How to reset your Xbox Series X and Xbox Series S controller?

After 20 years of development in the video game console market, the new Xbox Series X and Xbox Series S are presented. These are next-generation consoles with an attractive technological level. That, however, does not eliminate the presence of problems that may complicate its operation . For this reason, when these problems affect the command, it is necessary that you know how to solve it.

Index(  )

  1. What is the process to restart your console controller correctly?
    1. Completely turn off the controller
    2. Turn off the console and unlink the controller
    3. Turn on your Xbox and press the pairing button
    4. Activate the pairing of your controller
    5. Verify that your controller and your Xbox are paired
  2. How to update the controller if it keeps crashing after rebooting?
  3. How to fix a control that turns off automatically and for no reason?
    1. Replace the batteries
    2. Connect the controller to your console with a Micro-USB cable
    3. Disconnect your console
  4. What are the solutions available for a remote that won’t turn on?
    1. Verify that the battery contacts work
    2. Firmware update
    3. Contact Xbox customer service

What is the process to restart your console controller correctly?

Wireless complications exist, even on the innovative Xbox Series X and Xbox Series S. So, you’d better consider the following process to reset your controller without failure :

Completely turn off the controller

It is and will be the first thing we should do. As easy and simple as it is, it could solve the problem. In the center of the controller is a button with the X icon . Just press it for about six seconds and you’re done.

Turn off the console and unlink the controller

Now, to completely deactivate the link from the device to the console, you have to turn it off . Later, a reconfiguration will be required, which is done using a PC. When you finish this step, you can be totally sure that the unpairing of the controller is done.

Turn on your Xbox and press the pairing button

The next thing to do is turn on the Xbox and press the pairing button, located on the front. Pressing a couple of seconds, the system will be looking for the link with the active command.

Activate the pairing of your controller

Almost the same as the previous action, only this time in control. You can find the pairing button at the top. Again, you press it for at least two seconds to start syncing. In the process, the Xbox Series X / S logo will be flashing on both computers. The reestablishment of the connection will be done in a few seconds.

Verify that your controller and your Xbox are paired

If you have followed the entire process up to here to the letter, there should no longer be any flaws. It would be enough to see if the light on the controller stopped flashing and if all its components respond. If this is not the case, it is best to repeat the entire process from the beginning to verify.

This will allow you to better synchronize your controller and thus be able to enjoy a better experience, since you can open your games more quickly without having to wait for the controller.

How to update the controller if it keeps crashing after rebooting?

One of the reasons for the failures is outdated firmware. Upgrading Xbox Series controller components is as easy as connecting them to the console via the USB port. The update will be done in the background, but you should be careful not to unplug them while installing .

How to fix a control that turns off automatically and for no reason?

One of the most common drawbacks is the tendency for the controller to turn off in the middle of a game. It can be due to several reasons , but all have their solution to try.

Replace the batteries

Prolonged use of the batteries, as you might expect, leads to the need to replace them eventually. A few new batteries may be enough to fix the problem.

Connect the controller to your console with a Micro-USB cable

When the problem persists even with new batteries, it is best to try a Micro-USB cable. Connect the controller to your Xbox Series with the cable and verify its operation. If everything goes well, it may mean that the fault is in the wireless connection of the controller.

Disconnect your console

In certain cases, the problem may lie with the console itself. To check if this is the case, turn off the equipment completely and proceed to unplug it . When you do, you can turn it on again, run the sync, and see if everything is working as normal. It should be noted that this flaw cannot be confused with the Xbox Series X error 0x87E10BC6 when running a game .

What are the solutions available for a remote that won’t turn on?

When you have a totally unresponsive device on your Xbox, consider some of the following solutions:

Verify that the battery contacts work

A worn or oxidized contact can affect the connection of the batteries. A very common situation is also that they are poorly positioned, so accommodating them may be enough to have your controller ready.

Firmware update

As already mentioned, updates are executed by connecting a USB cable . It often happens that the update in the background can be interrupted by various cases, generating serious obstacles to the quality of the command. Either way, it’s good to check if the firmware is up to date by accessing the configuration options on the system. In the process, they may ask you to activate developer mode on your Xbox to perform certain actions.

Contact Xbox customer service

In case you still have problems with it after having executed the procedures described here, you can contact Xbox support . The technicians will attend your report and look for a feasible way to fix the problem of your command.

by Abdullah Sam
I’m a teacher, researcher and writer. I write about study subjects to improve the learning of college and university students. I write top Quality study notes Mostly, Tech, Games, Education, And Solutions/Tips and Tricks. I am a person who helps students to acquire knowledge, competence or virtue.

Leave a Comment