Programming a remote control or universal control is quite useful if you have several televisions of different brands in your home, since they can be synchronized with a wide variety of models, be they the most modern smart televisions or the most contemporary. Just program it, which takes a few seconds, and you can use it freely.
However, to tune it with a television, it is necessary to enter some parameters indicated in the instruction manual, such as a television code that is used to synchronize the universal remote with the television according to its manufacturer’s brand. The problem is that sometimes some codes are missing from the manual or they just come without a manual. In this article you will learn how to program it without any of these requirements.
How Can I Program a Universal Remote Control Without Code or Instructions
Index( )
- How Universal Remotes Work
- How to program or set up a universal remote without instructions or code
- automatic search
- use internet
- How to make a universal remote work
How Universal Remotes Work
Universal remotes are remote devices that allow you to operate different electronic devices, mostly televisions and VCRs. Its functionality makes it possible to control several devices using the same remote control to send orders and manipulate them.
How do they manage to connect with so many devices? Through a numerical code specific to each manufacturer and type of device. These codes serve to identify the frequency that the device receives , synchronizing the control to the same infrared frequency to work in unison.
What the universal remote does is set itself to a specific frequency (depending on the code) to connect with your TV, VCR or sound system. A similar technology is used by modern smartphones, in which you have the option to configure your Android phone as a universal control .
The list of codes can be found in the instruction manual of the control. If you don’t have it, you can look it up online, although the same codes are not always compatible for all universal remotes . In case you don’t have the manual or the codes, don’t worry, you still have an alternative to configure your universal control.
How to program or set up a universal remote without instructions or code
Having a universal remote and not having the codes can be the same as having no remote at all. So that you do not have to deal with this problem, we present a couple of methods so that you can program your universal control even if you do not have the manual with the codes. Remember that some steps may vary depending on the brand of control.
automatic search
Most universal remotes have a search button that does an automatic scan to find the correct frequency for the device in front of you. The button is usually next to the power on the controller and only works within a close range, so you should keep the controller close to the device you want to sync.
It is important that the device is turned on for this method to work. A solid light will indicate that the controller is scanning . Once the correct infrared frequency is tuned in, the code will remain stored on the remote until you pair it with another device. However, it will be faster to configure it in the future.
use internet
On the net you will be able to find various control manufacturers pages with lists of codes that can work with your universal control . Some remote brands use different codes, so you’ll need to locate a site that is compatible with your universal remote.
To enter a code, just activate the settings button on the remote and set it for TV. This should turn on a steady light. And then dial the code obtained from the Internet . If it was set correctly, the light will turn off; if there was any error, the light will flash several times.
How to make a universal remote work
If you’ve tried these methods and still can’t get your controller to work, try pairing it with other devices. The problem may be an incorrect code or incompatible with your universal remote model. In that case, you ‘ll need to look for a different list of codes . If your control is Cablevisión, learn how to configure it to take advantage of it.
Some universal controls have a USB connection that allows you to directly access their manual and solve any operating problem. Alternatively, you can download an app to control your TV from your phone conveniently, even if it’s an old TV .