Learn the basics you need to know about setting up Linksys by Cisco routers. Here’s how you can take advantage of all the features of your WiFi.Setting up a Wi-Fi router can seem like a difficult task at first glance. Technical terminology, complex menus, and the devices themselves can give you the impression that it’s a procedure only suitable for tech experts.
However, regardless of your previous experience, you can successfully complete this task because the process is very simple. All you need is Internet and a computer or mobile phone to access all the parameters of your router without complications .
Of course, the process may vary depending on the company and the model. In the case of Linksys by Cisco, it will only take a few minutes if you follow the steps correctly. It doesn’t matter if you don’t know anything about it, in this article you will find everything you need.
How to access the Linksys interface
All Linksys devices have an interface that you can easily access from your preferred browser. You can do this from your PC or smartphone and just type “192.168.1.1” into the search engine and press Enter while you are connected to the corresponding WiFi.
When you enter this page, you will be asked for a username and password, both of which are usually “admin” . If this is not the case, then you should check the manual or contact support directly so they can tell you what the details are.
Once you’ve set them, click Start and you’ll be in the Linksys interface just like that. Now, to link your WiFi , you need to find the PIN number located on a label on the bottom of the device and enter it into the instructions on the page.
On the other hand, you have the option to synchronize using the arrow button located in the central part of your router, just follow the instructions on the page to connect.
How to configure basic Linksys by Cisco WiFi setting
Once you’re in the interface, you’ll see a bunch of features available, but you don’t have to worry. The basic setup to get everything running smoothly is to follow the standard Internet Setup method .
Well, in the main Basic Setup screen you have to select Automatic Configuration – DHPC so that everything adapts automatically. In turn, you need to check the Enable box for DHPC Server.
In the Starting IP Address section you should write “100” and in Maximum Number of DHCP Users , “50” as maximum, which is recommended.
The Basic Setup section should now be ready and you should now access the Wireless section . Here you can re-sync your WiFi if there is a problem from Wi-Fi Protected Setup . On the other hand, it is best to activate the Wireless SSID Broadcast option .
Regarding the Wireless Channel , choose the one you want, although 4, 6 and 11 are the most used channels due to the GHz they offer.
With this, your WiFi router should be working correctly and if you want to see the information of the current one that you have modified, simply go to the Status section and the parameters will appear there.
How to put a password on a Linksys by Cisco WiFi router
Security is one of the most important things as there are intruders out there who surely want to take advantage of your Internet through wireless connection.
If you want to learn how to spy on the devices that are connected to your WiFi or set a password so that no one else can access it , there is a quick and effective process that you can follow.
From the same Linksys by Cisco interface, go to Wireless > Wireless Security settings . In this section you will find several modifiable features, from the type of security you have on your network , to the name and password it allows.
The idea is that you select “WPA2 Personal” in Security Mode and “TKIP+AES” in WPA Algorithms . With this you should be able to modify your password from the WPA Shared Key input .
However, the WiFi network name can only be changed in Basic Wireless Settings>Wireless Network Name (SSID) .
When you are done making changes, click the Save Settings button to confirm.
How to block devices from your Linksys by Cisco WiFi router
If setting a password isn’t enough to stop those who want to steal your WiFi , then it’s best to know the filter and block function for devices . Linksys by Cisco has the ability to isolate any Smart TV, smartphone, console or computer from the network.
To do this, go to Wireless MAC Filter and click the Enable box . This will display all the options. Then, check the Prevent Pcs Listed Accesing the Wireless box to continue.
Now click the Edit MAC Filter List box and a window will open with the list of blocked devices . If you don’t have any yet, click the Wireless Client MAC List button to see all the devices that are connected or frequently connect to the network.
In this section you need to check the box for all the devices you want to block . When you are done, confirm the process with Update Filter List > Save Settings and then Save Settings again.
By doing this, none of those devices will be able to access your WiFi again . In case you want to undo the blocks, it is the same method, but unchecking the boxes in the list.
Basically, these are the things you need to consider when setting up any Linksys by Cisco type WiFi router .