Sometimes it is necessary to flash the router and refresh the driver. There are no difficulties in this: a short guide on the firmware of devices released by the popular ASUS company will help. You don’t have to download any additional programs. The guide is suitable for all brand models.
Necessary actions for the firmware
This section will tell you about the steps a user will have to go through to flash an ASUS router . First of all you will need:
- PC or laptop;
- power cord;
- the device itself.
First of all, you should determine the exact model, and also the hardware version of the device. This will help you find the firmware you need, and then download it from the ASUS official website.
Important : in order to install the modern version of the software, you need to find out if there are any updates for the device that the owner is going to reflash.
After everything is downloaded to your computer , you should connect an ASUS device to it using a network cable. The last stage is uploading new firmware.
Educational program : How a router works: the principle of operation and the device of a router in 6 sections
Several important nuances
- Before moving on to specific actions, a user who wants to reflash his ACS router should take into account the following points. They will help you not to screw up, but to do everything quickly and correctly. In order not to look for the firmware, you can go to the settings of the router and check if a new version of the software is available. This method only applies to routers that are already configured. However, it should be borne in mind that such an update check can be deceiving. But you can roll back to the old version.
Tip : If you want a good, but inexpensive router for your home, the RT-N12 + will do just fine. It is capable of transmitting three hundred megabits of information in an instant.
- If you want to update the router software just before configuring the device, you will need to search for a new firmware version first. Or proceed as in the first paragraph: first configure, and then update.
Note : Don’t worry about the settings getting lost after the firmware update. They will be saved, so you won’t need to tinker with this task again.
- It is necessary to download the firmware, which is tailored for a specific device model – this is almost the most important point. Otherwise, the router will not work. Of course, downloading everything from extraneous resources is dangerous: at least a virus can be caught. The best option is the official website.
- Despite the fact that there are no prohibitions on the firmware of the ASUS-branded router via Wi-Fi, it is undesirable to do this: it is better to do it via a wired connection. The fact is that if, during the installation of updates, the user discovers that he is installing the wrong software or just something goes wrong, then the router can go into emergency mode. Then you will have to restore it using a special utility, and it’s not a fact that it will work.
Recommendation : Dual-band high-speed models like the RT-AC68U are good for the office . It transmits via Wi-Fi almost 2 gigabits per second, and there is also access to the corporate cloud.
Find out : How to open ports on a router: instructions and 3 ways to solve possible problems
Find out the model
To download the correct firmware for your network equipment, you need to know not only the company, but also the exact model name. Usually, the manufacturer leaves a sticker on the bottom of the case, where this information is indicated. If there is no sticker, then you can see the exact name on the box or in the technical documentation of the device from ASUS.
If this is not the case, then you can look on the Internet. This method requires the router to be connected to a laptop or computer. A local connection must also be configured.
| What to do | How to do |
| Find out the ip router | On the PC, open the “Status” column |
| Select “Details” or “Details” | |
| View Title | Enter the ip into the address bar (it looks like this: “192.168 …”) |
| An authorization request will appear, which will display the full name of the router, for example, RT-AC1200. | |
See also: Best WiFi routers TENDA: TOP-8 routers and manufacturer’s lineup
Find out the hardware version
Like the model of the device, it can be spied on a sticker located on the bottom of the case. You can also see the hardware revision in the technical documentation or on the box.
Tip : for offices, small hotels, the RT-AC88U AC3100 is an excellent option . This monster is capable of providing a Wi-Fi speed of more than 3000 megabits per second.
If there are no identification marks on the router, and the documents are lost, you can view the information as described in the table above. The only difference is the need for authorization.
Important ! Some people advise you to open the case to see the model name and find out the hardware version. It is not worth doing this: it is not a fact that such information will be on the internal stickers, but the guarantee for the router will definitely be canceled.
Useful : How to set up a router as a switch: instructions in 12 easy steps
Search and download firmware
When both the full name and the version of the device are known, you can start searching for the required software. How to proceed – in the table.
| What to do | How to do |
| Visit the support page on the official ASUS website | Enter http://www.asus.com/support/ in the address bar |
| Find the firmware for your router | · Enter the router model in the search bar, for example, RT-AC750 , and click Enter. |
| · In the drop-down list of devices, you need to find your own and click on Driver & Tools under it. | |
| Select operating system | Click Others. |
| Download new firmware for ASUS router | · First click on Firmware and find the new firmware. This is usually the topmost of the list. |
| Note : The user may already have the latest version. To find out, just check the firmware version on the website with the one installed on the router (you can see it in the settings). | |
| · Click Global and save the software archive to your computer. | |
| Unpack the archive | Extract the firmware file in .trx format |
| Ready! Now you can start updating. | |
Life hacks: How to increase the speed of the Internet through a Wi-Fi router network: 7 real ways
ASUS Router Firmware Updates
To update the firmware, you need to connect a router to your PC. As mentioned above, it is better – using a cable, and not via wi-fi. As in the previous section, the procedure is described in detail in the table.
Recommendation : when buying a router at home, as in any other case, you need to take into account the number of devices that will work via wi-fi. A good and inexpensive option for home is the RT-N11P . It has good speed and a stable signal.
| How to update the firmware of an ASUS router | |
| Dial the address 192.168.1.1. in the browser search bar | To enter the settings, you will need to enter your username and password in the appropriate fields (if the user has not changed anything before, then these will be the standard admin and admin). |
| Run firmware update for ASUS router | In the router settings, go to the “Administration” – “Firmware update” tab. |
| Click “Select File”. | |
| Select the file of the firmware downloaded earlier to the computer. | |
| Click “Send”. | |
| Wait for the update to complete. It is important not to press or disconnect anything at this time, so as not to disrupt the process. | |
Interesting : the dual-band RT-AC87U is capable of providing a total network bandwidth of 2334 Mbps.
When the update is over, the router’s main settings page will open. Right there, in the “Firmware update” section, you can check using the appropriate button if there is new software, and also see the version of the current one. The main thing is that the Internet is connected.
Related: 10 best ASUS WI-FI routers
As you can see, it is not difficult to flash a router manufactured by ASUS. To do this, you just need to know exactly what the device is called, and also connect it to a PC using the LAN. The update will also be easy.
