How to fix Windows 10 update error 0x80070bcb?

by

Are you encountering 0x80070bcb Windows update error? If yes, this guide will help you solve the same problem. The 0x80070bcb error code occurs not only during Windows updates, but also during printer installation in new machines. With many users asking to fix the 0x80070bcb update error, we’ve collected effective troubleshooting guides to help you out of the jam.

How to fix Windows 10 update error 0x80070bcb?

Contents of this article

  • How to fix update error 0x80070bcb Windows 10
  • Method 1: Unplug the external device
  • Method 2: Make sure to update the minimum requirements
  • Method 3: Run the Windows Update troubleshooter
  • Method 4: Restart essential Windows services
  • Method 5: Repair System Files
  • Method 6: Delete the SoftwareDistribution folder
  • Method 7: Temporarily disable antivirus software (if applicable)
  • Method 8: Use Google DNS
  • Method 9: Uninstall recent updates
  • Method 10: Extend the system partition
  • Method 11: Clear Drive Space
  • Method 12: Reset Windows Update components
  • Method 13: Manually install the update
  • Method 14: Update via Media Creation Tool
  • Method 15: Adjust the Windows Registry
  • Method 16: Update the BIOS
  • Method 17: Perform a System Restore
  • Method 18: Perform a clean boot

How to fix Windows 10 update error 0x80070bcb?

There are few reasons for the error codes discussed in Windows 10 PCs. They are listed below.

  • The Windows version does not support upgrading PCs.
  • An incompatible external USB device is inserted.
  • Few essential services are not running.
  • Antivirus and adware are blocking updates.
  • There is not enough computer space.
  • Corrupted data, insufficient internet supply.
  • Outdated BIOS and very old computer.
  • Corrupted Windows registry and Windows file system.

Now, you know what caused the error in question. Follow the troubleshooting methods mentioned below to fix it.

Method 1: Unplug the external device

Solution for Windows 10 update error 0x80070bcb : When you encounter update error 0x80070bcb in Windows 10 computer, please check if you have any external peripherals or USB devices connected. If so, it is recommended that you remove it to avoid any EMI causing the error. Follow the directions.

  1. First, unplug any external USB devicesconnected to your computer .
  2. Then, disconnect the webcam device, printer, and other peripherals, leaving the most necessary devices connected.
  3. Finally, check if you fixed the update error 0x80070bcb.

Method 2: Make sure to update the minimum requirements

Windows 10 Update Error 0x80070bcb Repair Tutorial : If there is no hardware issue related to your computer, you have to make sure if update error 0x80070bcb Windows 10 is happening due to any internal issues. To successfully install the latest update on your PC, you must check that your computer meets the minimum requirements for the update. Your PC must meet the updated hardware and software requirements, and you can follow the steps below to ensure the same.

  • Processor:1 GHz or faster processor or SoC.
  • RAM:1 GB for 32-bit or 2 GB for 64-bit.
  • Hard Disk Space:16 GB for 32-bit OS, 20 GB for 64-bit OS. Updated May 2019, the space has been increased to 32 GB.
  • Graphics Card:DirectX 9 or higher compatible WDDM 1.0 driver.
  • Display:800 x 600.

Step I: Check System Requirements

  1. Press the Windows + I keyssimultaneously to open Windows Settings.
  2. Now, click System.
  3. Now, in the left pane, click About, then you can check the device specificationsas shown on the right screen.

Step 2: Check Graphics Card Requirements

  1. Open Settingsand tap System.
  2. Then, click Display in the left pane , and then click Advanced Display Settingsin the right pane , as shown.
  3. Now, click Display Adapter Propertiesas shown.
  4. Now, you will be prompted for details about your graphics card.

Step 3: Check the DirectX version

  1. Press Windows key + Rand type dxdiag,then press Enter.
  2. When your system already includes DirectX 12, the following screen will be displayed on the screen.

After reviewing all of these requirements, make sure they meet the requirements of the app you’re installing.

Method 3: Run the Windows Update troubleshooter

If there are any bugs and problems in your computer, you will not be able to update your Windows PC. Windows built-in troubleshooter to help you fix network connectivity issues, corrupt registry keys, and broken Windows components that cause update error 0x80070bcb can also be repaired by this tool. Follow the steps indicated in our guide on how to run the Windows Update troubleshooter.

Follow the demo to resolve the problem found by the troubleshooter.

Method 4: Restart essential Windows services

Some essential Windows services like Windows Update and Background Intelligent Transfer service must be enabled on your computer to avoid error code 0x80070bcb. The Background Intelligent Transfer service uses the available bandwidth to install any latest updates so that your computer only installs any updates when no other installations are in progress. If these services are disabled in your system, you are more likely to face the error in question. So follow the instructions below to restart essential Windows services.

  1. Enter servicesin the search menu and click Run as administrator.
  2. Now, scroll down and double click on Background Intelligent Transfer Service.
  3. Now, select the Startup typeas Automaticas shown.

Note: If the service status is Stopped , click the Start button. If the service status is Running , click Stop and start again.

  1. Click Apply > OKto save the changes. Check if you can install the latest updates.
  2. Repeat all these steps for other Windows services such as Cryptographic, MSI Installer, and Windows Update Services .

Method 5: Repair System Files

The fix for Windows 10 update error 0x80070bcb: If your system has any corrupted files, you must repair them before installing any updates. System File Checker (SFC command) scans and repairs any corrupt files in your computer. Deployment Image Servicing and Management (DISM) fixes Windows operating system errors using a powerful command line. To resolve update error 0x80070bcb, we recommend that you run the SFC/DISM utility on your Windows 10 computer by following the instructions in our guide on how to repair system files on Windows 10.

After completing the scanning process, check if the latest updates can be installed.

Method 6: Delete the SoftwareDistribution folder

How to fix Windows 10 update error 0x80070bcb? If you have ensured that the Windows update service is running and you are still facing update error 0x80070bcb Windows 10, then there is another easy workaround to fix the update issue. First, stop the Windows Update service and delete the SoftwareDistribution folder in File Explorer. Then start the Windows Update service again. Follow the instructions below.

  1. Start the serviceas administrator .
  2. Now, scroll down the screen and right click on Windows Update.

3A. If Status is not set to Running , skip to step 4.

3B. If the status is Running , click Stop as shown.

  1. Wait 2 to 3 seconds on the prompt screen, Windows is trying to stop the following services on the local computer…
  2. Now open File Explorerby clicking Windows + E keyssimultaneously . Now, navigate to the following path.

C:WindowsSoftwareDistributionDataStore

  1. Now, select and right-click all files and folders and click the Deleteoption.
  2. Again, navigate to the given pathand delete all files and folders.

C:WindowsSoftwareDistributionDownload

  1. Again, switch to the Serviceswindow and right-click Windows Updateand select the Start option.
  2. Wait 3 to 5 seconds at the prompt, Windows is trying to start the following services on the local computer…
  3. Finally, you restarted the Windows Update service, which deleted the contents of the Software Distribution folder. Check if you can install the latest updates on your Windows 10 PC.

Method 7: Temporarily disable antivirus software (if applicable)

Windows 10 update error 0x80070bcb fix tutorial : Antivirus suites can sometimes prevent any of the latest updates from being installed on your PC. Many compatibility issues were discovered by several Windows users, and they were difficult to fix. Antivirus software such as Norton and Avast may block any recent Windows updates, and it is recommended that you temporarily disable any built-in or third-party antivirus software to resolve this issue. Read our guide on how to temporarily disable an antivirus program on Windows 10, and follow the instructions to temporarily disable an antivirus program on your PC.

After fixing error code 0x80070bcb on your Windows 10 PC, make sure to re-enable your antivirus program as a system without a security suite is always a threat.

Method 8: Use Google DNS

Some users suggest that changing the DNS address helps them fix update error 0x80070bcb in Windows 10 computers. Google DNS has 8.8.8.8 and 8.8.4.4 IP addresses, which are easy to remember and allow a secure DNS connection between client and server. Here is our simple guide on how to change DNS settings in Windows 10, which will help you change the DNS address on your computer. You can also switch to any Open DNS or Google DNS on your Windows 10 computer by following our guide on how to switch to OpenDNS or Google DNS on Windows. Follow the instructions and check if you can install the cumulative update on your PC.

Method 9: Uninstall recent updates

Any previously incompatible updates in your Windows 10 PC may not allow new updates to download there. Therefore, it is recommended that you uninstall the latest update that is being installed on your computer to resolve error code 0x80070bcb. It is very easy to accomplish this task, the steps are as follows.

  1. Click the Windows keyand enter Control Panel. Then, click Open , as shown.
  2. Set View by > Categories, then click the Uninstall a programoption under the Programs menu as shown.
  3. Now, click View Installed Updatesin the left pane as shown.
  4. Now,search for and select the latest update by referring to the installation date and clicking on the uninstall option as shown below.
  5. Finally, confirm any prompts and restart yourcomputer.

Check if update error 0x80070bcb Windows 10 can be fixed.

Method 10: Extend the system partition

If the system partition runs out of space, you won’t be able to install any new updates on your Windows 10 PC. There are several other ways to increase your computer’s memory space, but they may not always help you. You have to extend the system reserved partition to fix update error 0x80070bcb. Although there are many third-party tools to increase the system reserved partition, we prefer to do it manually by following our guide on how to extend the system drive partition (C:) in Windows 10.

Method 11: Clear Drive Space

If your PC doesn’t have any drive space to install any new apps from Microsoft Store, you will face update error 0x80070bcb. So first check drive space and clean up temporary files if necessary.

Step I: Check Drive Space

To check drive space in your Windows 10 PC, follow the steps below.

  1. Press and hold the Windows + E keyssimultaneously to open File Explorer.
  2. Now click This PCfrom the left screen .
  3. Check the disk space under Devices and Driversas shown. If they are red, consider clearing temporary files.

Step Two: Run Disk Cleanup

If you have the minimum free space on your computer that is causing the update error 0x80070bcb, follow our guide on 10 ways to free up hard drive space on Windows to help you clear your computer of all unnecessary files.

Method 12: Reset Windows Update components

If no other options can help you, an effective way to fix error code 0x80070bcb is to reset Windows Update components. All Windows update files are stored on your computer, and if it gets corrupted or incompatible, you have to face several frustrating issues. To fix broken Windows Update components on your computer, follow our guide on how to reset Windows Update components on Windows 10.

This simple process involves running a set of commands at the command prompt to restart all essential Windows services on your Windows 10 PC. After executing all commands, check if the cumulative update can be installed.

Method 13: Manually install the update

Fixes for Windows 10 update error 0x80070bcb: If all the other solutions in this guide didn’t work for you, you can still download the required updates manually. The Windows 10 Update History webpage contains the history of all updates released for your Windows computer. Follow the instructions listed below to force-install the update.

  1. Press the Windows + I keysat the same time to open the settings in the system .
  2. Now, click Update & Security.
  3. Now, select the View update historyoption as shown below.
  4. In the list, make sure the KB numberis pending download due to a conflict error.
  5. Here, type the KB number in the Microsoft Update Catalogsearch bar .
  6. Finally, click Downloadcorresponding to your latest update and follow the on-screen instructions to complete the process.

Method 14: Update via Media Creation Tool

How to fix Windows 10 update error 0x80070bcb? If you are unable to install the update manually, you can try to install it using the Media Creation Tool. This is the official download platform recommended by Microsoft to fix any update bugs in Windows 10 PC. Follow the steps mentioned below to do the same.

  1. Go to the official download page of Windows 10 Media Creation Tool.
  2. Now, click the Download tool nowbutton under Create Windows 10 installation media .
  3. Run the installationfile and  click Yes at the User Account Control (UAC) prompt(if applicable).
  4. Now, click the Accept button in the Windows 10 settings windowas shown.
  5. Wait for the scanning process to complete and select the Upgrade this PC nowoption, then click the Nextbutton.
  6. Wait for the Windows ISO to download to your PC, then click Accept.

Note: You must wait until all pending updates from your computer are installed on your PC so that the Media Creation Tool can update your operating system to the latest version.

  1. Finally, click Installto complete the process.

Method 15: Adjust the Windows Registry

Windows 10 Update Error 0x80070bcb Repair Tutorial: Next, it is recommended that you clean the Windows Registry path corresponding to the Windows Update download path to fix the error code in question. You must always be careful with the Windows Registry or you may end up losing files. Follow the steps mentioned below to fix the discussed error by adjusting the registry key.

  1. Go to the search menu and type regedit. Then, click Run as administrator.
  2. Now navigate to the following path in Registry Editor.

HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindowsWindowsUpdate

  1. In the right pane, search for WUServerand WIStatusServer.

3A. If you can’t find them, you can’t delete the Windows Update download path. Proceed to the next troubleshooting method.

3B. If you can find the entries, right-click them and click Delete .

  1. Finally, restart your computer and check that you have resolved the issue in question.

Method 16: Update the BIOS

Some Windows 10 users around the world reported that the update error 0x80070bcb disappeared after updating the BIOS. However, if you have the latest version of the BIOS and still get the same error, you must reinstall the BIOS. If all of the above did not resolve your issue, I suggest you update the BIOS by following the instructions in our guide What is the BIOS and How to Update the BIOS?

After updating the BIOS, you will fix the update error 0x80070bcb Windows 10.

Method 17: Perform a System Restore

If you are not satisfied with any of these methods, the only option left is to restore your computer to a previous version. To do so, follow our guide on how to use System Restore on Windows 10, and follow the demo. In the end, your computer will be restored to its previous state with absolutely no errors.

After restoring your Windows 10 PC, check to see if the update error 0x80070bcb is fixed.

Method 18: Perform a clean boot

If your computer is dealing with severely damaged Windows components, an effective way to clear all of those damaged components and boot up your data is to follow the instructions in our guide How to reset Windows 10 without losing data to repair your installation PC. Follow the instructions in this article, and in the end, you’ll have the error in question fixed.

We hope this guide was useful to you and that you were able to fix update error 0x80070bcb in Windows 10 . Let us know what you want to know next. Please feel free to contact us via the comments section below with your questions and suggestions.

 

Related Posts: