablet remains in the manufacturer’s logo is resolved.
What is a bootloop and how can we fix it?
Samsung Tablets with the Android logo are work tools that are currently essential. The ideal is to keep them operational. However, it is not uncommon for them to present one or another technical problem in terms of the manufacturer’s logo or the software itself.
Due to the aforementioned, we want to give you some easy-to-execute options to solve the inconveniences. Tablets with Android operating system usually stay at the power logo and do not finish turning on. This may lead to battery discharge and the user may not be able to use device functions.
A bootloop is a common error , which consists of the device turning on after being turned off and repeating the same thing without stopping. Usually the power logo appears, then the Android logo and the manufacturer logo. Only this is repeated until it runs out of battery.
practical solution
A simple and fast alternative is based on accessing Recovery Mode. You can search Google for information or press the Home and Volume keys simultaneously. If it doesn’t work, there are other options to consider. Then follow the instructions step by step:
- Connect your Tablet with the USB cable to your PC.
- Download the following program by clicking on this link.
- Install the program and run it.
- In the window that will be displayed, press the number 1, so that the device is detected.
- Proceed to type the number 5 and press enter.
- The equipment will restart, press the number 2.
- Lastly, type the number 6 and then hit Enter.
- Wait a few minutes for the reset to finish and that’s it.
With all this information it should be enough for situations where the tablet does not turn on, it stays at the logo . Similarly, you can explore other options that we have not mentioned in case your tablet does not boot or if the tablet stays at the manufacturer’s logo.