The Xbox console from the well-known Microsoft company has become a titan in the world of consoles. They have innovated in technologies to the point of being able to download games with the console off and use wireless controllers, but these controllers can sometimes fail and it is good to reset them at a certain point.
How to Reset an Xbox Series X and Xbox Series S Controller Quickly and Easily?
Index( )
- How to reset Xbox Series X and Xbox Series S controller easily?
- turn off your remote
- Turn off the Xbox and unpair your controller
- Turn on your console and press ‘Pairing’
- Activate ‘Pairing’ on your controller
- Make sure your controller and Xbox are paired
- How to update your controller if it doesn’t respond after resetting it?
- What to do if a control flickers and turns off for no apparent reason?
- Put new batteries
- Use a Micro-USB cable
- Disconnect your Xbox for a moment
- How to fix a controller that won’t turn on?
- Fits the battery contacts
- Keep the firmware up to date
- Get help from Xbox Support
How to reset Xbox Series X and Xbox Series S controller easily?
Resetting an Xbox controller is quite an easy task and may become necessary, as if your controller is linked to your console for a long time, connection failures can occur.
Some common failures are the delay or delays when executing actions. Clearly these failures can be fatal when playing video games , especially in high-tension situations.
turn off your remote
The failures that your control may present can often be fixed with the simple action of turning your control off and on.
This process is easy and is that once you have your Xbox Series X or Series S control in your hand, simply press and hold the middle button (The one with an X) for about 5 to 6 seconds. After the above, the remote will turn off, then press the same button for a few seconds and the device will turn on again.
Turn off the Xbox and unpair your controller
If you want to completely unlink your controller from your console, the first thing is to turn off your console and then connect and configure your controller with a pc . Once this process is done, your control will be completely unlinked from your console. In any case, connecting it to the PC is optional.
Turn on your console and press ‘Pairing’
Re-pairing your controller with your console is easy. And it is that your console has an integrated button called ‘Pair’, you can recognize it because it has a circle with 3 slightly curved lines. Pressing that button immediately paired your Xbox with the controller you want to pair.
Activate ‘Pairing’ on your controller
As with the console, the Xbox Series X/S controller has a pairing button, which is located on the top left of the controller. By holding it down and pressing the button on the console, you can pair both devices (You can also pair it by connecting it with a cable to your Xbox).
Make sure your controller and Xbox are paired
If you did everything as explained above, your controller should have been paired with your Xbox. Checking this is easy, as the controller should start responding when used with your Xbox. If that doesn’t work, try unlinking it again and repeat the steps above.
How to update your controller if it doesn’t respond after resetting it?
This is something that can cause you problems and that is, what happens if after resetting your controller it does not respond? The best we can do is update our controller . To do this, we can connect the control to the console via USB and update it from there.
What to do if a control flickers and turns off for no apparent reason?
If your controller has these bugs, stay calm, as they are possibly small and easy to fix glitches . They may be battery or connection failures, in which case, it is not a big problem. However, if that is not the case there are also other causes and possible solutions.
Put new batteries
The first thing you should do is change the batteries in your controller. Over time batteries can discharge or go bad, causing failure. To fix this issue, simply open the cover on the back of the controller and swap out the new batteries.
Use a Micro-USB cable
The other solution you can try is to connect the controller using a Micro-USB cable , which is useful when it is a wireless connection problem. It is also useful when we have a problem with the batteries, since the control will be powered directly by USB.
Disconnect your Xbox for a moment
If you’ve done all of the above, but the controller keeps blinking and turning off, you should try turning off your console for a moment and unplugging it . It may happen that the failure is from the console. Many times a simple restart fixes connection errors between the console and the controller.
How to fix a controller that won’t turn on?
If you have a controller that doesn’t turn on directly, lights don’t blink or simply shows no signs of life, it may simply be a problem of poor current contact or that your controller is failing. Next, we will tell you how to test if it is simply a bad contact or if you have to resort to more important solutions.
Fits the battery contacts
The easiest solution is to check the battery contacts , as these contacts can sometimes move or open a bit more, causing the remote to not turn on.
The first thing you should do is remove the back cover of the controller and check with the batteries installed if there is good contact. If this is not the case, arrange them to have a proper contact (Also check if the poles of the batteries are correctly oriented, Positive-negative).
Keep the firmware up to date
If adjusting the battery contacts your controller still does not turn on, try updating your Firmware . If you don’t know what a firmware is, it’s best to learn it before taking action. In any case, in recent years the company has focused on making the firmware update very simple.
Get help from Xbox Support
As a last resort, try writing to Xbox support to see if you and them can find a solution. If in doubt, Xbox support is the way to go if no home solution works. It is certainly the most recommended when there are serious problems with your console or controller.