The issue of Tribit XSound Go not loading can be caused by various factors. It could be due to a Bluetooth speaker software glitch, a faulty wall charger, a faulty battery, or a faulty speaker circuit. To fix this problem, you will need to perform a series of troubleshooting steps on the device.
The Tribit XSound Go is a portable Bluetooth speaker that is capable of delivering loud sound, making it perfect for outdoor activities. It has a waterproof design that allows you to take it with you to the beach or pool. Some of its features include a built-in microphone for hands-free calls, Bluetooth 5.0, and a 24-hour playtime on a single charge, just to name a few.
Tribit XSound Go Technical Specifications:
- Driver Size: 2 x 40mm, 1 x Passive Radiator
- Output power: 2 x 6 W
- Connectivity: Bluetooth V4.2
- Wireless range: up to 66 feet
- Battery capacity: 3.7V, 4400mAh
- Charging time: 4 hours at 5 V / 1 A
- Play time: up to 24 hours (varies by volume level and music files)
- Weight: 390g
- Dimensions (H x W x D): 56 x 59 x 170 (mm)
What to do when your Tribit XSound Go won’t charge
One problem you may encounter with your XSound Go Bluetooth speaker is when it doesn’t seem to be charging when you plug in your charger. This can be an annoying problem, especially if the speaker is running out of power, as you won’t be able to use it when the power runs out. Here are the troubleshooting steps you should take to fix the problem.
Also read: How to use a smartphone as a webcam
Also read: Set X mode on Asus ROG Phone 3
Method 1: perform a factory reset on Tribit XSound Go
Sometimes this problem is caused by the phone software freezing. In this case, a factory reset or hard reset must be performed, which will delete the data from this Bluetooth speaker and return it to its default settings.
Time needed: 2 minutes.
Restart the speaker
- Turn on the speaker.
You can do this by pressing the Power button.
- Press and hold the Volume + and Volume – buttons for 5 seconds
This will restart the speaker.
After doing these steps, try to verify that you can charge the Bluetooth speaker.
Method 2: clean the speaker’s charging port to fix the no-charging problem
Sometimes dirt or debris will find its way into this speaker’s charging port. When this happens, you can prevent your speaker from charging when you connect a charger to it. If you find dirt or debris in the port, you can remove it with a toothpick or simply by blowing it off. Once the speaker’s charging port is clear of debris, try to check if you can charge it.
Method 3: Replace the charger to fix the Tribit XSound Go not charging issue
There is a possibility that the charger you are using to charge the speaker is faulty. Some of the reasons a charger doesn’t work is if its cable is damaged or if the adapter itself has a bad circuit. Try using a different charging cable and wall charger to charge the speaker. If you have an Android phone with a micro USB charging port, you can try using your charger to charge the speaker.
Method 4: faulty battery
If the speaker battery is faulty, you will not be able to charge it. If this is the cause of the problem, replacing the battery will fix the problem. It is recommended that you do this at a service center.
Some of the reasons a battery will be damaged is repeated overcharging or constant exposure to heat, such as when you leave the speaker in the sun.
Method 5: faulty circuit board
The internal circuitry of this speaker will be damaged if it comes into contact with water. If this is what is causing the problem, it will need to be fixed at a service center.
Having the Tribit XSound Go with no charging issue can be a frustrating experience. Hopefully this solution will help you fix the problem.