If for some particular reason you want to expand your use of your Mac , you are probably wondering, How can I install Windows 10 on Mac using Boot Camp assistant? Here we will explain precisely how you can do this process.
Boot Camp is a utility that comes by default in many of the Apple brand computers. This applies only to models where the processor is from Intel. With this program we will make the process extremely fast and simple and we will be able to install Windows 10 in a few steps. Which provides some advantages over the Mac system.
Index( )
- Is it legal to install Windows on an Apple brand computer?
- What Mac models support installing Windows?
- Requirements to install Windows 10 on a Mac
- What are the differences in virtualization?
- Install Windows 10 step by step
- Check the Secure Boot settings
- Create a Windows partition
- Format Windows using Bootcamp
- Reinstall Windows
- Open Bootcamp and finish setup
- How to switch or switch between Windows and Mac OS that easy
Is it legal to install Windows on an Apple brand computer?
Yes, it is absolutely legal, to install the Windows operating system on any Apple brand computer. There is an agreement between the companies Apple and Microsoft so that this installation does not have any type of legal problems. In fact, Apple computers have an application installed that is focused on installing Windows.
What Mac models support installing Windows?
Almost all current computers created by the Apple company, support the installation of the Windows operating system. Specifically, almost all Mac computers from the 2012 or later generation . However there are some non-computers that cannot perform this installation. These computers are the Mac mini, Mac Book Air, and Mac Book Pro. They are all late 2020 and contain an M1 chip.
Requirements to install Windows 10 on a Mac
To install the Windows 10 operating system on a Mac computer, the computer must meet some requirements. First of all, we must think about how much space we will assign to the system to install. This is because it can only be done once and later we will not be able to modify this unless the process is started from scratch . This will also depend on how much space your computer’s hard drive has and how much you will use Windows.
To get started, the primary requirement is to have enough free space on your hard drive . This space must be greater than 60 GB of memory, although the Apple company recommends that it be greater than 128 GB.
In most cases, when you want to install this type of thing, it is to run certain programs that are not available in Mac OS. So you will have to consider the type of program. This is because there are applications that need a lot of free storage space to be able to function.
Similarly, if the installation is done on a desktop computer, you must have a mouse and keyboard. In addition, you need a completely empty USB memory with a capacity greater than 16 GB of memory. Although there are some Macs that do not require a USB memory.
Boot Camp allows us, as we know, to install Windows natively. So we will not have to resort to a virtual machine or emulate the system at the same time the Mac starts. For this installation, it is necessary to follow a series of simple steps.
If your computer doesn’t have a lot of free space, you can do a bit by uninstalling some programs that you don’t use often. This will make the process much more optimal and faster.
What are the differences in virtualization?
There is no difference when using the Windows operating system on Apple computers. Since it works similar to when this system is installed on a Microsoft computer. In this sense, you will have all the functions, accessibility and handling of Windows 10 only in hardware created by Apple.
Install Windows 10 step by step
After you have made sure you have all the requirements to install Windows on a Mac, you can proceed with the installation. To install the Windows 10 system on a Mac, you must also follow a series of steps, this must be done with great patience to ensure that the installation is done correctly .
Depending on the model of your Mac, you will have to install the system on removable memory. It is recommended that it have at least 8GB of space, this because the Windows 10 ISO is usually somewhat heavy. You can prepare the pendrive by formatting it to delete any file that we are not going to use.
In these cases, you can create the installation disk from Boot Camp itself. By clicking on create disk, in case your computer has the automatic installation option, you will not need a USB and you will only have to download the ISO image of the system from its official website. In either case you will have to open the Boot Camp utility and open the image from here, then you will have to allocate the disk space and click on next.
Check the Secure Boot settings
First you have to configure the safe boot configuration, or at least check that the option is activated. For the procedure of installing Windows 10 on an Apple computer, it is necessary that the boot is activated in total security. If not, and the configuration is in the option without security, you must change it back to full security to be able to install.
Create a Windows partition
Subsequently, the hard disk partitions must be created. This can be done through the application that the computer already brings called Boot Camp. You just have to carefully follow the requirements that the system asks of you.
At one point it asks for the introduction of the USB memory that you must insert into the port. In the same way, the application will require the size of the partitions, therefore you must remember the requirements previously established regarding the memory space of the hard disk. You must put a size that is of great storage capacity since this size cannot be changed later.
Format Windows using Bootcamp
Once you have created the partition, continue the process of formatting the created partition. The computer after dividing the hard disk does an automatic restart. Later, when it is starting, it will ask where the Windows is going to be installed . Therefore, at this point you must choose the partition made earlier called Boot camp and then select format. However, in many cases the system does not ask and makes the selection of the partition automatically.
Reinstall Windows
Subsequently, the installation of the operating system must be done. For this, all external memories must be disconnected from the computer and patiently follow the installation instructions.
By doing this, the program will begin to download some necessary add-ons so that the new system runs smoothly and runs perfectly. When this is done, the computer will reboot and start automatically from the Windows installation. From here we will do the installation, you just have to follow the instructions of the installer. With giving in next several times it will be enough.
When it is finished we will be able to name the equipment and the computer will restart again. This time it will reboot into Windows 10 to finish downloading the necessary add-ons and installing the system. Remember that you can always make the computer restart automatically on Mac before Windows.
Open Bootcamp and finish setup
When the installation is complete, as the Windows operating system is new, you will not have the application installed. Therefore, a window appears here to install Boot Camp again and to install it you must also follow the simple requests that it will require.
Later, when the installer finishes, it will restart the device once more, and finally load the desktop. From here we will have to open the installed Boot Camp application so that it downloads a few necessary library where you must finish configuring the system that you have installed.
This process will depend on your internet, so it can be very fast. When it is finished you will be able to use the system completely freely and you will be able to carry out any type of installation on it.
As we said at the beginning, at this point you will not be able to add or reduce the space you allocated for this system. So if you run out of space, you only have to delete some files or reinstall from scratch.
How to switch or switch between Windows and Mac OS that easy
Now you have both systems installed on the computer, the IOS that comes with the Mac and Windows computers by default. So you can log into both whenever you want or need. To make the change from one system to another, you must restart the computer.
Then, as soon as the computer is starting up again, you must hold down the Alt key or the option key. This action will take you to the selection tab where you must choose which system to start the activity with.