There are many tips to alleviate damage to your mobile, but not all of them work. In this article we show you which methods are effective when saving a wet mobile so that it remains operational. Take note of the following tips to try and save your device.
How to dry a wet mobile
If due to carelessness or bad luck, your mobile falls into the water, do not despair; We explain how to dry a wet mobile step by step.
1. Say goodbye to warranty
If you take your wet mobile to a technical service, the first thing they will do is refuse the free repair . And the guarantee does not cover water damage, not even in mobile phones that are resistant to it.
In addition, a wet mobile is difficult to hide because, inside, there is a mechanism that is usually a sticker that changes color when it comes into contact with water. So if the sticker has changed color, say goodbye to free repair, as the warranty is immediately void.
In this case, and especially if you have a mobile with a non-removable battery, the ideal is to try other solutions first to revive our mobile or prevent it from being completely damaged. In addition, we already know what will happen to us if we take it for repair.
If all these tricks fail, think about the possibility of having taken out insurance that covers these types of mishaps. It is the best way to keep it protected all the time, and thus the repair or acquisition of a new one will cover us.
2. Use rice
What to do if the mobile gets wet? Do I use the rice method? Surely you’ve heard of it on many occasions, and the reality is that it works as long as the internal flooding of the mobile is not too severe. Or let’s do it in time, because if there are two enemies of the wet mobile, they are short circuits and corrosion.
In the first case, it is solved by turning off the mobile immediately, and in the second by removing the water as quickly as possible. For this reason, it is important to make a distinction between normal falls into water, such as under a tap, a fountain, or a river, and in salt water. The latter is very harmful to a mobile phone, as it causes immediate corrosion.
Salt water deteriorates jewelry, erases bass suits, and kills electronic devices. Therefore, if the phone falls into salt water, the first thing to do is submerge it in mineral water to remove the salt.
The rice method on a mobile with a non-removable battery would not be as effective. This is because rice absorbs moisture, but to apply it correctly you must disassemble the wet mobile and remove everything removable from it. Afterwards, you must bury the phone in rice and let it act.
It is a slow method, because sometimes you have to leave it for up to two days and it may or may not work, depending on the water that has entered it. After this time, reassemble all the parts of the wet mobile in their place and turn it on to see if it has worked. By the way, rice is effective, but better to use oatmeal, silica gel and even cat or beach sand.
3. Using alcohol
Another effective method to save a wet mobile is isopropyl alcohol, although it is paradoxical that we have to submerge it to save it from a dip. This is possible because the alcohol, which evaporates without a trace, also carries the water with it.
Alcohol with high levels of purity evaporates without a trace, dragging the water with which it comes into contact with it. So if you don’t know what to do if the mobile gets wet to quickly remove the water from the electronic circuit, pure alcohol will be a great ally .
Immerse the mobile soaked in alcohol and leave it for a couple of minutes so that it reaches the same places as the water. Better to do it with the phone turned off and the battery removed, so if you have a mobile with a non-removable battery it is better to discard this method.
Lastly, take the phone out of the alcohol and wait for it to dry completely. You will know when there are no traces of alcohol odor.
4. Don’t apply heat
If you don’t know what to do if your phone gets wet, don’t try to apply heat in any way. Cell phones have electronic circuits that could be damaged. And it is that electronics work better the colder the circuits are. Also, metal and plastic parts could melt from excess heat.
Forget using dryers, stoves, ovens, or microwaves . When facing a wet mobile, keep it away from heat sources or you will end up with a disabled phone for trying to save it.
5. What to do if the mobile gets wet
If there has been no short circuit when it comes into contact with water, or internal corrosion occurs, you can save it. In case you have used the previous methods without success, you can try to put the mobile in an airtight bag together with anti-humidity balls.
Saving a wet mobile is difficult, especially if it is a mobile with a removable battery, but it is not impossible. In addition, it will always depend on the amount of water that has entered the terminal. Even if your mobile is submersible, water can destroy electrical devices, so it is better not to get it wet.
Finally, be very careful with what to do if your mobile gets wet, let’s not make the situation worse instead of solving it.
